AeroGarden 100633, 200633, 00633-DSS User Manual

4 (1)

Quick Start

Guide

English

Simple Steps

To Get Your “Trellis-Ready”*

Up and Growing

*Trellis System not included. See page 13 for details.

THIS

GUIDE!

 

KEEP

 

 

 

 

Model #: 100633-DSS

Date Code:

 

Input Voltage: 120V, 60Hz, 1.5A

 

 

 

 

 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

(Save These Instructions)

When using this AeroGarden6 Elite+ electrical furnishing, basic precautions should always be followed, including the following:

Read all instructions before using this AeroGarden furnishing.

1. To reduce the risk of electric shock, the AeroGarden has a specific plug. Do not change the plug in any way.

DANGER– to reduce risk of electric shock:

2. Always unplug AeroGarden from electrical outlet before cleaning or changing Grow Bulbs (light bulbs). WARNING– to reduce risk of burns, fire, electric shock, or injury to persons:

3.Unplug AeroGarden from outlet before putting on or taking off parts.

4.Close supervision is necessary when AeroGarden is used by or near children, invalids, or disabled persons.

5.Use AeroGarden only for its intended use as described in instructions. Do not use attachments not recommended by manufacturer.

6.Never operate AeroGarden if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact www.aerogardensupport.com or your country’s local distributor for instructions.

7.Keep cord away from heated surfaces.

8.Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.

9.Never drop or insert any object into any electrical openings.

10.Do not use outdoors.

11.Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

12.Do not touch moving parts or hot parts such as pumps, bulbs, reflective surfaces, and the like.

13.To disconnect, remove plug from outlet.

14.Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it.

15.Do not allow water to contact hot light bulbs.

16.Use only approved and supplied parts and accessories. Use only lamp model 100633 (N. America) or 200633 (Europe & Australia) Grow Bulbs with this AeroGarden model. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from www.aerogardensupport.com or from your retailer.

17.Do not use AeroGarden for other than intended purpose.

18.This product is intended for household and residential use only. This product is not approved for commercial applications.

19.Read and follow all important notices on the AeroGarden and in the accompanying literature.

20.If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid a hazard.

21.Electrical wiring must be in accordance with local regulations.

22.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety.

23.Children should be supervised to ensure they do not play with the appliance.

Save These Instructions

1

AeroGarden 100633, 200633, 00633-DSS User Manual

1 Quick Start Assembly (No tools required)

A Unpack Your AeroGardenElite+6

Lamp Hood

(front view)

Bowl

(front view)

Lamp Arm

(back view)

Base

(front view)

Seed Kit

Deluxe Grow Bulbs (3)

CInsert Grow Bulbs into Lamp Hood

Lamp Hood (bottom view)

Push straight in.

DO NOT TWIST BULBS!

Remember to replace Grow Bulbs every 6 months.

BInsert Lamp Arm into Base

Push

 

Lamp Arm

 

down until

Lamp Arm

you hear

(back view)

a “click.”

 

Base

(back view)

DPlug Lamp Cord into Lamp Hood

Push Lamp Cord firmly into socket in Lamp Hood.

Lamp

Cord

Instructions Continued On Next Page

2

1 Quick Start Assembly (continued)

E Place Lamp Hood

F Set Bowl into Base

on Lamp Arm

Air Coupling

Center hands

over Lamp Arm

(back view)

(front view)

and push Lamp

 

 

 

Hood down

 

 

until you hear a

 

Check to be sure that Bowl is

“click.”

 

 

securely seated on Air Coupling in Base.

 

 

G Unpack Your AeroGardenElite+6

Use one hand to grasp Lamp Arm.

Need Additional HELP?

For supplies and information, visit… www.aerogardensupport.com

Gently slide AeroGarden toward the surface edge and place other hand under Base.

3

H Place Your Garden

Under: A space that allows 35” (89cm) clearance for the full height of raised lamp

On: A sturdy, watertolerant surface

(Metal surfaces may cause noise due to vibration)

In: A 60-75°F (16-24°C) environment

(optimal)

Near: A standard electrical outlet, per local regulations

68°F/20°C

Note: Do not place beneath under-cabinet lights.

Away From

Reach of children and pets

Direct sources of heat (e.g., stove, furnace vents)

Direct sources of cold air (e.g., window drafts, A/C vents)

For Optimal Tending & Harvesting, Also Consider

Easy access to un-softened water

4

Loading...
+ 11 hidden pages