Alcatel-lucent 1830 DATASHEET
Alcatel-Lucent 1830 Photonic Service Switch-1
Alcatel-Lucent 1830 Photonic Service Switch-4 | R E L E A S E 1 . X
The Alcatel-Lucent 1830 Photonic Service Switch (PSS)-1 and Alcatel-Lucent 1830 PSS-4 represent a new
type of photonic-switching access platform for metro wavelength division multiplexing (WDM). Implementing
Zero-Touch Photonics, they transform traditional WDM into a cost-effective, low-footprint and fully flexible
transport layer with complete visibility and control of individual wavelengths. This transformation simplifies
broadband service delivery, speeds time-to-revenue generation and facilitates bandwidth expansion in optical
transport network (OTN)-based metro access networks.
The Alcatel-Lucent 1830 PSS-1 is a compact, one rack unit (RU) customer premises equipment (CPE), hardened
for outdoor deployment and available in different fixed configurations. The Alcatel-Lucent 1830 PSS-4 has
a two RU chassis with four slots available for service cards, the same cards supported by the Alcatel-Lucent
1830 PSS-16 and the Alcatel-Lucent PSS-32 (see Figure 1).
Applications
The Alcatel-Lucent 1830 PSS-1/PSS-4
supports the transport and delivery
of multiple services in a variety of
environments:
• Transport networks for service
providers to aggregate SONET/SDH,
IP/MPLS, Mobile, Broadband (xDSL,
PON) traffic
• Metro network extension to the
customer premises through costeffective CWDM/DWDM technology
up to 10G
• Campus networks for data center
protection or data sharing for
organizations such as universities,
hospitals, banks and airports
• Multi-campus networks for cooperation
among public and private companies
and optimization of leased dark fiber
• Metropolitan or national research
networks that can be combined
with the Alcatel-Lucent 1830 PSS-16/
PSS-32 to extend these networks to
regional distances
Key benefits
• Extension of the Alcatel-Lucent
1830 PSS product family to the
customer premises
• Cost-effective, small footprint and
low power consumption
• Deployment flexibility: compact and
temperature-hardened for outdoor
installation
• A variety of client interfaces with
high port density to maximize wavelength efficiency
• Support for cost-effective multiplexing of any bit-rate services and
transport over optical translator unit
(OTU)-1/OTU-2
• Optical Data Unit (ODU)k switching
capability
• Terminal, Fixed Optical Add Drop
Multiplexer (FOADM) or In-Line
Amplifier (ILA) applications
• Strong forward error correction
(FEC) technology based upon OTN
to improve system performance
and optical link budgets
• Simplified network design,
implementation and maintenance
with auto power management and
Wavelength Tracker™
Figure 1. 183 0 PSS-1/PSS-4 for metro WDM
1830
PSS-32
DWDM
1830
PSS-32
1830
PSS-4
regional/core
PSS-16
C/DWDM
metro access
1830
PSS-1
1830
1830
PSS-4
1830
PSS-16
1830
PSS-1
Common features
Optical-layer intelligence
• Ring, hub and point-to-point network
topologies support
• Single-fiber bidirectional line transmission (CWDM)
• Optical-layer path tracing and power
monitoring on a per-uniquewavelength service basis
• View of all wavelengths present
on a selected fiber pair
• Integrated fault isolation and
sectionalization at the optical layer
• Automated optical layer with
dynamic power equalization
• Integrated fault correlation
Scalability
• Pluggable client interfaces enable
turning up interfaces based on
traffic demand
• In-service network scalability
without service disruption
• Network planning independent
of traffic forecast
Flexible protection options
• Diverse route protection
• E-SNCP within 50 ms
Integrated SLA support
and monitoring
• Proactive service management
for wavelength services
• G.709-compliant
• Flexible service-level alarms
Carrier-class availability
• 99.999 percent availability
• CE, CSA, NEBS Level 3 and VCCI
compliant
• Redundant power supply
• Temperature-hardened operation
Storage area networks (SAN)
• Brocade certification
Network management
• Full-featured Operations,
Administration, Maintenance &
Provisioning (OAM&P) functionality
• Alcatel-Lucent 1350 Optical
Management System (OMS)
• Alcatel-Lucent 1340 Integrated
Network Controller (INC)
• Alcatel-Lucent 1354 Photonic
Manager (RM-PhM)
• Interfaces: Web graphical user
interface (GUI) and command-line
interface (CLI)
• Transaction Language 1 (TL1)
• Simple Network Management
Protocol (SNMP)
• Ethernet port for local access
• Integrated remote management
through General Communication
Channel (GCC) and Optical
Supervisory Channel (OSC)
• Selectable rates for OSC: 100 Mb/s
or 155 Mb/s
• Auto node discovery
• Alcatel-Lucent Advanced Engineering
Planning Tool simplifies network
design and system installation
1830 PSS-1 MSAH
• Client ports: 21 x E1 (75 Ohm)
plus 4 independent anyrate ports
¬ SONET: OC-3, OC-12 and OC-48
¬ SDH: STM-1, STM-4 and STM-16
¬ Fast Ethernet (FE) and Gigabit
Ethernet (GE)
¬ 1G Fibre Channel (FC), 2G FC
and 4G FC
¬ 1G Fiber Connectivity (FICON)
and 2G FICON
¬ High-definition- serial digital
interface (HD-SDI)
¬ Standard definition (SD)-SDI
• Line ports: 2 x OTU-1/STM-1
• Standard SDH/SONET mapping
¬ E1, VC12, TUG2 , TUG3, VC4,
AU4
¬ STM-16 and OC-48 to ODU1
¬ Standard GE to ODU0
¬ Proprietary sub-ODU1 mapping
for client
• Support for provisional flexible
multiplexing (1:2, 1:3 and 1:4)
and transparent transport of any
bit-rate services over OTU-1
• Up to 8 CWDM wavelengths
• Data communication network
(DCN) access through LAN port
• Synchronous Ethernet (transparent)
1830 PSS-1 models
1830 PSS-1 AHP
• High-power, high-gain C-band
optical amplifier with 20-dBm
output and variable gain setting
from 13 to 33 dB
• Auto power mode: amplifier gain
is adjusted automatically and
dynamically
• Manual power mode
• Two stacked units serve as an ILA
• Stacked units can be managed
by a single IP address
• OSC for remote management
and auto node discovery
• Wavelength Tracker monitors
and traces each wavelength
1830 PSS-1 GBEH
• Client ports: 12 x GE (SFP)
• Line ports: 2 x 10 GE (XFP)
• Integrated Layer 2 switching
capability
• Supports full-rate and sub-rate
Ethernet Virtual Private Line
(EVPL) service with E-SNCP
protection
• E-SNCP protection for intraboard
traffic
• Committed information rate/
Equipment Identity Register
(CIR/EIR) Quality of Service (QoS)
control based on MEF 6.1
• Up to 8 CWDM wavelengths
• Support for sub-rate CIR Ethernet
1830 PSS-1 MD4H
• Dual muxponder boards, each
supporting 4 client ports and
2 line ports
• Client ports: 4 independent
anyrate ports
¬ OC-3, OC-12 and OC-48
¬ STM-1, STM-4 and STM-16
¬ FE, GE
¬ 1G FC, 2G FC and 4G FC
¬ 1G FICON and 2G FICON
¬ HD-SDI
¬ SD-SDI
• Line ports: 2 x OTU-1
• Mapping:
¬ Standard STM-16 and OC-48
to ODU1
¬ Standard GE to ODU0
¬ Proprietary sub-ODU1 mapping
for client
• Supports provisional flexible
multiplexing (1:2, 1:3 and 1:4)
and transparent transport of any
bit-rate services over OTU-1
• Up to 8 CWDM wavelengths
• DCN access through LAN port
• Synchronous Ethernet (transparent)
Alcatel- Lucent 1830 PSS-1/1830 PSS- 4 | Dat a Sheet 2
Loading...