AIWA JAX-S5 Operating Instructions
Mini Hi-Fi Component System
JAX-S5
4-245-777-51
030407AMI-DS-SO
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
To prevent fire, do not cover the ventilation of the apparatus
with newspapers, table-cloths, curtains, etc. And don't
place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled
with liquids, such as vases, on the apparatus.
En
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
“CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.”
This symbol is intended to alert the user to
the presence of uninsulated "dangerous
voltage" within the product's enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION
The use of optical instruments with this product will
increase eye hazard.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS
POLARIZED AC PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
PRECAUTIONS
On operating voltage
Before operating the system, check that the operating voltage
of your system is identical with the voltage of your local power
supply.
On safety
•The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet, even if
the unit itself has been turned off.
•Unplug the system from the wall outlet (mains) if it is not to
be used for an extended period of time. To disconnect the
cord (mains lead), pull it out by the plug. Never pull the
cord itself.
•Should any solid object or liquid fall into the component,
unplug the stereo system and have the component checked
by qualified personnel before operating it any further.
•The AC power cord must be changed only at a qualified
service shop.
On placement
•Place the unit in a location with adequate ventilation to
prevent heat build-up the unit.
•Do not place the unit in an inclined position.
•Do not place the unit in locations where it is;
- Extremely hot or cold
- Dusty or dirty
-Very humid
-Vibrating
- Subject to direct sunlight.
2
On heat buildup
•Although the unit heats up during operation, this is not
malfunction.
•Place the unit in a location with adequate ventilation to
prevent heat build-up in the unit.
If you continuously use this unit at a large volume, the cabinet
temperature of the top, side and bottom rises considerable.
To avoid burning yourself, do not touch the cabinet.
On operation
•If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture may
condense on the lens inside the CD player. Should this occur,
the system will not operate properly. Remove the CD and
leave the system turned on for about an hour until the
moisture evaporates.
•When you move the system, take out any discs.
Notes on discs
•Discs recorded on CD-R/RW drives may not be played back
because of scratches, dirt., recording condition or the drive's
characteristics.
•CD-R/RW discs which are not finalized at the end of
recording cannot be played back.
•Do not attach adhesive label, etc. to either side of a CD-R/
RW disc, as doing so may cause malfunction.
•Do not load an unrecorded CD-R/RW disc. The disc may be
damaged.
•Discs with non-standard shapes (e.g., heart, square, star)
cannot be played on this unit. Attempting to do so may
damage the unit. Do not use such discs.
•DVD, SACD, and VCD cannot be played on this unit.
Music discs encoded with copyright protection
technologies
This product is designed to playback discs that conform to
the Compact Disc (CD) standard. Recently, various music
discs encoded with copyright protection technologies are
marketed by some record companies. Please be aware that
among those discs, there are some that do not conform to the
CD standard and may not be playable by this product.
If you have any questions or problems concerning your stereo
system, please consult your nearest Aiwa dealer.
TABLE OF CONTENTS
PRECAUTIONS .................................... 2
PREPARATIONS ................................... 4
PARTS AND CONTROLS ......................... 5
ADJUSTMENTS BEFORE OPERATIONS ........ 8
CD OPERATIONS ................................ 10
MP3-CD OPERATIONS ......................... 12
TUNER OPERATIONS ........................... 14
TAPE OPERATIONS ............................. 16
SOUND ADJUSTMENTS ........................ 19
TIMER OPERATIONS ........................... 20
REFERENCE ..................................... 22
En
3
PREPARATIONS
Connection
Plug in the AC power cord to the AC power outlet after all other
connections are made.
1
Connect the front speakers.
Connect the right front speaker (marked with "R") to the
SPEAKER R terminals and place it on the right side of the
unit. Connect the left (marked with "L") to the SPEAKER L
terminals and place it on the left side. The speaker cords
with the black stripes go to the 9 terminals.
2
Connect the supplied antennas.
Connect the FM antenna to the
the AM antenna to the AM LOOP terminals.
AM antenna
FM 75 Ω terminal and
Remote
Detach the battery compartment lid at the rear of the remote
and insert two R6 (size AA) batteries with correct polarity.
R6(AA)
En
•Replace the batteries with new ones when the operational
FM antenna
3
Connect the AC power cord to a wall outlet.
When the AC power cord is connected to a wall outlet for
the first time, DEMO appears in the display.
To deactivate the DEMO, press c (c/don the
remote).
•Do not short-circuit the 0 and 9 speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
distance between the remote and main unit becomes shorter.
•Remove the batteries if the unit is not going to be used for
an extended period of time.
•The remote may not operate if it is used under intense
sunlight, etc., or if its line of sight is obstructed.
4
PARTS AND CONTROLS
Main unit: rear
Refer to the pages indicated in parentheses for details.
1 AM LOOP,
Plug in the supplied AM and FM antennas here.
2 VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".
3 # SPEAKER terminals (4)
Connect the speaker cord of the supplied front speakers
here.
4 AC power cord (4)
FM 75 Ω terminals (4)
En
5
Main unit: front
Refer to the pages indicated in parentheses for details.
En
1 DISC CHANGE (10)
Rotates the CD trays.
2 POWER 6STANDBY/ON (8)
Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.
3 MODE (8-12, 19)
Selects various modes (ECO and Repeat/Shuffle/
Programed playback, etc.) when used in combination with
ENTER and MULTI JOG.
4 ENTER (8-12, 14, 19-21)
Fixes the modes and the time (ECO, Repeat/Shuffle/
Programed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
6
5 MULTI JOG (8-12, 14, 17-21)
When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.
6 PHONES jack
Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.
7 SYNC DUB (17)
Starts dubbing a whole tape.
wREC/REC MUTING (16, 17)
Starts recording.
8 DISC DIRECT PLAY 1-3 (10)
Selects a disc.
9 zOPEN/CLOSE (10)
Opens or closes the disc compartment.
0 TAPE A/B (16)
Selects Tape function, and deck A or B.
TUNER/BAND (14)
Selects Tuner function and the radio band.
VIDEO/AUX (5)
Selects the function of external equipment connected to
VIDEO/AUX jacks.
CD (10)
Selects CD function.
! Remote sensor
Receives a signal from the remote.
@ VOLUME (8)
Adjusts the volume.
# TREBLE (19)
Enhances high frequency sound.
$ cPLAY/PRESET (8, 10-12, 14, 16)
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
sSTOP/CLEAR (10, 11, 14, 16-18)
CD and Tape: stops playback.
Tuner: clears a station preset.
fTUNING DOWN, g TUNING UP
(10, 14, 16)
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
aPAUSE/SET (10, 14, 16)
CD and Tape: pauses playback.
Tuner: stores the received station in to preset.
% BASS (19)
Emphasizes low frequency sound.
^ i-Bass (19)
Produces rich and clear low frequency sound.
& DISPLAY (9, 10)
Displays the time and the remaining time for CD.
ALBUM k, i (12)
Selects a previous album or a succeeding album with
MP3-CDs.
Remote control
Refer to the pages indicated in parentheses for details.
Buttons with the same or similar names with the main unit
basically have the same function.
1 POWER (8)
2 1-0/10, +10 (10-12, 14)
CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.
The numbered buttons take on these functions below when pressed
with SHIFT held down
EDIT (17, 18)
Enters AI Edit Recording or Programed Edit Recording
mode when pressed in stop mode.
BAND (14)
Selects Tuner function and the radio band.
TAPE A/B (16)
:
SPECTRUM (8)
Changes the spectrum analyzer display.
TUNER MODE (15)
Switches between stereo or monaural FM reception.
3 r, t (9-11, 14, 17-21)
CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.
4 ALBUM M, N (12)
Selects a previous album or a succeeding album.
5 PLAY MODE (11)
Selects Shuffle or Programed playback in CD function.
REPEAT (10)
Enters CD repeat playback mode.
ENTER (8-12, 14, 19-21)
6 CLOCK/TIMER/SET (9, 20, 21)
Enters timer setting mode.
CLOCK/TIMER/SELECT (20, 21)
Selects timer playback, timer recording or timer off.
7 DISPLAY (9, 10)
8 SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
9 FUNCTION
Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).
0 DISC SKIP (10)
Select a disc.
! c/d (8, 10-12, 16)
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
s (10, 11, 16-18)
CD and Tape: stops playback.
f,g (10, 14, 16)
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a (10, 16)
CD and Tape: pauses playback.
@ SLEEP (20)
Switches the sleep-timer on/off and selects the duration.
# VOLUME (+, -) (8)
Adjusts the volume.
$ SOUND (19)
Selects BASS or TREBLE setting mode
CLEAR (11, 14)
Clears a track of the CD programed playback and a Radio
preset station.
Note
The button not explained above (KARAOKE) does not
operate for this unit.
En
7
ADJUSTMENTS BEFORE OPERATIONS
POWER
STANDBY / ON
MODE
ENTER
MULTI JOG
En
Power
Tur ning the unit on
Press POWER 6STANDBY/ON (POWER on the remote).
Pressing TAPE A/B, TUNER/BAND, VIDEO/AUX or CD also
turns the unit on (Direct Play Function.) When a disc or tape
is inserted, the playback will start automatically.
Tur ning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
POWER
SPECTRUM
VOLUME
TAPE A/B,
TUNER/BAND,
VIDEO/AUX,
CD
CLOCK/
TIMER/SET
DISPLAY
SHIFT
ENTER
VOLUME
+,–
Volume
Turn VOLUME (Press VOLUME +, - on the remote).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby:
If the unit is turned off with the volume set to 17 or more, it is
automatically set to 16 the next time the unit is turned on.
DEMO
You can enjoy DEMO in the display when the unit is turned off.
To activate or deactivate the DEMO
Press c (c/don the remote)
off.
when the unit is turned
Spectrum analyzer display
You can change the spectrum analyzer display.
1
Press MODE repeatedly until "SPECTRUM?"
appears in the display when the unit is turned on
and then press ENTER.
2
Turn MULTI JOG to select one of the three
spectrum analyzer displays (PATTERN 1, 2 and 3).
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
On the remote, press SHIFT+SPECTRUM repeatedly.
8
Loading...