Airlive CFD-200-FNN-1.5M DATASHEET
CFD-200-FNN-1.5M
1.5 Meter Antenna Cable
1.5 meter cable length
Male RP N-Type to Male N-Type converting
Recommended for WH-9000MESH, WH-9100MESH
Male RP N-Type to Male N-Type Converter Cable
CFD-200-FNN-1.5M is the adapter cable from your AP/Mesh to the outdoor antennas. If your AP is
equipped with N-type connector, it will convert the antenna signal to N-Type connector. The cable has a
female N-Type connector on one side to connect with Outdoor AP/Mesh and male N-Type connector on
the other side to connect with outdoor antenna.
If you want to connect WH-9000MESH and WH-9100MESH to external antenna, you would need this
cable.
Speciîš¿cations
Connector type
- Male RP N-Type to Male N-Type
- Connect between outdoor AP and antenna
Length
- 1.5 meter
Impedance
- 50 Ohms nominal
Capacitance
- 24.5 pF/ft
Cut Off Frequency
- 65 GHz
Material
- Conductor: bare copper wire
- Insulation: PEF
- Shield: tinned copper wire
- Jacket: PVC
Attenuation
- 30MHz: 5.8 dB/100M
- 50MHz: 7.5 dB/100M
- 150MHz: 13.1 dB/100M
- 220MHz: 15.9 dB/100M
- 900MHz: 32.6 dB/100M
- 1500MHz: 42.4 dB/100M
- 2000MHz: 49.3 dB/100M
- 2500MHz: 55.4 dB/100M
- 5800MHz: 86.5 dB/100M
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Physical
- Minimum Bend Radius: 12.7mm
Ordering Information:
AirLive CFD-200-FNN-1.5M 1.5 Meter Antenna Cable
Temperature
- Operating: -55 to +200 degree C
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Loading...