Ag Leader Versa DirectCommand Advanced Seed Monitor Reference Guides

Seed Tube Monitor Module

To create a conguration, make the following button presses to start the Conguration Wizard and then follow
the instructions given on the display.

Enter Settings

Conguration Product

Planting

Press to Highlight Conguration

8360,1770,3dr

Planting

Select the
number of
interplant
rows

Select device which will be used to supply ground speed

See Below

Start of Conguration Wizard

Select the number of
standard rows (does
not include interplant
rows)

See Next Page

Congure High and Low population alarms.

Each row can be set independently

Used to manually edit the sensor # that is designated to
a row #

Enable/Disable a sensor

Automatically appoints sensor #1 as row #1, and so on.
(This must be performed for the new conguration to

become active)
Removes individual seed tube sensors

Sets Row Spacing

Quick Reference Guide

2006005-ENG Rev A

1

Seed Tube Monitor Module

To start the Field Operation Wizard and load a conguration:

Conguration

Start Field Operation

Drop down menu (crop type)

Select crop type to be planted (this option
is only used to crops compatible with
Advanced Seed Tube Monitoring)

This value determines how close 2 seeds
must be planted to one another for it to
be determined as a double

This value determines how close 2 seeds
must be planted to one another for it to

be determined as a poorly spaced seed.

To view run screen:

Congure High and Low population arms. Each row can be set independently

Adjusts the displayed planted population

by this factor. Value should be 1 for corn.
Increase for higher population crops, for which

the seed tube sensor may be unable to count
each seed individually

Advanced Seed Monitoring (only available for compatible crop types)

Adjusts the Double Seed Threshold and Poor
Spacing Threshold

Display will alarm when singulation is below

this value: Singulation = % skips + % doubles

Display will alarm when spacing quality is
below this value

Disables alarms that would otherwise occur when planter clutches are commanded to a no-

plant state. This option should typically be enabled

Opens module diagnostics screen
Displays seeds/second and seeds/acre for each seed tube sensor

Quick Reference Guide

2006005-ENG Rev A

2