No part of this publication may be reproduced in any form or by any means, whether
electronic, mechanical, photocopying, or recording without the written consent of OvisLink
Corp.
OvisLink Corp. has made the best effort to ensure the accuracy of the information in this
user’s guide. However, we are not liable for the inaccuracies or errors in this guide.
Please use with caution. All information is subject to change without notice
This product contains some codes from GPL. In compliance with GPL agreement, AirLive
will publish the GPL codes on our website. Please go to www.airlive.com and go to the
"Support->GPL" menu to download source code.
All Trademarks are properties of their respective holders.
i AirLive DM-720 User’s Manual
Copyright and Disclaimer
FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the A
user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. For
product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
A. Frame-rate and Bitrate Table...............................................................47
B. Storage Requirement Table .................................................................52
AirLive DM-720 User’s Manual iv
1. Overview
1. Overview
1
This user’s guide explains how to operate this camera from a computer. A user should read
this manual completely and carefully before you operate the device.
1.1 Introduction
The AirLive DM-720 is a high-end megapixel network camera designed for professional
indoor surveillance and security applications. Megapixel (MP) IP cameras are now
available that offer a huge jump in image quality compared to conventional surveillance
cameras. This new model complements an architecture and software that are based on
variations for professional indoor surveillance and security applications. The possibility of
viewing video from AirLive IP Cameras over the Internet is not the only one of benefits.
AirLive DM-720 is designed to offer high-performance and is equipped with PoE port,
ensuring to power IP camera and providing network activity via one RJ45 network cable.
This advance provides an easier installation, the lower cable costs and allows placement of
AirLive POE cameras in locations with power limitation. The built-in IR LED and ICR make
AirLive DM-720 provide a clear and smooth video image even in the night time or in a low
illumination environment. The AirLive DM-720 is an ideal IP camera for the applications
such as hallways or stairwell.
1.2 Features
This manual will illustrate the steps of how to setup and operate this IP camera, so you’ll
also soon be enjoying the benefits of these product features:
UPnP for fast and easy installation
Support 18pcs high illumination LED
Megapixel progressive scan CMOS
Multiple H.264, Motion JPEG and MPEG-4 video streams
Mobile phone live viewing
64 channel surveillance software
IR Night Vision Dome Camera suits various of application
1
AirLive DM-720User’Manual
1.3 Product Specification
Model AIR LIVE DM-720
Camera Type Indoor Dome Type
Image Sensor 1/4" Mega Pixel Color CMOS Sensor
Sensor Resolution 1280 X 800
1. Overview
Camera
Video
Lens Type
Board Lens
4mm, F1.8
Night Vision Yes
Max IR Distance 15M
Minimum Illumination 0 Lux with IR LEDs on
Mechanical IR-Cut
Built-In Removable IR Cut Filter
Filter
Auto Iris None
48°27' (H)
Viewing Angle
37°17' (V)
58°42' (D)
Pan/Tile Control E-PTZ
Analog Video Out Yes
H.264
Video Compression
MPEG4
MJPEG
Video Profile 10
1280 X 720 @ 30 fps
Resolution and
Frame Rate
640 x 480 @ 30 fps
320 X 240 @ 30 fps
160 X 120 @ 30fps
Multi-profile streaming
Streaming over UDP, TCP, or HTTP
M-JPEG streaming over HTTP
Streaming
(for non IE browser)
3GPP mobile view
Configurable frame rate and bandwidth
Support both CBR and VBR
Region of Interest None
Image Processing
AirLive DM-720 User’s Manual 2
AE, AWB
Noise reduction
Color, brightness, sharpness, contrast, Hue
Mirror/Flip
Privacy Masks
Text, time and date OSD
Digital Zoom 10x
1. Overview
Audio
Network
Audio Encoder
RTSP:none
3GPP:none
Audio Streaming None
Audio Input/Output None
One RJ45 Port; IEEE 802.3u Compliant
Ethernet
10/100 Mbps Fast Ethernet with
Auto-MDIX
PoE IEEE802.3af
TCP/IP, UDP, ICMP, DHCP, NTP, DNS,
DDNS, SMTP, FTP, HTTP, HTTPs, Samba,
Supported Protocols
PPPoE, UPnP, Bonjour, RTP, RTSP and
RTCP
Password protection
Security
IP filter
HTTPS
Users Up to 20 simultaneous users
LED and Button
General
Power LED Blue Color
Link/Act. LED Blue Color
Reboot and Factory Default
Reset Button
(Push and Hold Over 5 Sec)
Network ProcessorDSP Base
System ROM 8 MByte NAND Flash
System RAM 128Mbyte DDR SDRAM
Power Supply DC12V
Power Consumption8 Watts Max.
RJ-45 10BaseT/100BaseTX
12V DC power jack
Connector
Composite video out
Reset button
3
AirLive DM-720User’Manual
1. Overview
Operation: Temp: 0℃ ~ 50℃
System Integration
Environment
Humidity: 20% ~ 85% non-condensing
Storage: Temp: -15℃ ~ 60℃
Humidity: 0% ~ 90% non-condensing
SD card slot Micro SD
Dimension HxWxD:145x145x100 (φ)mm
CamPro Express 64,CamPro Professional
Software
Search & Installation-IP Wizard II
Motion detection
Event Triggers
External input via DI interface
Motion Detection 3
FTP or NAS file upload
E-mail alter
Event handler
HTTP, and TCP notification
DO (digital output) alarm
UPNP Yes
Application
Programming
Interface
Open API for software integration
ONVIF
SDK
Viewing System
Video Buffer Pre- and post- alarm buffering
Intelligent video motion detection and
Alarm Triggers
external input
File upload via FTP or email
Notification via email, HTTP
Alarm Events
External output activation
Save to SD card
Network storage
Continuous recordingYes
OS Windows® XP, Vista, 7
Browser IE 6.0 or later, Firefox 2.0 or later, Safari
Cell Phone With 3GPP player
Video Player VLC, Quick Time, Real Player, Core Player
AirLive DM-720 User’s Manual 4
1. Overview
1.4 System Requirement
For normal operation and viewing of the network camera, it’s recommended that your
system meets these minimum requirements for proper operation:
Windows 2000, Windows 2003, Windows XP, Windows Vista,
Windows 7, and Mac OS X Leopard
Web Browser Internet Explore 6 or later
Note: Please keep updating the latest Windows software and service package. (Ex: Net
Framework, Windows Media Player, Enhance ActiveX Security)
5
AirLive DM-720User’Manual
2. Package Contents and Installation
2. Package Contents and
2
Installation
2.1 Package Content
A user can find the following items in the package as below:
1. AirLive DM-720 is the main element of the product.
2. Bundle CD include Setup Wizard II, CamPro Express64, Video Tutorial, Quick Start
Guide, User Manual and other tools
3. Power Adapter dedicates 12V DC electric power output to Network Camera.
4. Quick Start Guide provides important information and instructions for installing this
device.
5. Accessory Package
2.2 Hardware Overview
Inside View
AirLive DM-720 User’s Manual 6
LED Indicator
2. Package Contents and Installation
Steady orange means SD card is ready SD Card Orange
Flashes orange while accessing SD card.
Power
Red Steady red for booting up process; Steady red 30
Blue Steady blue for booting up competition.
Purple Flash purple during firmware upgrading.
Unlit When you press reset button.
Back Side View
Seconds when WPS configure failed.
Network
Green Steady green for Network link.
Orange Flash orange while Network activity.
Reboot Press the Reset Button to reboot the camera. Reset
Reset to
Factory Default
Hold the Reset Button for 10 seconds to restore the
camera to default
7
AirLive DM-720User’Manual
2. Package Contents and Installation
2.3 Hardware Installation
Follow these steps to install the AirLive DM-720 on your Ethernet:
A. Wall mounting and Ceiling mounting
1. Attach the alignment sticker to the wall/ceiling and drill three pilot holes into it.
2. Hammer the supplied plastic anchors into the holes.
3. Align the three holes on the base of camera with the three plastic anchors on the wall or
ceiling; insert the supplied screws to the corresponding hole and screw them.
B. Connect Cables
1. Power over Ethernet (PoE)
Using a standard RJ-45 network cable; connect the IP Camera to a PoE-enabled Hub /
Switch / Router.
AirLive DM-720 User’s Manual 8
2. Package Contents and Installation
2. Without Power over Ethernet (PoE) connection
Connect the power adaptor to the IP Camera. Using a standard RJ-45 network cable,
connect the IP Camera to a normal Hub / Switch / Router.
C. Adjust the view angle- 2 axis Mechanism Design
1. Turn the lens module right and left to your desired pan position.
2. Turn the lens module up and down to your desire tile position.
3. Turn the lens module to adjust the image orientation to satisfied angle.
9
AirLive DM-720User’Manual
2. Package Contents and Installation
D. Completion
1. Clean the dome bubble to remove the dust and finger print.
2. Rotate the black shield on the dome bubble to match the camera’s position.
3. Fasten the dome cover to the base clockwise and make secure two parts reaching the
final position by checking two small dots on the side of housing.
4. Slightly adjust dome bubble to final position if needed and double check if the camera is
properly focused.
5. The installation is complete now.
AirLive DM-720 User’s Manual 10
2. Package Contents and Installation
2.4 Connect to IP Camera
1. Insert the bundle CD into your PC/Laptop.
2. Auto Run Screen then shows up; click “Install Software Æ Camera IP Finder Utility” to
install the configuration tool software.
11
AirLive DM-720User’Manual
2. Package Contents and Installation
3. After completing installation, run the configuration tool software.
4. The Software scans the network and finds the IP Camera and then lists them in the
dialog box.
5. If the Camera’s IP address is in the same IP segment as your LAN, select the founded IP
Camera and double click on the item. Then, the default browser will show up and connect
to the IP camera’s Web automatically.
AirLive DM-720 User’s Manual 12
3. Using IP Camera via Web Browser
3. Using IP Camera via
3
3.1 Windows Web Browser
1. Open your web browser, and enter the IP address or host name of the IP camera in the
Location / Address field of your browser.
Note: If you only want to view the video without accessing Setting screen, enter
“http://<IP>/index2.htm” as your web URL.
Web Browser
2. Use the default account “admin” and default password “airlive”.
Note: The default user name “admin” and the password “airlive” are set at the factory for
the administrator. You can change them in the Account Menu. (Please check
“Configuration → Basic Setup → Account”)
3. The monitor image will be displayed in your browser. In the left side of main configuration
are “Configuration” and “Client Setting”. For more details, you can check the following
chapters.
13
AirLive DM-720User’Manual
3. Using IP Camera via Web Browser
3.2 Mac Web Browser
1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address
field of your browser.
Note: If you only want to view the video without Setting screen “http://<IP>/index2.htm”
as your web URL.
AirLive DM-720 User’s Manual 14
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.