Alcatel IP 30 Service Manual

Declaration of conformity for the European Community

Hereby Atlinks declares that the Alcatel IP30 product is in compliance with the essential requirements and
Directive 2014/53/EU

The CE logo printed on the products indicates the conformity with all essential requirements and applicable
directives.
You can download the declaration of conformity from the following address: www.alcatel-business.com.

Environment

This symbol means that your inoperative electronic appliance must be collected separately and not
mixed with the household waste. The European Union has implemented a specific collection and
recycling system for which producers' are responsible.

This appliance has been designed and manufactured with high quality materials and components that can be
recycled and reused.
Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to
work properly but which can become a health and environmental hazard if they are not handled or disposed of
in the proper way. Consequently, please do not throw out your inoperative appliance with the household waste.
If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it
with the vendor when buying a new appliance.
(a)- If you are a professional user, please follow your supplier’s instructions.
(b)- If the appliance is rented to you or left in your care, please contact your service provider.

Please help us protect the environment in which we live!

Notice of copyright and trademarks

Copyright © 2017 ATLINKS. All rights reserved. ATLINKS reserves the right to change the technical
specifications of its products without prior notice, so as to make technical improvements or respect new
regulations. Alcatel and Temporis are registered trademarks. Alcatel is a trademark of Nokia, used under
license by ATLINKS.

Phonebook Mute / Stop ringing

Do not disturb

Call lists

Redial list

In idle mode : increase/decrease ringer volume
In communication: increase/ decrease earpiece,
headset or handsfree volume

Intercom to one handset

Intercom to all handsets

Headset

Handsfree

Alcatel IP30

QUICK START GUIDE

Message Waiting indicator

Line selection (Next call dial out Line
selection)

Voice mail

Call Hold

Call transfer

Flash/Resume held call

Conference

Access to main menu or options

Select/Validate/Save

Back/Cancel/Reject a call

4-way navigation keys

In edition mode delete a character

Change text input mode

Speed dial keys

Model : IP30
A/W No.: 10001751 Rev.0 (EN)
Printed in China

Display icon description

Press to toggle active speed dial key
group (1 to 16 or 17 to 32)

Speed dial keys 17 to 32 currently
active

Registration on an Alcatel IP DECT base

1. Base : make a long press on key.

2. Deskset: press MENU > User settings > Registration.

3. Select This Deskset.

4. Perform the steps displayed on screen.

Language setting

• Press MENU > User settings > Language.

•

Select the desired language and press .

Making a call

Pre-dialling: enter the phone number and lift the handset.

•
Direct dialling: lift the handset and enter the phone number.

•
Handsfree: enter phone number and press or vice versa.

•

•

Headset: connect headset, enter phone number and press or viceversa.

Note: to release a call, press (or press , , or replace the handset, depending on the type of call)

Redial

1. Press > Review. Select the desired call and lift the handset or press or .

Call list

1. Press .

2. Select Missed Calls, Received calls or Dialed calls.

3. Scroll through the list using the navigation keys.

4. To dial an entry, lift the handset, or press or .

Phonebook

Access phonebook :

1. Press . Select Local or other phonebook with . Choose Review or Search.

2. Scroll with navigation keys. To dial an entry lift the handset, or press or .

Add a new entry :

1. Press . Select Local or Base Directory with . Then choose Add new.

2. Enter name and number, then ringtone and line if you wish, and press to save.

Accepting a call

With the handset : lift the handset.•
With a headset : press .•
With the handsfree : press .•

Note: to reject a call, press key. To accept a waiting call, press key.

Putting a call on hold

Press key. To retrieve the call press key.

•

Note: with more than one active call, you can use navigation key to toggle on-screen call and use the
corresponding key to hold or resume.

3-party conference

1. Once in line with 1st caller, press key, 1st caller is put on hold.

2. Select A new party or A handset party , dial phone number and press .

3. After 2nd call is established, press to set up the conference.

Note: if you already have two active calls, you can create a conference with your two counterparts by
pressing and .

Call transfer

Attended transfer :

1. During the active conversation press key, the call is put on hold.

2. Select A new party (Announced) or A handset party , dial the second telephone number

and press .

3. When the call is answered press to complete the operation.

Note: if you already have two active calls, you can transfer the call to your two counterparts by
pressing and .

Blind transfer :

1. During the active conversation press key, the call is put on hold.

2. Select A new party (blind) , enter second telephone number and . Call is automatically transferred.

Call forward

1. Press MENU > Features > Call Forwarding.

2. Select line, type of forward, status (on/off), then enter the destination number and .

Do not Disturb

1. Press key.

2. Select the line. Select status and validate with .

Voice mail

1. Press .

2. Select the line and press . A call will be sent to the line’s voice mail.

Note: when in this menu, an envelope icon will be shown at the top of the screen if there are pending
messages for the highlighted line.

Speed dial keys

Configuring Speed dial keys :

1. Press on any non-configured speed dial key or go to MENU > Speed dial.

2. Scroll through the key list with navigation keys. To edit a key press MENU.

3. Enter name, number and line to dial out, and save with .

Using Speed dial keys :

1. To dial keys 1 to 16, press on the key. Then you can also lift the handset or press .

2. To dial keys 17 to 32, first press . An will show at the top of the display. Then press
desired key.

IP DECT base web interface

1. Check phone IP address pressing MENU > Status > Network.

2. Open a web browser on your computer. Enter http:// and the IP address in the address bar and
validate. Default login and password are « user/user » for users and « admin/admin » for administrator

3. Check administrator guide for more details.