Ag Leader Trimble MS750 Instructions

2202 South Riverside Drive, Ames, IA 50010

Phone: [phone] Internet: http://www.agleader.com

Trimble MS750 tee cable (p/n: 4002303-10) with a Repeater Radio kit (p/n: 4100652-1):

• Install the tee cable between the power/data connection at the MS750 Base Station on Port A as shown below.

• Configure the MS750 to output CMR+ connections on the connected port at 38400 8N1.

• Configure the Radio as a Base Station with your Base Station ID using AF Link program.

o If using a Repeater, the yellow wire should be in Pin 12 of the 12-pin Deutsch connection
o If using a Tower Radio, the yellow wire should be in Pin 9 of the 12-pin Deutsch connection

• Connect the power-in lead to a fused 12v power supply to provide power to the Repeater Radio.

1/11/2011 Rev A

1