S62900KSS0 |
EN |
REFRIGERATOR |
USER MANUAL |
2 |
S62900KSW0 |
PT |
FRIGORÍFICO |
MANUAL DE INSTRUÇÕES |
18 |
|
ES |
FRIGORÍFICO |
MANUAL DE INSTRUCCIONES |
35 |
2
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
Visit the webshop at:
www.aeg-electrolux.com/shop
Contents 3
CONTENTS
4 Safety information
6 Control panel
9 First use
10 Daily use
10 Helpful hints and tips
11 Care and Cleaning
12 What to do if…
14 Technical data
14 Installation
17 Environmental concerns
The following symbols are used in this user manual:
Important information concerning your personal safety and information on how to avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice
4 Safety information
SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.
Children and vulnerable people safety
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
•Keep all packaging well away from children. There is risk of suffocation.
•If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it.
•If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
CAUTION!
Keep ventilation openings clear of obstruction.
•The appliance is intended for keeping foodstuff and/or beverages in a normal household as explained in this instruction booklet.
•Do not use a mechanical device or any artificial means to speed up the thawing process.
•Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer.
•Do not damage the refrigerant circuit.
•The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.
During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
–avoid open flames and sources of ignition
–thoroughly ventilate the room in which the appliance is situated
Safety information |
5 |
|
|
•It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock.
WARNING!
Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
1.Power cord must not be lengthened.
2.Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire.
3.Make sure that you can come to the mains plug of the appliance.
4.Do not pull the mains cable.
5.If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
6.You must not operate the appliance without the lamp cover1) of interior lighting.
•This appliance is heavy. Care should be taken when moving it.
•Do not remove nor touch items from the freezer compartment if your hands are damp/ wet, as this could cause skin abrasions or frost/freezer burns.
•Avoid prolonged exposure of the appliance to direct sunlight.
•Bulb lamps2) used in this appliance are special purpose lamps selected for household appliances use only. They are not suitable for household room illumination.
Daily use
•Do not put hot pot on the plastic parts in the appliance.
•Do not store flammable gas and liquid in the appliance, because they may explode.
•Appliance's manufacturers storage recommendations should be strictly adhered to. Refer to relevant instructions.
Care and cleaning
•Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
•Do not clean the appliance with metal objects.
•Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance.
Installation
For electrical connection carefully follow the instructions given in specific paragraphs.
•Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
•It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
1)If the lamp cover is foreseen.
2)If the lamp is foreseen.
6Control panel
•Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.
•Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn.
•The appliance must not be located close to radiators or cookers.
•Make sure that the mains plug is accessible after the installation of the appliance.
•Connect to potable water supply only. 3)
Service
•Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.
•This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The materials used on this appliance marked by the symbol 
are recyclable.
CONTROL PANEL
1 |
|
2 |
|
3 |
|
4 |
|
5 |
|
6 |
1ON/OFF button
2Mode button
3OK button
4Temperature colder button
5Temperature warmer button
6Display
It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds. Change is reversible.
3) If a water connection is foreseen.
Control panel |
7 |
|
|
Display
7
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
2 |
|
3 |
|
4 |
|
|
|
|
6 |
|
|||||||||
1Timer function
2COOLMATIC function
3Minute Minder function
4Child Lock function
5Alarm indicator
6Temperature indicator
7Holiday function
Switching on
To switch on the appliance do these steps:
1.Connect the mains plug to the power socket.
2.Press the ON/OFF button if the display is off.
3.The alarm buzzer could operate after few seconds. To reset the alarm refer to "High temperature alarm".
4.The temperature indicators show the set default temperature.
To select a different set temperature refer to "Temperature regulation".
Switching off
To switch off the appliance do these steps:
1.Press the ON/OFF button for 5 seconds.
2.The display switches off.
3.To disconnect the appliance from the power disconnect the mains plug from the power socket.
Temperature regulation
The set temperature of the fridge may be adjusted by pressing the temperature button. Set default temperature:
• +5°C for the fridge
The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours.
After a power failure the set temperature remains stored.
Minute Minder function
The Minute Minder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down a mixture for a certain lenght of time.
8 Control panel
To switch on the function:
1.Press the Mode button until the corresponding icon appears. The Minute Minder indicator flashes.
The Timer shows the set value (30 minutes) for a few seconds.
2.Press the Timer regulator button to change the Timer set value from 1 to 90 minutes.
3.Press the OK button to confirm.
The Minute Minder indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Minute Minder indicator flashes and an audible alarm sounds:
1. Switch off the function. To switch off the function:
1.Press the Mode button until the Minute Minder indicator flashes.
2.Press the OK button to confirm.
3.The Minute Minder indicator goes off.
It is possible to deactivate the function at any time.
It is possible to change the time at any time and before the end by pressing the Temperature colder button and the Temperature warmer button.
Child Lock function
To lock the buttons from unintentional operation select the Child Lock function. To switch on the function:
1.Press the Mode button until the corresponding icon appears.
2.The Child Lock indicator flashes.
3.Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.Press the Mode button until the Child Lock indicator flashes.
2.Press the OK button to confirm.
3.The Child Lock indicator goes off.
COOLMATIC function
If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.
To switch on the function:
1.Press the Mode button until the corresponding icon appears. The COOLMATIC indicator flashes.
The fridge temperature indicator shows the set temperature of +2°C .
2.Press the OK button to confirm.
The COOLMATIC indicator is shown.
The COOLMATIC function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end:
First use |
9 |
|
|
1.Press the Mode button until the COOLMATIC indicator flashes.
2.Press the OK button to confirm.
3.The COOLMATIC indicator goes off.
The function switches off by selecting a different fridge set temperature.
Holiday function
This function allows you to keep the refrigerator closed and empty during a long holiday period without the formation of a bad smell.
The fridge compartment must be empty with holiday function on.
To switch on the function:
1.Press the Mode button until the corresponding icon appears. The Holiday indicator flashes.
The fridge temperature indicator shows the set temperature.
2.Press the OK button to confirm.
The Holiday indicator is shown.
To switch off the function:
1.Press the Mode button until the Holiday indicator flashes.
2.Press the OK button to confirm.
3.The Holiday indicator goes off.
The function switches off by selecting a different fridge set temperature.
Door open alarm
An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by:
•flashing Alarm indicator
•acoustic buzzer
When normal conditions are restored (door closed), the alarm will stop. During the alarm, the buzzer can be switched off by pressing any button.
FIRST USE
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
10 Daily use
DAILY USE
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at different heights.
HELPFUL HINTS AND TIPS
Hints for energy saving
•Do not open the door frequently or leave it open longer than absolutely necessary.
•If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
•do not store warm food or evaporating liquids in the refrigerator
•do cover or wrap the food, particularly if it has a strong flavour
•position food so that air can circulate freely around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable drawer.
For safety, store in this way only one or two days at the most.
Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf.
Care and Cleaning 11
Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s) provided.
Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.
CARE AND CLEANING
CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
•clean the inside and accessories with lukewarm water and some neutral soap.
•regularly check the door seals and wipe clean to ensure they are clean and free from debris.
•rinse and dry thoroughly.
Do not pull, move or damage any pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This operation will improve the performance of the appliance and save electricity consumption.
Take care of not to damage the cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added.
After cleaning, reconnect the equipment to the mains supply.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.
12 What to do if…
It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
•disconnect the appliance from electricity supply
•remove all food
•defrost4) and clean the appliance and all accessories
•leave the door/doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
WHAT TO DO IF…
WARNING!
Before troubleshooting, disconnect the mains plug from the mains socket.
Only a qualified electrician or competent person must do the troubleshooting that is not in this manual.
There are some sounds during normal use (compressor, refrigerant circulation).
Problem |
|
Possible cause |
|
Solution |
|
|
|
|
|
The appliance is noisy |
|
The appliance is not supported |
|
Check if the appliance stands sta- |
|
|
properly |
|
ble (all the four feet should be |
|
|
|
|
on the floor) |
|
|
|
|
|
The appliance does not op- |
|
The appliance is switched off. |
|
Switch on the appliance. |
erate. The lamp does not |
|
|
|
|
operate. |
|
|
|
|
|
|
The mains plug is not connec- |
|
Connect the mains plug to the |
|
|
ted to the mains socket correct- |
|
mains socket correctly. |
|
|
ly. |
|
|
|
|
|
|
|
4) If foreseen.
|
|
|
|
|
What to do if… |
|
13 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Problem |
|
Possible cause |
|
Solution |
|
|
|
|
|
|
|
|
|
|
|
|
|
The appliance has no power. |
|
Connect a different electrical ap- |
||
|
|
|
There is no voltage in the mains |
|
pliance to the mains socket. |
|
|
|
|
|
socket. |
|
Contact a qualified electrician. |
||
|
|
|
|
|
|
|
|
|
The lamp does not work. |
|
The lamp is in stand-by. |
|
Close and open the door. |
|
|
|
|
|
|
|
|
|
|
|
|
|
The lamp is defective. |
|
Refer to "Replacing the lamp". |
||
|
The compressor operates |
|
The temperature is not set cor- |
|
Set a higher temperature. |
|
|
|
continually. |
|
rectly. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The door is not closed correctly. |
|
Refer to "Closing the door". |
|
|
|
|
|
|
|
|
|
|
|
|
|
The door has been opened too |
|
Do not keep the door open lon- |
||
|
|
|
frequently. |
|
ger than necessary. |
|
|
|
|
|
|
|
|
|
|
|
|
|
The product temperature is too |
|
Let the product temperature de- |
||
|
|
|
high. |
|
crease to room temperature be- |
||
|
|
|
|
|
fore storage. |
|
|
|
|
|
|
|
|
|
|
|
|
|
The room temperature is too |
|
Decrease the room temperature. |
||
|
|
|
high. |
|
|
|
|
|
|
|
|
|
|
|
|
|
The compressor does not |
|
This is normal, no error has oc- |
|
The compressor starts after a pe- |
||
|
start immediately after |
|
curred. |
|
riod of time. |
|
|
|
pressing the COOLMATIC |
|
|
|
|
|
|
|
switch, or after changing |
|
|
|
|
|
|
|
the temperature. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water flows on the rear |
|
During the automatic defrost- |
|
This is correct. |
|
|
|
plate of the refrigerator. |
|
ing process, frost defrosts on |
|
|
|
|
|
|
|
the rear plate. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Water flows into the re- |
|
The water outlet is clogged. |
|
Clean the water outlet. |
|
|
|
frigerator. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Products prevent that water |
|
Make sure that products do not |
||
|
|
|
flows into the water collector. |
|
touch the rear plate. |
|
|
|
|
|
|
|
|
|
|
|
Temperature cannot be |
|
COOLMATIC function switched |
|
Switch off COOLMATIC manually, |
||
|
set . |
|
on. |
|
or wait to set the temperature |
||
|
|
|
|
|
until the function has reset auto- |
||
|
|
|
|
|
matically. Refer to "COOLMATIC |
||
|
|
|
|
|
function".. |
|
|
|
|
|
|
|
|
|
|
|
The temperature in the ap- |
|
The temperature regulator is |
|
Set a higher/lower temperature. |
||
|
pliance is too low/high. |
|
not set correctly. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The door is not closed correctly. |
|
Refer to "Closing the door". |
|
|
|
|
|
|
|
|
|
|
|
|
|
The product temperature is too |
|
Let the product temperature de- |
||
|
|
|
high. |
|
crease to room temperature be- |
||
|
|
|
|
|
fore storage. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Many products are stored at |
|
Store less products at the same |
||
|
|
|
the same time. |
|
time. |
|
|
|
|
|
|
|
|||
|
The temperature in the re- |
|
There is no cold air circulation |
|
Make sure that there is cold air |
||
|
frigerator is too high. |
|
in the appliance. |
|
circulation in the appliance. |
|
|
|
|
|
|
|
|
|
|
14 Technical data
Replacing the lamp
1.Switch off the appliance.
2.Press on the rear hook and at the same
time slide the cover in the direction of the arrow.
3. Replace the lamp with one of the same power and specifically designed for household appliances. (the maximum power is shown on the lamp cover).
4. Install the lamp cover by sliding it into its original position.
5.Switch on the appliance.
6.Open the door. Make sure that the light comes on.
Closing the door
1.Clean the door gaskets.
2.If necessary, adjust the door. Refer to "Installation".
3.If necessary, replace the defective door gaskets. Contact the Service Center.
TECHNICAL DATA
|
|
|
|
|
|
|
|
Dimension of the recess |
|
|
|
|
|
|
|
|
|
Height |
1600 mm |
|
|
|
|
|
|
Width |
600 mm |
|
|
|
|
|
|
Depth |
630 mm |
|
|
|
|
The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
INSTALLATION
WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below over-
Installation 15
hanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet.
If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be removed.
WARNING!
It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.
100mm |
|
10mm |
10mm |
Positioning
WARNING!
If you are discarding an old appliance that has a lock or catch on the door, you must ensure that it is made unusable to prevent young children being trapped inside.
The appliance shall have the plug accessible after installation.
Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance:
Climate class |
|
Ambient temperature |
|
|
|
SN |
|
+10°C to + 32°C |
|
|
|
N |
|
+16°C to + 32°C |
ST |
|
+16°C to + 38°C |
|
|
|
T |
|
+16°C to + 43°C |
|
|
|
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appli-
16 Installation
ance to a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
Rear spacers
Inside the appliance you find two spacers which must be fitted as shown in the figure.
Slacken the screws and insert the spacer under the screw head, then retighten the screws.
Door reversibility
WARNING!
Before carrying out any operations, remove the plug from the power socket.
To change the opening direction of the door, do these steps:
1. Remove the clip-in plinth (D). Remove the bottom hinge (E) by unscrewing
the fixing screws.
E
F
F
D
|
|
Environmental concerns |
17 |
2. |
Remove the door from the pin (G). Un- |
|
|
|
screw the pin (G) and screw it on the |
|
|
|
opposite side. |
|
|
3. |
Remove the cover from the top of the |
|
|
|
door and position it on the opposite |
|
|
|
side. side. |
|
|
4. |
Refit the door. |
|
G |
5. |
Fix the bottom hinge (E) on the oppo- |
|
|
|
site side, using the screws previously re- |
|
|
|
moved. |
|
|
6. |
Remove the cover (F) from the plinth |
|
|
|
(D) by pushing it in the direction of the |
|
|
|
arrow and install it on the opposite side. |
|
|
7. |
Install the plinth (D), clipping it into |
|
|
|
place. |
|
|
8. |
Unscrew the handle. Remove the plug |
|
|
|
with a punch. Install the handle and |
180° |
|
|
the plug on opposite side. Take from |
|
|
|
|
|
|
|
the accessory bag the two plugs and |
|
|
|
cover the holes left open after having |
|
|
|
removed the handle. |
|
|
9. Make sure that the front board of the door is parallel to the front board of the top.
10. Reposition, level the appliance, wait for at least four hours and then connect it to the power socket.
Do a final check to make sure that:
•All screws are tightened.
•The magnetic seal adheres to the cabinet.
•The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.
ENVIRONMENTAL CONCERNS
The symbol 
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
Loading...