H
C
HOME
EALTH ARE
Imaging >
Order-No.: DD+DIS100.02E
Technical
Documentation
*1U67N81*
1 Piece U67N8 MA1
ADC System Components
Type 4406
Please file this document in section 6.2
of your Technical Documentation ADC System
Description of the
Printer Definition Files
(Version PRN.A.3.0.02)
List of Contents
1 General Information on "Printer Definition Files" (P.D.F.)........................ 1
2 Description of the Printer Definition Floppy .............................................. 1
3 Installation of the "Printer Definition Files" ............................................... 2
4 Installation on the Processing Station........................................................ 2
5 Installation on CCM.1.1.06 ........................................................................... 2
6 Special Configuration Items in the "Printer Definition Files" ................... 3
7 Supported Printers (Version PRN.A.3.0.02)................................................ 4
printed in Germany 06 / 2002
Repair and Service
HOME
DD+DIS100.02E Tools and Auxiliary Equipment
1 General Information on "Printer Definition Files" (P.D.F.)
Via the "printer definition files" non AGFA DICOM printers can be integrated into an ADC
System. Each “printer definition file” contains information about one certain printer type and
model. Parameters maybe supported film sizes, used media type or pixels per millimeter. The
evaluation and release of these files is done by headquarter people. Thus, no manipulation of
that files should be necessary in the field.
The printer definition files will be distributed independently from VIPS / CCM software
releases in the future. They will be distributed when new connectivity to printers has been
released (normally on a floppy with a version number (current version:PRN.A.3.0.02) or via
MedNet. (MedNet path: Computed Radiology / ADC System Components / CSO Freeware /
Printer Definition Files PRN.A.3.0.02) The current version of that “printer definition files” will be
included in the upgrade package for the VIPS.1.2.00.
From VIPS.1.1.09 and CCM.1.1.05 on, there is a possibility provided to download the newly
released “printer definition files”. Please note that the current version PRN.A.3.0.02 of the
"printer definition files" is not integrated as default in the printer list of CCM 1.1.06. It still has to
be downloaded to the CCM.1.1.06. The procedure is described below.
The "printer definition files" have already been introduced with VIPS 1.1.05 to send to non
AGFA DICOM Printers and increase the number of print layouts for the SmartPrint option.
However, we did not yet have the flexibility there to update the “known printer” database in the
CCM and VIPS software respectively, without upgrading the software. This is now possible in
an easy manner.
2 Description of the Printer Definition Floppy
The release of P.D.F. is managed by Integration Engineering, whereas the distribution is done
by HE GSO. Each set of P.D.F release has a version encoded as
The contents is:
· Multiple PRINTER-ID.txt printer definition files for VIPS, containing date and
version for IE version management
· PRINTERS.prd listing file for VIPS Maintenance menu procedures. This file contains
for each printer definition file on the floppy a line with these fields:
# printer file comment
PRINTER-ID PRINTER-ID.txt Free text
... ... ...
· Printers.mdb file for CCM tool, containing tables for printers and film sizes,
containing the version PRN.X.n.n.nn and date
· VERSION file, containing version PRN.X.n.n.nn and date
PRN.X.n.n.nn
Edition 1, Revision 11 ADC System Components / (Type 4406) Section 6.2 / 1
Repair and Service
HOME
Tools and Auxiliary Equipment DD+DIS100.02E
3 Installation of the "Printer Definition Files"
Make sure you are installing a set of printer definition files (PDF) that is
compatible with the cpf-file that is used on this system
Current configuration:
· Printer definition file floppy PRN.A.3.0.02
· CCM – tool 1.1.06
· VIPS 1.2.00
4 Installation on the Processing Station
The upgrade of the set of P.D.F.s in your VIPS software may make it
necessary to redo some printer settings in the cpf-file with CCM.1.1.06.
Please consider that if you have printing problems after the upgrade, redo
the cpf-file with CCM 1.1.06
No. Procedure Steps Display / Comment
1. Go to <Maintenance>, enter password
and hit <Return>
2.
Insert "Printer definition files" floppy disk
3. Select:
2 to select Install and hit <Return>
8 to select Printers and hit <Return>
1 to select CopyPrinters and hit
<Return>
4.
Exit <Maintenance>
Files are copied.
You are asked to confirm every file that has
to be overwritten.
5 Installation on CCM.1.1.06
CCM.1.1.06 requires the installation of P.D.F - PRN.A.3.0.02
No. Procedure Steps Display / Comment
1.
Start CCM.1.1.06 tool
2. Click button
<Destinations configuration>
3.
Click button <Hardcopy>
4. Insert Printer definition file floppy
PRN.A.3.0.02 into floppy drive
Click button <Read new printer
5.
definition file from drive A:>
6.
Click <Yes> to import from floppy
7.
Click <Ok>
8. Restart CCM.1.1.06 tool to integrate the
new file
Section 6.2 / 2 ADC System Components / (Type 4406) Edition 1, Revision 11
Comparison of current version and version
on floppy takes place
Printer definition files successfully imported
Repair and Service
HOME
DD+DIS100.02E Tools and Auxiliary Equipment
6 Special Configuration Items in the "Printer Definition Files"
Activating Film Orientations on the Processing Station
for printers with insufficient RAM for image rotation
Due to a lack of memory (RAM) some printers only support one film orientation for certain film
sizes. There is a possibility to activate the other film orientation by editing the concerned
"printer definition file". From VIPS 1.1.09 on, the Processing Station provides the possibility to
rotate the image in a background process. The image is then sent to the printer and printed on
the available film orientation. The printer does not have to rotate the image locally.
This setting is activated as default for the Sterling LP 400, which only prints 14" x 17" film in
portrait orientation. By adding the entry "HCP_ORIENTATION PORTRAIT" to the settings for
the 14" x 17" film in landscape orientation, the rotation of the image will be done on the
Processing Station.
Extract of the file:
Edition 1, Revision 11 ADC System Components / (Type 4406) Section 6.2 / 3
Repair and Service
HOME
Tools and Auxiliary Equipment DD+DIS100.02E
7 Supported Printers (Version PRN.A.3.0.02)
Supplier Printer Printer Definition File
3M Imation 8100 3M_8100
Imation 8300 3M_8300
Imation 8500 3M_8500
Imation 8600 3M_8600
Imation 8700 3M_8700
Imation HQ969 3M_HQ969
Kodak Kodak KELP100XLP KOD_KELP100XLP
Kodak KELP1120 DPS KOD_KELP1120_DPS
Kodak KELP1120 PIU KOD_KELP1120_PIU
Kodak KELP2180 DPS KOD_KELP2180_DPS
Kodak KELP2180 PIU KOD_KELP2180_PIU
Kodak MLP190 KOD_MLP190
Kodak XLT7720 KOD_XLT7720
Sterling Sterling DI200 STE_DI200
Sterling DI400 STE_DI400
Sterling LP400 STE_LP400
Sterling SIJ100 STE_SIJ100
Sterling SIJ400 STE_SIJ400
Sterling SIJ400 Paper STE_SIJ400papter
Fuji Fuji FL-IM D FUJ_FL_IMD
Fuji FL-IM DM FUJ_FL_IMDM
Fuji FL-IM3543II FUJ_IM3543
Fuji FL-IM3535II FUJ_FL-IM3535II
Fuji FL-IM2636II FUJ_IM2636
Fuji CR-LP D FUJ_CR-LPD
Fuji CR-LP415 FUJ_CR-LP415
Fuji FM-DP L FUJ_FM-DPL
Fuji CR-DP L FUJ_CR-DPL
Fuji FM-DP2636 FUJ_FM-DP2636
Fuji FM-DP3543 FUJ_FM-DP3543
Fuji CR-DP T FUJ_CR-DPT
Fuji CR-DP3543T FUJ_CR-DP3543T
Agfa DI2000 DI2000
DI3000 1114 DI3000_1114
DI3000 1414 DI3000_1414
DI3000 1417 DI3000_1417
DI4500 DI4500
DI4500 Low Res DI4500LR
LR3300 LR3300
LR5200 LR5200
LR5200 High Res LR5200HR
Codonics NP1600 COD_NP1600
NP1660 COD_NP1660
Section 6.2 / 4 ADC System Components / (Type 4406) Edition 1, Revision 11
Loading...