AEG-Electrolux ERC34393W User Manual

user manual
Fridge
ERC34393W
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2 Control panel 4 First use 4 Daily use 5 Helpful hints and tips 5
SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing and first us­ing the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and acci­dents, it is important to ensure that all peo­ple using the appliance are thoroughly famil­iar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for dam­ages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, un­less they have been given supervision or instruction concerning use of the appli­ance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from chil­dren. There is risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the con­nection cable (as close to the appliance as you can) and remove the door to pre­vent playing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door seals is to replace an older appliance hav­ing a spring lock (latch) on the door or lid,
Care and Cleaning 6 What to do if… 6 Technical data 8 Installation 8 Environmental concerns 11
Subject to change without notice
be sure to make that spring lock unusa­ble before you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
Caution! Keep ventilation openings
clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household as explained in this instruction booklet.
• Do not use a mechanical device or any ar­tificial means to speed up the thawing process.
• Do not use other electrical appliances (such as ice cream makers) inside of re­frigerating appliances, unless they are ap­proved for this purpose by the manufac­turer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is con­tained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit be­come damaged. If the refrigerant circuit should become damaged: – avoid open flames and sources of igni-
tion
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications or modify this product in any way. Any
electrolux 3
damage to the cord may cause a short­circuit, fire and/or electric shock.
Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or dam­aged power plug may overheat and cause a fire.
3. Make sure that you can come to the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the lamp cover
1)
of interior
lighting.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abra­sions or frost/freezer burns.
• Avoid prolonged exposure of the appli­ance to direct sunlight.
Bulb lamps
2)
used in this appliance are special purpose lamps selected for house­hold appliances use only. They are not suitable for household room illumination.
Daily Use
• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appliance, because they may explode.
• Do not place food products directly against the air outlet on the rear wall.
3)
• Frozen food must not be re-frozen once it has been thawed out.
• Store pre-packed frozen food in accord­ance with the frozen food manufacturer's instructions.
• Appliance's manufacturers storage rec­ommendations should be strictly adhered to. Refer to relevant instructions.
1) If the lamp cover is foreseen
2) If the lamp is foreseen
3) If the appliance is Frost Free
• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if con­sumed straight from the appliance.
Care and cleaning
• Before maintenance, switch off the appli­ance and disconnect the mains plug from the mains socket.
• Do not clean the appliance with metal ob­jects.
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
• Regularly examine the drain in the refriger­ator for defrosted water. If necessary, clean the drain. If the drain is blocked, wa­ter will collect in the bottom of the appli­ance.
Installation
Important! For electrical connection
carefully follow the instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it. Do not connect the ap­pliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ven­tilation follow the instructions relevant to installation.
• Wherever possible the back of the prod­uct should be against a wall to avoid touching or catching warm parts (com­pressor, condenser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessi­ble after the installation of the appliance.
Connect to potable water supply only.
4)
4 electrolux
Service
• Any electrical work required to do the serv­icing of the appliance should be carried out by a qualified electrician or compe­tent person.
• This product must be serviced by an au­thorized Service Centre, and only genu­ine spare parts must be used.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer,
CONTROL PANEL
1. Pilot light
2. Temperature regulator
Switching on
Insert the plug into the wall socket. Turn the Temperature setting regulator clockwise to a medium setting. The Pilot light will light up.
Switching off
To turn off the appliance, turn the thermo­stat knob to the "O" position.
Temperature regulation
The temperature is automatically regulated. To operate the appliance, proceed as fol­lows:
• turn the knob clockwise to obtain the max­imum coldness
• turn the knob counter- clockwise to ob­tain the minimum coldness.
in either its refrigerant circuit or insula­tion materials. The appliance shall not be discarded together with the urban re­fuse and rubbish. The insulation foam contains flammable gases: the appli­ance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid dam­aging the cooling unit, especially at the rear near the heat exchanger. The ma­terials used on this appliance marked by the symbol
52
1 2
0
6
4
3
are recyclable.
1
The intermediate position is usually the most suitable. However, the exact setting should be chos­en keeping in mind that the temperature in­side the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.
FIRST USE
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accesso­ries with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.
4) If a water connection is foreseen
Important! Do not use detergents or abra­sive powders, as these will damage the fin­ish.
DAILY USE
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
Positioning the door shelves
To permit storage of food packages of vari­ous sizes, the door shelves can be placed at different heights.
electrolux 5
To make these adjustments proceed as fol­lows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
HELPFUL HINTS AND TIPS
Hints for energy saving
• Do not open the door frequently or leave it open longer than absolutely necessary.
• If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loa­ded, the compressor may run continuous­ly, causing frost or ice on the evaporator. If this happens, set the Temperature Reg­ulator toward warmer settings to allow au­tomatic defrosting and so a saving in elec­tricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liq­uids in the refrigerator
• do cover or wrap the food, particularly if it has a strong flavour
• position food so that air can circulate free­ly around it
Hints for refrigeration
Useful hints: Meat (all types) : wrap in polythene bags and place on the glass shelf above the veg­etable drawer. For safety, store in this way only one or two days at the most. Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf. Fruit and vegetables: these should be thor­oughly cleaned and placed in the special drawer(s) provided. Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.
6 electrolux
CARE AND CLEANING
Caution! Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and re­charging must therefore only be carried out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with luke­warm water and some neutral soap.
• regularly check the door seals and wipe clean to ensure they are clean and free from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will dam­age the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This op­eration will improve the performance of the appliance and save electricity consumption.
Important! Take care of not to damage the cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer cas­ing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, dur-
ing normal use. The defrost water drains out through a trough into a special contain­er at the back of the appliance, over the mo­tor compressor, where it evaporates. It is important to periodically clean the de­frost water drain hole in the middle of the re­frigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provi­ded, which you will find already inserted in­to the drain hole.
Periods of non-operation
When the appliance is not in use for long pe­riods, take the following precautions:
disconnect the appliance from elec-
tricity supply
• remove all food
• leave the door/doors ajar to prevent un-
If the cabinet will be kept on, ask some­body to check it once in a while to prevent the food inside from spoiling in case of a power failure.
5)
defrost accessories
pleasant smells.
and clean the appliance and all
WHAT TO DO IF…
Warning! Before troubleshooting, disconnect the mains plug from the mains socket.
5) If foreseen.
Only a qualified electrician or compe­tent person must do the troubleshoot­ing that is not in this manual.
electrolux 7
Important! There are some sounds during normal use (compressor, refrigerant circulation).
Problem Possible cause Solution
The appliance does not operate. The lamp does not operate.
The mains plug is not connected
The appliance has no power.
The lamp does not work.
The lamp is defective. Refer to "Replacing the lamp".
The compressor oper­ates continually.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
The product temperature is too
The room temperature is too
Water flows on the rear plate of the refrigerator.
Water flows into the re­frigerator.
Products prevent that water
Water flows on the ground.
The temperature in the appliance is too low.
The temperature in the appliance is too high.
The door is not closed correctly. Refer to "Closing the door".
The product temperature is too
Many products are stored at the
There is no cold air circulation in
The appliance is switched off. Switch on the appliance.
to the mains socket correctly.
There is no voltage in the mains socket.
The lamp is in stand-by. Close and open the door.
The temperature is not set cor­rectly.
frequently.
high.
high.
During the automatic defrosting process, frost defrosts on the rear plate.
The water outlet is clogged. Clean the water outlet.
flows into the water collector.
The melting water outlet does not flow in the evaporative tray above the compressor.
The temperature regulator is not set correctly.
The temperature regulator is not set correctly.
high.
same time.
the appliance.
Connect the mains plug to the mains socket correctly.
Connect a different electrical appli­ance to the mains socket. Contact a qualified electrician.
Set a higher temperature.
Do not keep the door open longer than necessary.
Let the product temperature de­crease to room temperature be­fore storage.
Decrease the room temperature.
This is correct.
Make sure that products do not touch the rear plate.
Attach the melting water outlet to the evaporative tray.
Set a higher temperature.
Set a lower temperature.
Let the product temperature de­crease to room temperature be­fore storage.
Store less products at the same time.
Make sure that there is cold air cir­culation in the appliance.
8 electrolux
Replacing the bulb
If you want to replace the bulb, do these steps:
1. Break the circuit of the appliance.
2. Press on the rear hook and at the same
time slide the cover in the direction of the arrow.
3. Replace the bulb with one of the same
power and specifically designed for household appliances. the maximum power is shown on the light bulb cover)
4. Replace the light cover by sliding it into
its original position.
5. Reconnect the appliance.
6. Open the door and check if the light
comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In­stallation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.
TECHNICAL DATA
Dimension
Height 1600 mm
Width 600 mm
Depth 650 mm
The technical information are situated in the rating plate on the internal left side of the ap­pliance and in the energy label.
INSTALLATION
Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Location
The appliance should be installed well away from sources of heat such as radiators, boil­ers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabi­net. To ensure best performance, if the ap­pliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned be­low overhanging wall units. Accurate level-
ling is ensured by one or more adjustable feet at the base of the cabinet. If the cabinet is placed in a corner and the side with the hinges facing the wall, the dis­tance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be re­moved.
Warning! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.
electrolux 9
10mm 100mm
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate cor­respond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power sup­ply socket is not earthed, connect the appli­ance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not ob­served. This appliance complies with the E.E.C. Di­rectives.
Rear spacers Inside the appliance you find two
spacers which must be fitted as shown in the figure.
Slacken the screws and insert the spacer under the screw head, then retighten the screws.
10mm
Door reversibility
Before carrying out any operations, remove the plug from the power socket. To change the opening direction of the door, proceed as follows:
• To carry out the following operations, we
suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the opera­tions.
• Open the door with the appliance in the
upright position. Unscrew the screws and remove the upper door plastic trim.
• Remove the little plastic cover from the
door plastic trim and refit on the opposite side (d).
• Lay down the appliance back side down.
10 electrolux
d
d
• Remove the screw of the hinge cover plug (a) .
• Unscrew the upper hinge and remove it (b).
• Unscrew the screw and remove the door stopper (c).
b
c
a
e
2
1
5
f
4
3
• Lift up the appliance to vertical position.
• Open the door and reposition the upper door plastic trim with screws.
• Remove the door.
• Remove using a tool the cover (e), un­screw the lower hinge pivot (f) and place it on the opposite side.
• Re-insert the cover (e) on the opposite side.
• Re-insert the door .
• Pay attention that the front board of the doors are parallel to the front board of the top.
• Fix the door stopper on the opposite side.
• Position and fix the upper hinge (that can be found in the instruction for use bag) on the opposite side .
• Fix the screw of the new cover hinge (that can be found in the instruction for use bag).
• Fix the handle on the opposite side, in­sert the plastic plugs into the holes left open that can be found in the instruction for use bag.
Warning! Reposition, level the appliance, wait for at least four hours and then connect it to the power socket.
In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the re­versibility of the doors at your cost.
electrolux 11
Warning! After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit per­fectly to the cabinet. In that case, wait for the natural fitting of the gasket. Lay down the appliance back side down.
consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
www.electrolux.com/shop
212721421-00-12052010
Loading...