2
Index
Important note 3
Introduction 3
Accessories included 4
Safety Precautions 4
Front view 5
Rear view 5
Installation of the radio 5
Power supply 6
Antenna connection 7
Operation 8
Switching on and adjusting volume 9
Country switch setting 9
Selecting the operating channel 10
Adjusting squelch (muting) 10
AM / FM mode switch 10
Special interest channels 11
Direct channel access to CH 9 / 19 11
Scan mode 11
Transmitting and correct use of microphone 12
External sockets 12
External loudspeaker 12
Microphone socket 12
Service and Warranty informations 13
Legal Information 14
Albrecht Radio Passport 14
Declaration of Conformity 15
Technical Details 16
Service contacts 16
3
Important Note
Your Albrecht AE 4090 corresponds to the latest European CB standards. As a
unique feature, it has a software country switching which allows selecting the
operation mode according to the country, where You intend to use the radio. Please
make sure that You use only the country switching which is allowed in Your country
and according to Your CB licence! You may risk a penalty if authority members
will find that You are operating in not allowed modes!
40 FM 40 channels FM / 4 Watt (former “CEPT” settings with 40
Channels FM according to EN 300 135-2). This mode can be
used in nearly all European countries (some countries still
request an individual licence, even for 40 FM mode! See our
latest issue of the “Radio Passport”).
After installation or reconnecting to a power supply, Your radio will
always start in this factory preselected 40 FM mode.
80/12 80 channels FM / 4 Watt, 12 channels AM / 1 Watt for Germany
only. You need a licence to operate the radio in this mode, and
in certain border regions transmitting on channels 41 to 80 in FM
is not allowed.
40/40 40 channels FM / 4 Watt, 40 channels AM / 1 Watt. Latest
European Standard EN 300 433-2, not yet applied in all
countries. In Belgium, France, Germany, Italy, Portugal, Spain
and Switzerland You need a licence to operate the radio, while it
is already free of charges and licence in Finland and
Netherlands.
Introduction
Your new Albrecht CB Radio AE 4090, developed and manufactured in accordance
with the latest CB regulations, offers you:
• 40 channels FM / 4 watt or
• 80 channels FM / 4 watt / 12 channels AM / 1 Watt or
• 40 channels FM / 4 Watts / 40 channels AM / 1 Watt
• Channel selection UP/ Down buttons on the radio set and on the
microphone
• Channel scan button at microphone
• Direct channel switching to CH 9 / 19 from microphone
• LED channel number display
4
• 8-pin microphone socket, suitable also for amplifier microphones,
selective calling systems or Packet Radio modems/TNC’s
• Socket for external loudspeaker
Please read this operating manual through carefully. This will enable you to make
use of all the functions your new CB Radio has to offer as soon as possible.
Accessories included
Your AE 4090 comes operational with the following accessories:
• mobile mount
• 2 knurled screws for the mobile mount
• 2 rubber washers for the mobile mount
• fixed connected DC power cable with looped-in fuse
• spare fuse
• Electret hand-held microphone with pre-amplifier and UP/DOWN, PTT,
CH 9/19 and SCAN buttons
• microphone hanger
• various screws to fasten the radio and microphone fixing devices
• User manual with circuit diagram and Radio Passport
Safety Precautions
People with pacemakers are recommended as a precaution to consult their doctor
before operating the CB radio. Not all types of pacemakers are sufficiently protected
from radiation from a nearby transmitter, so do not assume it is safe to start
operation without checking! Please remember that you are in the immediate vicinity
of a transmitting aerial, particularly when used as a mobile. If your doctor, or the
manufacturer of the pacemaker, has recommended keeping a certain safe distance
from the aerial, then please follow their instructions!
Do not transmit without connecting the aerial and never touch the aerial during
transmission!
Please also take road safety into account! CB Radio (even when only receiving,
particularly when volume is turned up) can divert your attention from the road! Road
safety is of course to be given priority! Therefore only use your ALBRECHT AE 4090
when the traffic situation enables it to be used safely.
5
Front view
Receive Volume
On / Off
Squelch
Transmit LED
(not all versions)
LED-Channel Display
Double Function
Channel / Country switch
Rear view
External speaker
Brand Plate with
country switching
Antenna socket
50 Ohms
13.2 V
Installation of the radio
You can either operate your ALBRECHT AE 4090 in the car or at home as a base
station. For installation as a mobile station in the car, a mobile mount device is
enclosed. Mount the set in such a way that it is not exposed to direct sunlight if
possible, as this would lead to an increase in the temperature and can decrease the
(set’s) working life. The set should also not be installed near a heater. Mount the set
in such a way that it is exposed to as little vibration as possible.
The mobile fixing device should be attached to the dashboard, the tunnel slot or to
any other suitable place using the enclosed tapping screws. Do not install the set in
a place where it could cause injuries in the case of an accident (be careful to ensure