AES SLIM User Manual

1 | P a g e

End User Instructions

SLIMCLASSIC & SLIMHANDSFREE

Manual Version 1

For Service, Warranty and Support Contact:

Installed By:

Install Company Name:

Installer Phone Number:

Installer Email Address:

Date of Install:

The manufacturer cannot legally offer technical support to non-qualified gate

or door installers. End users should employ the services of a professional

install company to commission or support this product!

2 | P a g e

General Features

SLIMCLASSIC

Hand set

Earpiece

Microphone

Press to cycle ring
tones then
answer/end call
button to confirm.
HOLD for 5 secs to
mute calls.

Press for inter-calling

Door/gate release.
Momentary press for
gates. Press & hold
for magnetic lock

TIP: Press to open
communications before
gate/door can be
triggered.
Press and HOLD to
turn off handset.

3 | P a g e

SLIMHANDSFREE

Keypad overview

This keypad has 3 outputs, all independent from the intercom/app relays. The diagram below
shows the LED indicators which indicate programming and relay status information.

RED when incorrect codes entered and outputs are locked out.

1 2 3
4 5 6
7 8 9
* 0 #

SLOW FLASHING - in normal standby mode.
ON in programming mode.
ON when relay 3 activated.

GREEN when output 1 activated.
RED when output 2 activated.
CLEAR when output 3 activated

FAST FLASHING – Wrong code entered / error.

TIP: Amber light flashes to indicate standby mode.
TIP: Simply enter your code to trigger gates or door.

Press to cycle ring
tones then
answer/end call
button to confirm.
HOLD for 5 secs to
mute calls.

Press for inter-calling

Door/gate release.
Momentary press for
gates. Press & hold
for magnetic lock

Answer/end calls.
TIP: Press to open
communications
before gate/door
can be triggered.
Press and HOLD to
turn off handset.

Loudspeaker

Microphone

4 | P a g e

Using a Standard Keypad Code

Simply enter the code to trigger the gate or release the door.

Using a Latching Code

Enter the latching code on automatic gates to hold them open. Note: the code will need entered
again to unlatch the gates.

The manufacturer cannot legally offer technical support to non-qualified gate

or door installers. End users should employ the services of a professional

install company to commission or support this product! Please direct support

questions to your professional installer / dealer.