100610-WHT
Quick Start
Guide
Simple Steps
English
To Get Your
Up and Growing
Model #s: 100610-BLK; 100610-WHT; 100610-SLR
Input Voltage: 120V, 60Hz, 1.5A
KEEP THIS GUIDE!
Date Code:
IMPORTANT SAFETY INSTRUCTIONS
(SAVE THESE INSTRUCTIONS)
When using this AeroGarden6 electrical furnishing, basic precautions should always be followed, including
the following:
Read all instructions before using this AeroGarden furnishing.
1. To reduce the risk of electric shock, the AeroGarden has a specific plug. Do not change the plug in any way.
DANGER
2. Always unplug AeroGarden from electrical outlet before cleaning or changing Grow Bulbs (light bulbs).
WARNING
3. Unplug AeroGarden from outlet before putting on or taking off parts.
4. Close supervision is necessary when AeroGarden is used by or near children, invalids, or disabled persons.
5. Use AeroGarden only for its intended use as described in instructions. Do not use attachments not recommended by manufacturer.
6. Never operate AeroGarden if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or
if it has been dropped in water. If any of these conditions occur/exist, contact www.aerogardensupport.com or your country’s local distributor for instructions.
7. Keep cord away from heated surfaces.
8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.
9. Never drop or insert any object into any electrical openings.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Do not touch moving parts or hot parts such as pumps, bulbs, reflective surfaces, and the like.
13. To disconnect, remove plug from outlet.
14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it.
15. Do not allow water to contact hot light bulbs.
16. Use only approved and supplied parts and accessories. Use only lamp model 100340 (N. America) or 200340 (Europe & Australia) Grow Bulbs with this AeroGarden model. Use of any other kind of accessory is not recommended. Replacement parts can be
ordered from www.aerogardensupport.com or from your retailer.
17. Do not use AeroGarden for other than intended purpose.
18. This product is intended for household and residential use only. This product is not approved for commercial applications.
19. Read and follow all important notices on the AeroGarden and in the accompanying literature.
20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to
avoid a hazard.
21. Electrical wiring must be in accordance with local regulations.
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety.
23. Children should be supervised to ensure they do not play with the appliance.
– to reduce risk of electric shock:
– to reduce risk of burns, fire, electric shock, or injury to persons:
1
SAVE THESE INSTRUCTIONS
1
Quick Start Assembly (No tools required)
Unpack Your AeroGarden
A
Lamp Hood
(front view)
Bowl
(front view)
Base
(front view)
Lamp Arm
(back view)
6
Insert Lamp Arm
B
into Base
Push
Lamp Arm
down until
you hear
a “click.”
Lamp Arm
(back view)
Base
(back view)
Deluxe B Grow Bulbs (2)
Insert Grow Bulbs
C
into Lamp Hood
Lamp Hood (bottom view)
Push straight in.
DO NOT TWIST BULBS!
Seed Kit
D
Plug Lamp Cord
into Lamp Hood
Push Lamp Cord
firmly into socket
in Lamp Hood.
Lamp
Cord
Remember to replace Grow Bulbs every 6 months.
Instructions Continued On Next Page
2
1
Quick Start Assembly (continued)
Place Lamp Hood
E
on Lamp Arm
Center hands
over Lamp Arm
and push Lamp
Hood down
until you hear a
“click.”
(back view)
F
Set Bowl into Base
(front view)
Check to be sure that Bowl is
securely seated on Air Coupling in Base.
Air Coupling
G
Moving Your AeroGarden
Use one hand to
grasp
Lamp Arm
Gently slide AeroGarden
toward the surface edge and
place other hand under
.
Base
.
6
NEED ADDITIONAL HELP?
For supplies and information, visit…
www.aerogardensupport.com
3
H
Place Your Garden
In: A 60-75°F
(16-24°C)
environment
(optimal)
On: A sturdy, watertolerant surface
(Metal surfaces may cause
noise due to vibration)
Under: A space that
allows 22” (56cm)
clearance for the full
height of raised lamp
Away From
Near: A standard
electrical outlet, per
local regulations
68°F/20°C
Note: Do not place beneath
under-cabinet lights.
Reach of children and pets
Direct sources of heat (e.g., stove, furnace vents)
Direct sources of cold air (e.g., window drafts, A/C vents)
For Optimal Tending & Harvesting, Also Consider
Easy access to un-softened water
4
Loading...