Alcatel-lucent 1850 TSS-3 RELEASE 2.1 User Manual

Alcatel-Lucent 1850 TSS-3

T R A N S P O R T S E R V I C E S W I T C H | R E L E A S E 2 . 2

The Alcatel-Lucent 1850 Transport Service Switch (TSS-3) is a carrier-class network termination unit (NTU) that provides intelligent Ethernet-service demarcation between the end customer and the service provider. It is part of the Alcatel-Lucent 1850 TSS family of Packet-Optical Transport products that offer service differentiation, transport-grade resiliency and operations, administration and maintenance (OAM) support.

The Alcatel-Lucent 1850 TSS-3 provides a mix of connectivity and network services, offering diagnostics, hardware-based service monitoring, protection, Quality of Service (QoS), rate limiting and virtual LAN (VLAN) stacking for Metro Ethernet Forum (MEF)-compliant Ethernet services. With low power consumption, the Alcatel-Lucent 1850 TSS-3 is designed to be environmentally friendly. Available in multiple standard conﬁgurations, the Alcatel-Lucent 1850 TSS-3 provides a mix of copper and optical Ethernet on the customer side, and optical Ethernet and Ethernet over Plesiochronous Digital Hierarchy (PDH) on the network side.

Features

• Fast Ethernet/Gigabit Ethernet (FE/GigE) customer and network interfaces

• Ethernet over PDH network interfaces: E1/DS1, E3/DS3

• QoS: trafﬁc classiﬁcation, rate control and prioritization

• VLAN tagging and stacking

• Wide range of network redundancy options, including per-VLAN Ethernet Linear Protection (ELP)

• Metro Ethernet Forum (MEF) certiﬁed

• Strong Ethernet OAM (Link and Service OAM) with hardware-based support for Y.1731OAM

• Compact, standalone or rack-mounted

• Standard conﬁgurations for simpliﬁed deployment

Beneﬁts

• Offers intelligent Ethernet-service demarcation

• Converts media for Ethernet over any physical uplink, including Ethernet over ﬁber and Ethernet over PDH, reusing existing E1/DS1 or E3/DS3 links for sites without ﬁber

• Quickly rolls out Carrier-Ethernet services

• Delivers rich features for QoS and service differentiation

• Manages services end-to-end

• Provides leading-edge services over Ethernet, such as Voice over IP (VoIP) and mobile backhaul

Technical Speciﬁcations

1850 TSS-3 interfaces

Fiber

• 1000BASE-SX

• 1000BASE-LX

• 1000BASE-ZX

• 1000BASE-BX bidirectional/ single-fiber working

• 100BASE-FX

• 100BASE-BX10 bidirectional/ single-fiber working

• 1000BASE-BX20 & BX40 bidirectional SFP

• Coarse wavelength division multiplexing (CWDM) SFP: eight colors; SH, LH

• Small Form-Factor Pluggable (SFP)-based MSA INF8074/ SFF 8472-compliance

• Digital diagnostic-monitoring support

• Connector type: line circuit (LC)

Copper

Ethern et

• 10/100/1000BASE-T: twisted pair cables up to 100 m

• 10/100/1000BASE-T: twisted pair cables up to 100 m; SFP-based

• Connector type: RJ-45

PDH

• DS1 1.544 Mb/s: D-type connector, balanced 100 ohm

• E1 2.048 Mb/s: D-t ype connector, balanced 120 ohm inskin, unbalanced 75 ohm through external balun

• E3 34.368 Mb/s: BNC connector

• DS3 44.736 Mb/s: BNC connector

Ethernet functionality

• IEEE 802.3 Ethernet interfaces, 10/100/1000 Mb/s

• Media Access Control (MAC) bridging, IEEE 802.1D

• 16,000-MAC table

• IEEE 802.1Q virtual LAN (VLAN) bridging

• IEEE 802.1ad provider bridging with service multiplexing

• MAC forwarding table management and option to disable MAC learning globally or per EVC

• MEF Ethernet line (E-line), E-LAN, E-tree services

• Port authentication, IEEE 802.1X

• Jumbo frame support: maximum frame size 9600 bytes

• Multiple flow classification options: port, IEEE 802.1Q/802.1p bits,

802.1ad PCP, IP ToS/ DSCP, VLAN ID, MAC SA/DA

• Ingress rate limiting per flow, allows BW profile per UNI, EVC, CoS compliant with MEF 10.1 and MEF 13

• Service level agreement (SLA) management/traffic profiles

¬ Best-effort ¬ Bandwidth-guaranteed ¬ Regulated: minimum

bandwidth plus burst

• Four classes of service

• Class-based queuing

• For warding criteria: port, port plus MAC, port plus VLAN

• Weighted random early detection (WRED)-like congestion control

• Egress shaping per port

• Strict priority and shaped deficit weighted round robin (SDWRR) scheduling

• Pause flow control

• Port-based statistics/RMON RFC 2819

• Ethernet fault propagation: link pass-through

• Link aggregation, IEEE 802.3ad (with LACP)

• Flexible port assignment ¬ Customer interface (CIF) ¬ Network interface (NIF)

• IEEE 802.3ah OAM; Ethernet in the First Mile (EFM)

• IEEE 802.1ag (CFM) Ethernet service OAM

• ITU-T Y.1731 Ethernet service OAM (hardware based)

• Ethernet service performance counters per EVC (Y.1731-related)

• L2 Access Control Lists (ACL)

• Ethernet port loopbacks: internal and external

• MEF 9 and MEF 14 certified

• MEF20 UNI Type 2 compliance (Link OAM, S-OAM, protection, L2CP)

• EVC Loopback (with MAC address swapping options)

PDH functionality

• ITU-T G.7041 GFP-F Encapsulation

• ITU-T G.8040 GFP mapping into PDH

• ITU-T G.7043 PDH virtual concatenation (VCAT)

• ITU-T G.7042 ink capacity adjustment scheme (LCAS) protection

• Multiple VCG

• PDH OAM

Network redundancy

Ethern et

• ITU-T G.8031 Ethernet Linear Protection Switching, 1:1 bidirectional with APS

• Dual homing on network side

• Rapid Spanning Tree Protocol (RSTP): IEEE 802.1D-2004

• Link aggregation

PDH

• 1 + 1 port protection

Management

• Alcatel-Lucent 1350 Optical Management System (OMS)

• Alcatel-Lucent 1340 Integrated Network Controller (INC)

• In-band management VL AN

• Command-line interface (CLI)

• HTTP-based craft terminal

• Simple Network Management Protocol (SNMP) v2/v3

• Secure Shell (SSH), Secure Sockets Layer (SSL) for HTTP

• Eight MDIs and four MDOs housekeeping alarms

• RADIUS Authentication

Physical specifications

Dime nsions

• Height: 44 mm (1.7 in.)

• Width: 407 mm (16.0 in.)

• Depth: 210 mm (8.3 in.)

• One Rack Unit (RU)

• 2.6 kg (5.7 lb)

• Standard ANSI or ETSI frames

Power

• 90 -V AC to 264-V AC, 50/60 Hz

• 36-V DC to 75-V DC, redundant power feeds

• Power consumption: 30 W maximum

Enviro nment al

• Operating temperature:

-5°C to +45°C (23°F to 113°F)

• Humidity: up to 95%, non-condensing

• Seismic environment: Zone 4

Regulatory compliance

• EMC/EMI, EN 300 386 Class B

• UL/cUL 60950 -1

• FCC Part 15B

• NEBS Level 3

• EN 300 019-2-3 class 3.2

• ETS300-019-2-1 Class 1.2 for storage

• ETS300-019-2-2 Class 2.3 for transportation

• IEEE

• EU RoHS

• China RoHS

www.alcatel-lucent.com Alcat el, Lu cent, Alcatel-L ucent and the A lcatel-Lu cent logo

are tradem arks of Alcatel- Lucent . All other trad emarks ar e the proper ty of their respec tive ow ners. The info rmation prese nted is subject to change without notice. Alcatel-Lucent assumes no responsibilit y for i naccura cies con tained h erein. Copy right © 2 010 Alcat el-Luc ent. All rig hts res erved. CPG468 8100649 (07)