Aiphone JK-DVF, JK-DA, JK-DV User Manual

FK1461ⒶP0109YI

JK-DA

Video door station
Poste de porte vidéo
Video portero
Videodeurpost met kunststof
opbouwbehuizing
Postazione videocitofonica
esterna

JK-DV

Vandal-resistant video door station
Portier vidéo résistant au vandalisme
Video portero antivandálico
Videodeurpost met metalen
antivandalisme-opbehuizing
Postazione videocitofonica esterna
resistente agli atti vandalici

JK-DVF

Vandal-resistant video door station
Portier vidéo résistant au vandalisme
Video portero antivandálico
Videodeurpost met inox antivandalisme­inbouwbehuizing
Postazione videocitofonica esterna
resistente agli atti vandalici

JK-DA, JK-DV, JK-DVF

VIDEO DOOR STATION

POSTE DE PORTE VIDÉO

VIDEO PORTERO

VIDEODEURPOST

POSTAZIONE VIDEOCITOFONICA ESTERNA

INSTALLATION MANUAL

MANUEL D’INSTALLATION

MANUAL DE INSTALACIÓN

INSTALLATIEHANDLEIDING

MANUALE D'INSTALLAZIONE

PRECAUTIONS

Flush mount back box

Special screws (x4)

General Prohibitions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water General Precautions

English

1

WARNING

(Negligence could result in death or serious injury.)

1. Do not dismantle or alter the unit. Fire or electric shock could result.

2. Existing wiring such as chime wiring, etc. may contain high voltage AC electricity.
Damage to the unit or electric shock could result. Wiring and installation should be
done by a qualified technician.

3. This unit is not an explosion-proof unit. Do not install or use the unit in locations
that are filled with flammable gas such as oxygen rooms. Fire or an explosion could
result.

PACKAGE CONTENTS

JK-DA

Front panel
Main unit

JK-DV  

Mounting screws
Mounting screws x 2
Wood mounting

Mounting screws (x4)
and anchor bolts (x4)

screws x 2

CAUTION

(Negligence could result in injury to people or damage to property.)

1. Before turning on power, make sure wires are not crossed or shorted. If not, fire or
electric shock could result.

2. Do not install or make any wire terminations while power supply is plugged in. It
can cause electrical shock or damage to the unit.

General Precautions

1. The door station is weather resistant, but do not spray high pressure water on door
station directly. Unit trouble could result.

INSTALLATION MANUAL

 Special screwdriver

Transparent nameplates x 2

2

JK-DVF

INSTALLATION

2-1 Mounting locations

"Do not install video door station in any of the following locations where lighting or the ambient environment could impact the display on the
video monitor due to the characteristics of the door station's camera."

Locations subject to direct

a

sunlight

Under street lights or door

b

lights

Other locations subject to strong

c

lighting or backlighting conditions

- 2 -

2-2 Mounting positions and image view area

◇ Wide picture

◇ Zoom picture

◆ The zoom position can be changed.

(Refer to the master station's operation manual.)
The factory setting is "Center " for Zoom mode.

Approx.

1,050 mm

(3' 5")

Approx. 700 mm (2' 3")

Approx. 900 mm (3')

◆ Objects appear smaller due
to greater distortion in the
surrounding sections compared
to the central section, but a
wider area is displayed.

The display range is a rough

estimation and may change
due to the installation
environment.

Up/Down

Mounting position

1,500 mm (5')

Left/Right

Approx. 1,050 mm (3' 5")

Approx. 2,000 mm

(6' 7")

Approx. 950 mm

(3' 2")

500 mm (20")

1,500 mm (5')

Unit center

Approx. 1,800 mm

(5' 11")

Approx. 1,050 mm (3' 5")

Approx. 750 mm

(2' 5")

Mounting position

1,300 mm (4' 3")

Unit center

1,300 mm (4' 3")

500 mm (20")

Approx. 170°

Left/Right

Up/Down

500 mm (20")

Zoom <Up>

Approx. 850 mm (2'9")

Approx. 1,400 mm

(4' 7")

500 mm (20")

Unit center

1,500 mm (5')

Approx. 700 mm

(2' 3")

Approx. 1,150 mm

(3' 9")

Zoom <Center> Zoom <Down>

Approx. 1,600 mm

(5' 4")

Approx. 850 mm

(2' 9")

500 mm (20")

Unit center

1,500 mm (5')

Zoom <Left> Zoom <Center> Zoom <Right>

500 mm (20")

500 mm

(20")

Approx. 100 mm (4")

Approx.

1,300 mm (4' 3")

Approx. 900 mm (3')

Approx.

1,300 mm (4' 3")

Approx. 100 mm (4")

Unit center

1,500 mm (5')

500 mm (20")

2

JK-1MD

JK-DA JK-DV JK-DVF

JK-1MED

M S

D

A

A

2

JK-1MED

JK-1MD

JK-1MED

JK-1MD

4

JK-DVJK-DA JK-DVF

JK-DVJK-DA JK-DVF

JK-1HD

2

JK-1SD

◇ Wide picture

English

500 mm (20")

◆ An area over a range of approx. 170° in a 500
mm radius from the camera displays.

(The display range is a rough estimation

and may change due to the installation
environment.)

2-3 Cable

PVC jacket with PE (polyethylene) insulated cable is

1

recommended.

Never use individual conductors, twisted pair cable or coaxial

2

cable.

◇ Zoom picture

Approx. 2,250 mm

(7' 5")

(when mounting position is 1,500 mm (5'))

Approx. 1,850 mm

(6' 1")

Approx. 750 mm

(2'5")

2-4 Wiring distance

Ø 0.65 mm 22 AWG Ø 1.0 mm 18 AWG

A 50 m 165' 100 m 330'

- 3 -

JK-DVF

ABC

3

JK-DA

① Removing the

main unit from the
mounting frame

Place " UP" upwards

Remove the main unit.
(Loosen the locking screws.)

Screwdriver

Tighten Loosen

Main unit

Mounting

screws x 2

1-gang box

83.5 mm
(3-5/16")

Mounting frame

 Drainage hole

Do not block the holes.

Front panel

Pry off the front panel with
a flathead screwdriver.

Flathead
screwdriver

Main unit

<Bottom surface>

③ Mount the main unit on

the mounting frame, and fit
the front panel on.

Removing the front panel

JK-DV

ABC

MOUNTING

English

Loosen

Special

screwdriver

②

Vandal-resistant front panel

75 mm

3''

Anchor bolts x 4

150 mm

5-15/16''

Using the transparent nameplates

Inserting the transparent nameplates

① Remove the vandal-resistant front panel.
② Peel off the protective seals on the plate (both sides).
③ Fill in the name of the resident on the transparent

nameplate.

Be sure to leave 25 mm (1") of white space on the left end

to account for insertion.

④ Insert the filled-in transparent nameplate at the specified

insertion opening (indicated with

To
insertion
opening

in diagram).

Tighten

Vandal-resistant front panel

Transparent

nameplate

Special

screwdriver

Tighten

Mounting

screws x 4

Drainage hole

Do not block the holes.

Flush mount

back box

110 mm

4-3/8''

180 mm

7-3/32''

45 mm
1-25/32''

Ø 6 mm
Ø 1/4"

35 mm
1-3/8"

① Remove the vandal-resistant front panel from the flush mount back

box.

② Peel off the protective seals on the plate (both sides).
③ Fill in the name of the resident on the transparent nameplate.

Be sure to leave 25 mm (1") of white space on the left end to

④ Insert the filled-in transparent nameplate at the specified insertion
opening on the rear side of the vandal-resistant front panel (indicated
with

25 mm

1"

Using the transparent nameplates

Inserting the transparent nameplates

account for insertion.

in diagram).

25 mm

1"

To
insertion
opening

To
insertion
opening

- 4 -

4

JK-1MED/1MD

A1

A2

2

NP

A1

A2

JK-DA JK-DV JK-DVF

JK-1MDJK-1MED

WIRING

English

NP:

Non-polarized

5

Technical precautions

• Operating temperature: -10 C to +60 C (+14 F to +140 F)

• Cleaning: Clean the units with a soft cloth dampened with a neutral household

6

• Camera unit:

• Scanning lines:

• Minimum subject

• Dimensions:

JK-DA: 129 (H) x 97 (W) x 35.5 (D) (mm)

JK-DV: 173 (H) x 98 (W) x 29.5 (D) (mm)
6-13/16 (H) x 3-7/8 (W) x 1 (D) (inches)
JK-DVF: 209 (H) x 135 (W) x exposed area 8 (D) (mm)
8-1/4 (H) x 5-5/16 (W) x 5/16 (D) (inches)
Flush mount back box: 180 (H) x 110 (W) x 45 (D) (mm)
(JK-DVF) 7-3/32 (H) X 4-3/8 (W) X 1-25/32 (D) (inches)

TECHNICAL PRECAUTIONS

cleanser. Do not use any abrasive cleaner or cloth.

SPECIFICATIONS

(CMOS)

illumination:

5-1/8 (H) x 3-7/8 (W) x 1-7/16 (D) (inches)

Complementary metal oxide semiconductor

525 lines

5 Lux at 50 cm (1'6") distance

DOOR

• Door station is weather resistant. However, do not spray high pressure water on
door station directly. Unit trouble could result.

• Weight:

JK-DA: Approx. 190 g (0.42 lbs.)
JK-DV: Approx. 650 g (1.43 lbs.)
JK-DVF: Approx. 580 g (1.27 lbs.)
Flush mount back box: Approx. 450 g (1.0 lbs.)
(JK-DVF)

- 5 -

Warranty

English

Français

Español

Nederlands

Italiano

Aiphone warrants thats its products have no material or workmanship defects under normal use conditions for two years after delivery to the end user. Aiphone will perform repair
or replacement free of charge if the product is defective and the warranty applies to the defect. Aiphone reserves unto itself the sole right to make the final decision whether there is
a defect in materials and/or workmanship and whether or not the product is under warranty. This warranty shall not apply to any Aiphone product which has been subject to misuse,
neglect, accident, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover
batteries or damage caused by batteries used in connection with the unit. This warranty only includes carry-in repairs. Any repairs must be made at the shop or place designated in
writing by Aiphone. Aiphone will not be responsible for any costs incurred during on-site service calls. Aiphone will not provide compensation for any loss or damage incurred by
the breakdown or malfunction of its products during use, or for any consequent inconvenience or losses that may result.

The object area of is the EU.

Garantie

Aiphone garantit que ce produit ne présente pas de défaut matériel ou de fabrication dans des conditions normales d'utilisation pendant les deux années suivant la livraison à
l'utilisateur final. Aiphone en effectuera gratuitement la réparation ou le remplacement si le produit est défectueux et que la garantie s'applique pour le défaut. Aiphone se réserve
le droit exclusif de décider s’il existe ou non un défaut de matière ou de fabrication et si l’appareil est ou non couvert par la garantie. Cette garantie ne s’applique pas à tout
produit Aiphone qui a été l’objet d’une utilisation impropre, de négligence, d’un accident ou qui a été utilisé en dépit des instructions fournies; elle ne couvre pas non plus les
appareils qui ont été réparés ou modifiés en dehors de l’usine. Cette garantie ne couvre pas les piles ni les dégâts infligés par les piles utilisées dans l’appareil. Cette garantie
comprend uniquement les réparations en atelier. Toutes les réparations doivent être réalisées à l'atelier ou au site désigné par écrit par Aiphone. Aiphone décline toute responsabilité
en cas de frais encourus pour les dépannages à domicile. Aiphone n’indemnisera pas le client en cas de pertes, de dommages ou de désagréments causés par une panne ou un
dysfonctionnement d’un de ses produits.

La zone d’application de est l’UE.

Garantía

Aiphone garantiza que sus productos no tienen defectos de material ni de mano de obra bajo condiciones de uso normal durante dos años tras su entrega al usuario final. Aiphone
realizará la reparación o cambio libre de costo si el producto está defectuoso y la garantía se aplica al defecto. AIPHONE se reserva el derecho de tomar la decisión final de si hay o
no defectos de material y/o de mano de obra, y de si el producto está o no cubierto por la garantía. Esta garantía no cubre ningún producto AIPHONE que haya sido mal utilizado,
descuidado, accidentado, o empleado violando las instrucciones suministradas; la garantía tampoco se aplica a unidades que hayan sido reparadas o alteradas por personas fuera de
la fábrica. Esta garantía no cubre las pilas ni los daños causados por pilas utilizadas asociadas a la unidad. Esta garantía sólo incluye reparaciones acarreadas por el cliente. Todas
las reparaciones deben realizarse en el taller o lugar que Aiphone designe por escrito. Aiphone no se responsabilizará de los gastos generados durante llamadas de servicio. Aiphone
no indemnizará por ninguna pérdida o daño en que se incurra debido a la avería o falla de sus productos durante su uso, ni por ningún inconveniente o pérdida que se produzca
como consecuencia.

El área del objeto es la EU.

Garantie

Aiphone garandeert dat zijn producten onder normale gebruiksomstandigheden gedurende twee jaar na levering aan de eindgebruiker vrij zijn van materiaal- of fabricagefouten.
Aiphone zal het product kosteloos herstellen of vervangen als het defect is en de garantie van toepassing is op het defect. Aiphone behoudt zich het recht voor om als enige
definitief te bepalen of er al dan niet sprake is van een materiaal- en/of fabricagefout; en of het product nog onder garantie is. Deze garantie geldt niet voor een Aiphone-product dat
is blootgesteld aan verkeerd gebruik, verwaarlozing, een ongeval of verkeerde bediening en evenmin voor toestellen die buiten de fabriek zijn hersteld of gewijzigd. Deze garantie
geldt niet voor batterijen of schade veroorzaakt door batterijen die in het toestel zijn gebruikt. Deze garantie geldt uitsluitend voor herstellingen die worden ingeleverd en opgehaald
door de klant. Alle herstellingen moeten worden uitgevoerd in de winkel of op de plaats die schriftelijk is aangeduid door Aiphone. Kosten die gepaard gaan met herstellingen ter
plaatse kunnen niet worden verhaald op Aiphone. Er kan geen schadeloosstelling van Aiphone worden geëist voor enig verlies of schade als gevolg van een defect of storing tijdens
het gebruik van zijn producten, of voor enig ongemak of verlies dat hieruit voortvloeit.

Het toepassingsgebied van is de EU.

Garanzia

La Aiphone garantisce che i suoi prodotti saranno privi di difetti nei materiali o nella lavorazione, in condizioni di utilizzo normali, per un periodo di due anni dalla consegna
all’utente finale. La Aiphone eseguirà la riparazione o la sostituzione gratuita del prodotto qualora tale prodotto debba risultare difettoso e la garanzia sia applicabile al difetto
rilevato. La Aiphone si riserva il diritto esclusivo di stabilire in via definitiva se sono presenti difetti nei materiali e/o nella lavorazione e se il prodotto è coperto dalla garanzia
oppure no. La presente garanzia non è applicabile ad alcun prodotto Aiphone che sia stato sottoposto ad uso improprio, negligenza, incidente, o che sia stato utilizzato in violazione
alle istruzioni fornite, né può essere estesa alle unità che sono state riparate o manomesse al di fuori della fabbrica. Questa garanzia non copre le batterie né i danni causati dalle
batterie usate in connessione con l’unità. Questa garanzia copre solo le riparazioni del prodotto consegnato presso il punto designato. Le eventuali riparazioni devono essere eseguite
presso l’officina o il luogo designato per iscritto dalla Aiphone. La Aiphone non potrà essere ritenuta responsabile di eventuali costi sostenuti in caso di chiamata per l’assistenza
sul posto. La Aiphone non offrirà alcun compenso per gli eventuali danni o perdite subiti a causa della rottura o del guasto dei suoi prodotti durante l’uso, o per qualsiasi disagio o
perdita conseguente che si dovesse verificare.

L’area oggetto del è l’UE.

- 6 -

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:・Reorient or relocate the receiving antenna・Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. Increase the separation between the equipment and receiver.・Consult the dealer or an experienced radio/TV technician for help.

- 7-

http://www.aiphone.com/

AIPHONE CO., LTD., NAGOYA, JAPAN

AIPHONE CORPORATION, BELLEVUE, WA, USA

AIPHONE S.A.S., LISSES-EVRY, FRANCE