Alcatel-Lucent ONE TOUCH X215 User Manual

User Manual

Table of Contents

Safety and Use...................................................................................................................... 2

Installation Guide................................................................................................................. 4

Main Interface Overview................................................................................................... 4

Entrance to Main Interface............................................................................................... 5

Connect to Internet............................................................................................................. 6

SMS Services (Text Message)............................................................................................. 7

Contacts................................................................................................................................. 9

Settings.................................................................................................................................. 10

Warranty ............................................................................................................................... 13

FAQs............................................................................................................................... ........ 14

Installation Guide for Mac............................................................................................... 16

 1

Safety and Use

We recommend that you read this chapter carefully before using your
modem. The manufacturer disclaims any liability for damage, which
may result as a consequence of improper use of the modem or of use
contrary to the instructions contained herein.

Traffic Safety

When driving, do not use the modem:
 When switched on, the modem emits electromagnetic waves that

can interfere with the vehicle’s electronic systems such as ABS
anti-lock brakes or airbags. To ensure that there is no problem,
please do not place the modem on top of the dashboard or within
an airbag deployment area.

 Check with your car dealer or the car manufacturer to make sure

that the dashboard is adequately shielded from modem RF energy.

Conditions of Use

1. Switch the modem off before boarding an aircraft.

2. Switch the modem off when you are in health care facilities, except
in designated areas. As with many other types of equipment now in
regular use, mobile telemodems can interfere with other electrical
or electronic devices, or equipment-using radio frequencies.

3. Switch the modem off when you are near gas or flammable liquids.
Strictly obey all signs and instructions posted in a fuel depot, petrol
station, chemical plant, or in any potentially explosive atmosphere.

4. When the modem is switched on, it should be kept at least 15 cm
from any medical device such as a pacemaker, a hearing aid or
insulin pump, etc.

5. Do not let children use the modem without supervision. The modem
may contain small parts that could become detached and create
a choking hazard.

6. When replacing the cover, please note that the modem may
contain substances that could create an allergic reaction.

7. Always handle the modem with care and keep it in a clean and
dust-free place.

8. Do not open, dismantle or attempt to repair the modem yourself.

9. Do not drop, throw or bend the modem.

 2

10. Do not paint the modem.

Collection Point:

This symbol on the modem means that it must be taken to
collection points at the end of their life:

 Municipal waste disposal centers with specific bins for these items of

equipment
Collection bins at points of sale.

 They will then be recycled, preventing substances being disposed

of in the environment, so that their components can be reused.

In European Union countries:
These collection points are accessible free of charge.
All products with this symbol must be brought to these collection points.

In non European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary
bins if your jurisdiction or your region has suitable recycling and
collection facilities; instead they are to be taken to collection points for
them to be recycled.
In the United States, please visit www.recyclewirelessphones.org for
more information on recycling wireless products.

Protection against theft

The modem is identified by an IMEI (modem serial number) shown on
the packaging label and in the modem’s dashboard. We recommend
that you note the number the first time you use the modem by opening
the dashboard “Settings” > “Diagnostics” to get it.

Disclaimer

There may be certain differences between the user manual description
and the modem’s operation, depending on the software release of the
modem or specific operator services.

 3

Installation Guide

Installation procedures may vary based on the operating system
installed on your PC. The following instructions are based on the
Windows XP OS:

Turn on your PC and plug the modem into the USB interface slot to
begin software installation. Windows should automatically detect the
new device and will prompt you to begin installation.

After following the prompts of installation setup, upon completion, a
shortcut will be placed on your desktop for quick future access.
Note:

1. If installation “auto-run” does not begin, you will need to locate the
“autoRun.exe)” file in the driver path, and Double-Click on
AutoRun.exe to run the installation manually.

2. A Micro-SD card is an optional accessory.

3. Please do not remove the USIM/SIM card and or the Micro-SD card
when the modem is in use.

Upon successful installation of the HSPA management program, the
program will launch automatically. You may also double-click the short
cut icon on the desktop to launch the program.

Main Interface Overview

Following table are listed Short Cut Icons in PC Suite Interface.

Interface Icons Provided Services

Home Home Page (Click on <Connect> icon from the

main window to connect/disconnect from the

Internet)
Contacts Display The Phones Book Interface
SMS Display The Text Message Interface
Browser Open the Browser
Settings Display the Settings manual

Following table are listed the Icons of status bar information

 4

Connection Statistics Icon Description

Network Signal Indicates the signal strength of the network
Network Status Indicates the network status. This will display the

operator name which the modem can find the
network. Or show the modem haven’t ready.< No
(U)SIM> or <NO Device>

Network Type Display in the status bar, to show you which network

you are using (GPRS / EDGE/ UMTS or HSPA)

Roaming

New Message Display the SMS status including new SMS/SIM card

Network Connecting



Roaming Icon “ ”, when the network is under
roaming

memory is full/Data Card memory is full

Connecting Icon “ “display in the status bar, when
the network is connected into internet network

Following table are listed the LED Indicates for each status.

LED Indicator Desctiption

Flashing Green & Red multicolour
circularly
Quickly Flashing Green & Red multicolour
circularly
Green Light Slow Flashing Registering into HSPA or UMTS network
Constant Green Light Registered to HSPA or UMTS network

Network Searching

Out of order

Red Light Slow Flashing Registering into GPRS or EDGE network
Constant Red Light Registered to GPRS or EDGE network

Entrance to Main Interface

The application runs automatically and the main window will pop up
when the modem will be connected. You can also access and run the
application from the <Start> menu.

If the PIN code is enabled, please enter the correct PIN code in the
entry field, and click on <OK>. You may try only 3 times to enter the
correct PIN code; after three incorrect attempts, the USIM or SIM card
will be blocked.

 5

A PUK dialog box will then be displayed asking you to enter the right
PUK code, PIN Code and Confirmed PIN. Click on <OK> if you fail to
input the correct PUK code after 10 attempts, you will need to contact
your service provider.

If the PUK and PIN code is correct, the application will be launched and
all features are enabled

Connect to Internet



1. Connecting with the default logon profile
If you want to connect to the Internet without setting any user-defined
or predefined profiles, press icon of “connect”. The default connection
profile will be used in accordance with your USIM/SIM card.

Connecting

• Click on <Connect> from the home page;

• Wait several seconds until the connection is established;

• Once you are connected, Icon of <Connect> will change into

<Disconnect>.

Disconnecting
Click on Icon of <Disconnect> from the home page to disconnect from
the Internet.

2. Connecting with a user-defined logon profile
Click on settle icon and select the <Connection Profile…> menu to
open the profile setting window.

Adding a new connection profile

• Click on <Settings> and select the connect Profile to add a new

connection

• If <ADD> is selected, the new connection profile windows will pop

up.

• Please enter the info of requested;

 6