Aiphone JK-1MD User Manual

JK-1MD

HANDS FREE COLOR VIDEO INTERCOM

MASTER MONITOR STATION

INTERPHONE VIDEO COULEUR MAINS LIBRES

MONITEUR MAÎTRE

VIDEO INTERCOMUNICADOR A COLOR MANOS LIBRES

APARATO PRINCIPAL CON MONITOR

HANDENVRIJE KLEURENVIDEOFONIE

MONITOR-HOOFDPOST

VIDEOCITOFONO A COLORI A VIVAVOCE

POSTAZIONE DI MONITORAGGIO PRINCIPALE

FK1459 Ⓐ P0109YI

JK-1MD

Master monitor station Moniteur maître Aparato principal con monitor Monitor-hoofdpost Postazione di monitoraggio principale

INSTALLATION & OPERATION MANUAL

MANUEL D’INSTALLATION ET D’UTILISATION

MANUAL DE INSTALACIÓN Y OPERACIÓN

INSTALLATIE- EN GEBRUIKSHANDLEIDING

MANUALE D'INSTALLAZIONE E USO

PRECAUTIONS

General Prohibitions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water General Precautions

WARNING

(Negligence could result in death or serious injury.)

EnglishFrançaisEspañolNederlandsItaliano

1. High voltage is present internally. Do not open the case. Electric shock could result.

2. Do not dismantle or alter the unit. Fire or electric shock could result.

3. Do not a non-speciﬁed power sources to the +, - terminals. Also, do not install two power supplies in parallel to a single input. Fire or damage to the unit could result.

4. Keep the unit away from water or any other liquid. Fire or electric shock could result.

5. Do not put any metal or ﬂammable material into the unit through the openings. Fire or electric shock could result.

6. Do not use a power supply with a voltage other than the speciﬁed voltage. Fire or electric shock could result.

7. Do not connect any terminal on the unit to an AC power line. Fire or electric shock could result.

CAUTION

(Negligence could result in injury to people or damage to property.)

1. Do not install or make any wire terminations while power supply is plugged in. It can cause electrical shock or damage to the unit.

2. Before turning on power, make sure wires are not crossed or shorted. If not, ﬁre or electric shock could result.

3. When mounting the unit on a wall, install the unit in a convenient location, but not where it could be jarred or bumped. Injury could result.

4. For power supply, use Aiphone power supply model or model speciﬁed for use with system. If non-speciﬁed product is used, ﬁre or malfunction could result.

5. Do not install the unit in any of the following locations. Fire, electric shock, or unit trouble could result.

* Places under direct sunlight or places near heating equipment that varies in

temperature.

* Places subject to dust, oil, chemicals, etc. * Places subject to moisture and humidity extremes, such as bathrooms, cellars,

greenhouses, etc.

* Places where the temperature is quite low, such as

front of an air conditioner.

* Places subject to steam or smoke (near heating or cooking surfaces). * Where noise generating devices such as dimmer switches or inverter electrical

appliances are close by.

* Do not install the unit in locations subject to frequent vibration or impact.

6. Do not put anything on the unit or cover the unit with cloth, etc. Fire or unit trouble could result.

7. Do not press on the LCD or subject it to a high impact. The LCD glass could be punctured and result in an injury.

8. If the LCD is punctured, do not allow contact with the liquid crystal inside. Inﬂammation could result.

* In the event that liquid crystal enters your mouth, immediately gargle with water

and seek medical attention.

* If contact with the eyes or skin occurs, clean with pure water for at least 15 minutes

and seek medical attention.

inside a refrigerated area or in

1. Keep the unit more than 1 m away from radio or TV set.

General Precautions

2. This unit is for indoor use only. Do not use outdoors.

3. In areas where broadcasting station antennas are close by, the intercom system may be affected by radio frequency interference.

4. As to other manufacturer's devices (such as sensor, detectors, door releases) used with this system, comply with the Speciﬁcations and Warranty conditions that the manufacturers or venders present.

5. K

eep the intercom wires at least 30 cm (12") away from AC 100-240 V lines. Noise

and malfunction could result.

6. If the unit is down or does not operate properly, unplug the power supply or turn off the JK-1MD and JK1-1HD (JK-1SD) POWER switches.

7. The unit is for wall-mount use only. For desktop applications, use desk stand.

8. When wall-mounted, the top of the unit may darken. This does not indica malfunction.

9. The unit case may become warm with use, but this is not a unit malfunction.

10. If a cellular phone is used close by, the unit may malfunction.

11. The LCD panel is manufactured with very high precision techniques. Small portions of the panel may fail to light up or some portions may be constantly lit, but this does not indicate a unit malfunction. Please be aware of this in adva

12. Refrain from using the color monitor station in sunlit areas.

13. At night, due to reduced lighting on the object, the monitor sees more noise and the face becomes more difﬁcult to see, but this is not malfunction.

14. Talk within 50 cm (20") or less from the unit. If you stand too far away, it may be difﬁcult for the other person to hear the communication.

15. If there are loud noises around sound may break up and be difﬁcult to hear.

16. During communication, if you speak before the other person has ﬁnished talking, your voice may not be heard. Communication will proceed smoothly if you wait until the other person has ﬁnished before speaking.

17. At a gate or porch illuminated by ﬂuorescent lamp, the picture may vary, but this i not a malfunction.

18. When the outside temperature lowers sharply after rainfall, etc., the inside of the video door station may fog up slightly and cause the video image to be blurry, but this is not a malfunction. Normal operation will be restored when moisture evaporates.

19. Due to the environmental sound around the unit, it may hinder smooth communication, but this is not a malfunction.

20. T

he outline of video images displayed by video door station may differ from that of

the actual person(s) or background, but this is not a malfunction.

21. If the screen of a video door station freezes during wintertime, the picture may become difﬁcult to see or the CALL button may not move, but this is not a malfunction.

22. This unit is not interchangeable with JA, JF, KB, and KC series units.

23. Wa

rm-color lighting shining on the door station may change the tint of the picture on

the monitor.

the unit (such as music playing or children crying), the

te a

nce.

PACKAGE CONTENTS

JK-1MD Mounting screws x 2 Wood mounting screws x 2

Option connector Installation & Operation manual

- 2 -

+ 5 cm

(2")

+ 5 cm

(2")

JK-1MD / JK-1HD

+ 15 cm

(6")

JK-1HD

JK-1SD

JK-1MD

JK-DA JK-DV

JK-DVF

PS18

PS-1820 PS-1810DIN PS-1820DIN

IER-2

(x2)

JK-1MD JK-1HD/JK-1SD

120 120

A1 A2

B1 B2

L L

S S

SW SW

B1 B2

INSTALLATION

2-1 Mounting locations

Install the master monitor station in a place

where the screen is not exposed to direct sunlight.

The master monitor station has switches on

both sides. Allow at least 5 cm (2") of open space on either side.

2-2 Wiring method, wiring distance

Wire the units from station-to-station (daisy-chained).

Allow 15 cm (6") or more of vertical open

space from the center of the mounting bracket in order to mount the master monitor station.

English Français Español Nederlands Italiano

2-3 Cable

Use PVC-coated cable with PE (polyethylene) insulation.

Never use individual conductors, twisted pair cable or coaxial cable.

0.65 mm 22 AWGØ 1.0 mm 18 AWG A 50 m 165' 100 m 330' B 5 m 16' 10 m 33' C 75 m 245' 150 m 490'

When using a cable with unused conductors, terminate both ends of

the unused pair(s) with a 120 Ω resistor.

- 3 -

JK-1MD

PS-1810DIN/

PS-1820DIN

PS-1820

[3]

BR: Brown RD: Red OR: Orange YE: Yellow GR: Green BL: Blue

V -

V +

[1]

[2]

[3]

(BR) (RD) (OR)

(YE) (GR)

(BL)

Press-to-talk setting: Press-to-talk can be set to be enabled or disabled.

Press-to-talk setting Switch initial setting [ON]

MOUNTING

Back wiring

Mounting screws x 2

EnglishFrançaisEspañolNederlandsItaliano

1. Press RELEASE button (to insert or remove the wire).

2. Insert the cable into the terminal.

Surface wiring

When a 1-gang box is not mounted, the cable can be routed as surface wiring to the top or bottom of the unit. Cut a cable inlet on the upper part of the unit to allow passage of the wiring into the unit.

* To pass the cable through the rear

side of the unit, cut out a cable inlet section.

Mounting bracket

1-gang box

83.5 mm (3-5/16")

8 mm (3/8")

Mounting bracket

Din rail

1-gang box

Wood mounting screws x 2

Mounting bracket

83.5 mm (3-5/16")

Option connector: Control external devices connected with the option connector.

To prevent shorts, be sure to cut unused lead wires at the bottom and insulate the ends.

[1]Video signal output: Video can be output to DVR, etc. (NTSC, 1 Vp-p/75 Ω ) Wiring distance: 3 m (10') NOTES: When a video signal is output, the monitor

A video signal is only output during calling from a door

station to the JK-1M door station and the JK-1MD/during monitoring from the

JK-1MD (screen playing recorded pictures is not output). [2]Options output (AC/DC 24 V, 1.6 A N/O dry closure contact) (Minimum contact: 100 mV DC, 0.1 mA)

station may produce a buzzing sound depending on the installation environment.

D/during communication between a

83.5 mm (3-5/16")

ON: Press-to-talk enabled OFF: Press-to-talk disabled

[3]External sensor input

External sensor input speciﬁcations

N/O dry closure contact

Input method

Detection conﬁrmation time 100 mS or more

Contact resistance During dry closure: Less than 700 Ω

Terminal short current Less than 10 mA

Voltage between terminals Less than DC 20 V (when open between terminals)

- 4 -

External sensor input (start signal only detection method)

During N/C dry closure: At least 3 k Ω

+ 8 hidden pages