Thank you for choosing a first class
product from Electrolux, which hopefully
will provide you with lots of pleasure in
the future. The Electrolux ambition is to
offer a wide variety of quality products
that make your life more comfortable.
You will find some examples on the cover in this manual. Please take a few minutes to study this manual so that you
can take advantage of the benefits of
your new machine. We promise that it
will provide a superior User Experience
delivering Ease-of-Mind. Good luck!
electrolux 3
4 electrolux contents
T
1
Contents
Safety instructions5
Description of the Appliance7
Before Using for the first time14
Using the Oven17
Cleaning and Care53
What to do if …68
Installation Instructions69
Disposal74
Guarantee/Customer Service75
Index77
Service78
he following symbols are used in this user manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
3 General information and tips
2 Environmental information
Safety instructions
Electrical safety
• This appliance must be only connected by a registered electrician.
• In the event of a fault or damage to
the appliance: Take the fuses out or
switch off.
• Repairs to the appliance must only
be carried out by qualified service engineers. Considerable danger
may result from improper repairs. If
repairs become necessary, please
contact our Customer Services or
your dealer.
Child Safety
• Never leave children unsupervised
when the appliance is in use.
Safety whilst Using
• People (including children) who, because of their physical, sensory or
mental capabilities or their inexperience or ignorance are not able to use
the device safely, should not use this
device without supervision or instruction by a responsible person.
• This appliance is intended to be
used for cooking, roasting and baking food in the home.
• Take care when connecting electric
appliances to sockets nearby. Do
not allow connecting leads to come
into contact with or to catch beneath
the hot oven door.
safety instructions electrolux 5
• Warning: Risk of burns! The interi-
or of the oven becomes hot during
use.
• Using ingredients containing alcohol
in the oven may create an alcohol-air
mixture that is easily ignited. In this
case, open the door carefully. Do not
have embers, sparks or naked
flames in the vicinity when opening
the door.
Information on acrylamides
According to the latest scientific
knowledge, intensive browning of
food, especially in products containing starch, can constitute a
health risk due to acrylamides.
Therefore we recommend cooking
at the lowest possible temperatures
and not browning foods too much.
6 electrolux safety instructions
How to avoid damage to the
appliance
• Do not line the oven with aluminium
foil and do not place baking trays,
pots, etc. on the oven floor, as the
heat that builds up will damage the
oven enamel.
• Fruit juices dripping from the baking
tray will leave stains, which you will
not be able to remove. For very moist
cakes, use a deep tray.
• Do not put any strain on the oven
door when open.
• Never pour water directly into the
oven when it is hot. This could cause
damage to or discoloration of the
enamel.
• Rough handling, especially around
the edges of the front panel, can
cause the glass to break.
• Do not store any flammable materials inside the oven. These could ignite when the oven is switched on.
• Do not store any moist foods inside
the oven. This could damage the
oven enamel.
• After switching off the cooling fan, do
not keep uncovered dishes in the oven. Moisture may condense in the
oven interior or on the glass doors
and may get into the units.
Note on enamel coating
Changes in the colour of the oven’s
enamel coating as a result of use do not
affect the appliance’s suitability for normal and correct use. They therefore do
not constitute a defect in the sense of
the warranty law.
Description of the Appliance
General Overview
Oven displays
and Touch Control sensor fields
description of the appliance electrolux 7
Light bar
Door
handle
The oven switches off after 2 minutes, if no function is selected and is
changed at the oven nothing, the
light remains however on.
In order to switch off the light bar,
oven switch on with
and switch
off again.
Oven door
8 electrolux description of the appliance
The electronic oven controls
Indicators
Menu option symbol
(with oven shelf level)
Clock
Time functions
Heat indicator
Te mp er a tu r e
Weight
Symbols
Various symbols will now be shown in
the display depending on the selected
function.
description of the appliance electrolux 9
Symbol
Short timer4:30The short timer is active.
Time10:00Shows the set time.
Duration
End Time
Start0:45Shows when the cooking cycle started.
TemperatureShows the temperature the oven has reached.
Weight1.5 kgPossibilities:
Meatprobe
Heat+Hold
Odour filterThe odour filter is switched on.
Display
(examples)
1:00Shows the time required for the cooking cycle.
14:05Shows when the cooking cycle will finish.
End time calculated when
Quick heat is active (reduced heating-up time).
–
Automatic weight system is active.
–
Weight can be changed.
75°CPossibilities:
80°C
– Meatprobe
– Meatprobe Automatic
–
Core temperature can be changed.
Heat+Hold
Function
Meatprobe
is inserted.
is active.
is activated.
is inserted.
10 electrolux description of the appliance
Touch Control sensor fields
The appliance is operated using Touch
Control sensor fields. You control the
functions by touching the sensor fields.
When you are using the controls
make sure that you only touch one
sensor field. If your finger is applied
too flat, a neighbouring sensor field
could be touched as well.
On/Off
Scroll
Main menu
Set values
Select
options
Confirm
description of the appliance electrolux 11
Sensor
field
, To move down and up in the
menu.
To display main menu.Functions set switch off
To co n fir m.
To switch appliance on or off.
To select time functions, addi-
tional functions and
probe
, To set values (e.g. temperature,
time, weight, degree of cooking).
FunctionComment
Meat-
.
When a function is active:
•
Press once: Change to the higher menu
(function remains active), after 5 seconds
move again into the active menu option
•
Press twice: Up and down in the higher
menu (function switches off)
(except for countdown timer).
•
To activate value:
–
Press once: Present symbol flashes
–
Press twice: Value can be set
•
To s e t va lues :
–
Press once: To set value in single steps
–
Hold down key: To set value in fast steps
•
When setting a cook time or time the display can be re-set to zero if and are
pressed at the same time.
12 electrolux description of the appliance
Oven Features
Top heat and heating elements
Smell Filter
Shelf positions
Oven shelf runners,
removable
Inside of door
On the inside of the oven door you will
find the numbers of the different oven
shelves.
You will also find some brief information
about the oven's functions, recommended shelves and temperatures for
cooking the most popular dishes.
Oven lighting
Meat probe socket
Fat Filter
Oven lighting
Fan heating element
Fan
Bottom Heat
Oven accessories
Oven shelf
For cookware, cake tins, roasts and
grilled foods.
Baking tray
For cakes and biscuits.
Roasting Pan
For baking and roasting or as a pan for
collecting fat.
description of the appliance electrolux 13
Meat probe
For determining exactly how far joints of
meat are cooked.
14 electrolux before using for the first time
Before Using for the first time
If you would like to change one of
these base settings at a later date,
please refer to the chapter Basic
Settings.
Setting the language
1. When the appliance has been connected to the electrical supply, the
following is shown in the display.
– the company logo
– the version of the software and the
period of operation
– the message ”Set language”
2. Using or , select the desired lan-
guage.
3. Confirm selected language with .
From now on the texts in the display
appear in the language set.
Setting contrast and brightness
After you have set the language, the
messages “Set contrast” and “Set
brightness” are displayed.
The contrast and the brightness are
set according to the language set
(see section “Setting language”)
Setting the clock
After you have set the contrast and the
brightness, the message ”Set Time of
Day” is displayed.
4. Using or set the hour of the cur-
rent time.
5. Confirm with .
6. Using or set the minutes of the
current time.
7. Confirm with .
The appliance is now ready to use.
The time only has to be set if the appliance is disconnected from the
power supply for a long time.
before using for the first time electrolux 15
16 electrolux before using for the first time
Initial cleaning
Clean the oven before using it for the
first time.
Important: Do not use caustic or
abrasive cleaning agents! These
can damage the oven surfaces.
For the metal surfaces, use commercially available cleaning agents.
1. Open the oven door.
The oven light is lit.
2. Remove all oven accessories, and
clean them with warm water and a
scouring agent.
3. Wash the oven in the same way, and
wipe dry.
4. Wipe the front of the appliance with
a damp cloth.
Using the Oven
The menus in overview
Main menuSub-menu
Assisted CookingPork/Veal
Heating FunctionsFan Cooking
Cleaning MenuPyrolytic
My Programmes1- My Program
using the oven electrolux 17
Beef/Game/Lamb
Poultry
Fish
Cake
Pizza/Pie/Bread
Casseroles/Gratins
Convenience
Specials
Time Indication
Set+Go
Heat+Hold
Time Extension
Display Contrast
Display Brightness
Set language
Buzzer Volume
Key Tones
Alarm/Error Tones
Smell Filter
Service
Factory Settings
Operation of the menus
Example
1. Switch the appliance on with .
You will find yourself in the main
menu.
2. With or select the desired main
menu.
3. Use to move to the appropriated
sub-menus.
The sub-menu selected is displayed.
At every point you can get back to
the the main menu with .
At the end of most menus there is
the menu option Back.
You use this to go back to the higher
menu.
using the oven electrolux 19
You can cancel a procedure by
pressing .
Then you will find yourself back in
the main menu.
Cooling fan
The fan switches on automatically
in order to keep the appliance’s surfaces cool. When the oven is
switched off, the fan continues to
run to cool the appliance down, then
switches itself off automatically.
20 electrolux using the oven
Heat indicator
Heating up indicator
When an oven function has been
switched on the bar that keeps getting
longer indicates how far the oven has
heated up.
Fast heating indicator
With some oven functions the heating
up time is shortened by the automatic
function Fast heating.
Until the set temperature is reached, a
stiped bar goes from left to right in the
heat indicator.
Residual heat indicator
After switching off the oven, the resid-
ual heat is displayed.
Displaying temperature to the degree
The temperature is displayed to the degree instead of the bar of the heating up
indicator for 5 seconds during the heating up time.
1. Press and at the same time.
When the temperature set is
reached, an audible signal sounds.
Inserting the Oven Shelf and Roasting Pan
Inserting the roasting pan:
Insert the roasting pan on the telescopic
runners of the selected oven level so
that the two holes engage on the front
retaining pins on the telescopic runners.
Inserting the oven shelf:
Insert the oven shelf so that the feet
point downwards.
Insert the oven shelf on the telescopic
runners of the selected oven level.
The high rim around the oven shelf is an
additional device to prevent cookware
from slipping.
using the oven electrolux 21
Inserting the oven shelf and roasting pan together:
Lay the oven shelf on the roasting pan.
Insert the oven shelf and the roasting
pan on the telescopic runners of the selected oven level so that the two holes of
the roasting pan engage on the front retaining pins on the telescopic runners.
22 electrolux using the oven
To make it easier to insert the insertable component when runners are
extended to different extents, lay
the insertable component onto the
runners at the back, push it in as far
as the stop and then lower it onto
the retaining pins at the front.
Inserting/Removing the Grease Filter
Only use the grease filter when
roasting to protect the rear heating ele-
ments from fat splashes.
Inserting the grease filter
Hold the grease filter by the grip and
insert the two mounts downwards into
the opening on the rear wall of the
oven (fan opening).
Taking out the grease filter
Hold the grease filter by the grip and
unhook it.
The menu Assisted Cooking
The Assisted Cooking in overview
The dishes in the Kitchen Assistant (except for Specials) are prepared with automatic systems.
The automatic systems offer the optimum settings (oven functions, temperature, cook time) for the respective dish.
CategoryDish
Pork/VealRoast pork Knuckle of veal
Pork loin Ossobuco
Pork hock Stuffed breast of veal
Pork shoulder Meatloaf
Roast veal
Beef/Game/LambRoast beef/sirloin Roast hare
Scandinavian beef Rabbit in mustard
Roast beef Wild boar
Marinated beefRoast lamb
Saddle of venison Loin of lamb (medium rare)
using the oven electrolux 23
Roast venison Leg of lamb
PoultryWhole chicken Chicken drumsticks
Whole turkey Coq au vin
Whole duck Duck á l’orange
Whole goose Stuffed chicken
Turkey breast
FishWhole fish Stuffed calamari
Fish fillet Steamed fish
Stockfish Fish casserole
Fish in salt crust
24 electrolux using the oven
CategoryDish
CakeLemon cake Ring cake
Pizza/Pie/BreadTray pizza Quark turnovers
Casseroles/GratinsLasagne Pasta bake
Swedish cake Savarin cake
Sponge base Brownies
Cheesecake Muffins
Fruit cake Tart (sweet)
Streusel cake Carrot cake
Butterzopf Almond cake
Yeast cake Fruit tart
Onion tart White bread
Quiche Lorraine German farmhouse bread
Goat’s cheese tart Pierogi cake
Cheese flan
Cannelloni Chicory au gratin
Potato gratin Casserole
Moussaka Cabbage casserole
ConveniencePizza, frozen Bread/rolls
American pizza, frozen Bread/rolls, frozen
Pizza, chilled Apple strudel, frozen
Pizza snacks, frozen Fish fillet, frozen
French fries Chicken wings
Croquettes Lasagne/cannelloni
Hash browns
SpecialsDefrostPreserving
DryingPlate Warming
Keep Warm
You will find practical information
on the various automatic systems,
recipes and oven functions in the
accompanying booklet.
Operation of the Assisted Cooking
Assisted Cooking with Weight Automatic
The roasting time is automatically determined by inputting the weight.
Example
1. Using or select the menu option
Assisted Cooking, the desired category and the dish.
2. Confirm each one with .
3. Using or select Weight Auto-
matic.
4. Confirm with
5. Using or set the weight of the
food.
The setting changes in 0.2 kg steps.
The automatic programme is started.
As soon as the automatic programme
has finished, an audible signal sounds.
6. Press any key to switch off the signal.
using the oven electrolux 25
If the suggested weight is not
changed within approx. 5 seconds,
the programme starts automatically.
The weight can be altered at any time.
With all poultry programmes turn
the food after 30 minutes.
A reminder is displayed.
Assisted Cooking with Meatprobe
Automatic
The oven switches itself off automatically when the pre-set core temperature
set is reached.
26 electrolux using the oven
Important: Only the Meatprobe supplied may be used. If replacing,
please use only original replacement parts.
Example
1. Switch the appliance on using .
2. Using or select the menu option
Assisted Cooking, the desired category and the dish.
3. Confirm each one using .
4. Using or select Meatprobe Au-
tomatic.
5. Confirm with .
Message appears telling you to insert
the Meatprobe.
6. Insert Meatprobe (see section Meatprobe).
7. The automatic programme is started.
As soon as the automatic programme
has finished, an audible signal sounds.
8. Press any key to switch off the signal.
9. Remove Meatprobe.
Within a few minutes a provisional
end time at which the set core temperature will be reached is calculated. This time is constantly
recalculated and updated in the display. The system requires that the
Meatprobe is pushed into the meat
and into the socket at the beginning
of the cooking process and that it is
not removed during the cooking
process.
Warning: The Meatprobe is hot!
There is a risk of being burned when
removing the plug and the tip of the
meat probe.
Assisted Cooking with Recipe Automatic
All settings are fixed and cannot be
changed.
Example
1. Using or select the menu option
Assisted Cooking, the desired category and the dish.
2. Confirm each one with .
3. Using or select Recipe Auto-
matic .
4. Confirm with .
The automatic programme is started.
As soon as the automatic programme
has finished, an audible signal sounds.
5. Press any key to switch off the signal.
using the oven electrolux 27
28 electrolux using the oven
Manual
With Manual the optimum settings (oven
function and temperature) for the respective dish are taken, but you can
change them.
This may be the case if you don’t want
to use the Meatprobe,you don’t know
the weight of your food or have your
own recipe.
Example
1. Using or select the menu option
Assisted Cooking, the desired category and the dish.
2. Confirm each one with .
3. Using or select Manual.
4. Confirm with .
You are now in the corresponding oven
function and can carry out the setting
you want (see section “Operating the
oven functions”).
The Oven Functions menu
The oven functions in overview
Using the oven functions you can set
baking and roasting sessions to suit
your requirements.
Oven functionApplication
using the oven electrolux 29
Fan Cooking
Conventional
Cooking
Pizza Setting
Tur b o Gr i ll
Economy Grill
Dual Grill
Bottom Heat
Slow Cook
For
For preparing especially tender, succulent roasts.
For
baking
on
Set the oven temperatures
20-40 °C lower than when using Conventional.
For
baking
For baking on one oven level dishes that require
sive browning and a crispy base
Set the oven temperatures 20-40 °C lower than when using
Conventional.
For
roasting
The function is also suitable for
For
grilling
and for
grilling
.
ing
For
baking
up to three oven levels
and
roasting
larger joints of meat or poultry on one level.
flat foodstuffs placed in the
toasting
.
flat foodstuffs in
cakes with
on
one oven level
gratinating
large quantities
crispy or crusty bases
at the same time.
.
.
more inten-
and
browning
middle of the grill
and for
.
toast-
.
30 electrolux using the oven
Operating the oven functions
Example
1. Switch the appliance on with .
2. Using or select the menu option
oven function.
3. Confirm with .
4. Using or select oven function
Fan Cooking.
5. Confirm with .
6. Using or set the desired temper-
ature.
7. Confirm with or wait 5 seconds.
The oven starts to heat up.
When the temperature set is reached,
an acoustic signal sounds.
The oven is starting to heat up if
• the symbol for the oven function is
animated.
• the oven light is switched on.
• the corresponding heating element
(e.g. fan) is switched on.
Besides the temperature other
functions can be set using
(see section Additional functions).
The menu My Programmes
My Programmes in overview
Sub menuDescription
using the oven electrolux 31
1- My Program
2- My Program
...
Edit Programme NameTo rename stored programmes.
To save optimum settings for your own recipes.
You can store 20 programmes.
Operation of My Programmes
Storing a programme
1. Select oven function or Assisted
Cooking with the desired settings.
2. During or after the oven function or
the Assisted Cookingpress key
repeatedly until the ”SAVE” window
appears.
3. Confirm using the key.
The next free memory position is displayed.
4. Confirm using the key.
5. You can now write the name of your
programme.
The first letter flashes.
6. Using or select the desired letter
in alphabetical order.
7. Using or move the writing mark
to the right or left.
The next letter flashes and can be
changed, and so on.
32 electrolux using the oven
8. Confirm with when you have written your programme name.
Your programme is stored.
Memory positions that are already
filled can be overwritten at any time.
Instead of the suggested free memory position, with or select the
programme that you would like to
overwrite.
2Programmes can be renamed at
any time in the menu ”Edit Programme Name”.
Calling up a programme
1. Switch the appliance on with .
2. Using the arrow keys or select
the menu option My Programmes.
3. Confirm with .
4. Using the direction keys or se-
lect the stored programme.
5. Confirm with .
The stored programme with its settings
starts.
If no programmes have been stored,
a message appears to say how programmes are stored.
The cleaning menu
Cleaning in overview
Sub-menuDescription
PyrolyticClean oven using Pyrolytic.
Cleaning AssistantReminds you what you need to remember during Pyrolytic
before the Pyrolyticprocess starts.
The Cleaning Assistantcan be switched on or off.
Cleaning ReminderRecognises when Pyrolyticis required and alerts the user to
this fact.
The Cleaning Remindercan be switched on or off.
For instructions on how to operate
Pyrolyticand the Cleaning Assist-
antand switch the Cleaning Reminderon/off, please refer to the
section on cleaning and care.
using the oven electrolux 33
34 electrolux using the oven
The menu Basic Settings
The Basic Settings in overview
You can change certain basic settings regardless of the task the
oven is performing.
The settings can only be changed if
no oven function is selected.
SettingDisplayDescription
Set Time of Day12:15Set the current time on the clock.
Time Indication
–
OnTime is shown when appliance is switched off.
–
Off
Set+Go
Heat+Hold
Time Extension
Display Contrast1 ..... 10Adjust display contrast by degrees.
Display Brightness1 ..... 10Adjust display brightness by degrees.
Set language
Buzzer Volume1 ..... 10Adjust volume of touch-tones and signals by de-
Key Tones
Alarm/Error Tones
Smell Filter
–
OnSet+Go function is shown in the Select Options
–
OffSet+Go function is not shown in the Select Op-
–
OnHeat+Hold function is shown in the Select Options
–
OffHeat+Hold function is not shown in the Select Op-
–
On
–
Off
–
English
–
....
–
On
–
Off
–
On
–
Off
–
On
–
Off
Time is not shown when appliance is switched off,
because display is switched off completely to save
energy.
window and can be activated.
tions window.
window and can be activated.
tions window.
Switch Time Extension function on/off.
Select and set language for display.
grees.
Touch-tones confirm each time a key is pressed by
emitting a sound. Switch touch-tones on/off.
Alarm tones sound if a step cannot be carried out.
Switch alarm tones on/off.
Smell Filter on/off.
using the oven electrolux 35
SettingDisplayDescription
ServiceECAIA207
V03IA003
24
Factory SettingsReset all settings to factory settings (including My
Shows the software version and configuration.
Programmes).
Between 22:00 and 6:00 the display reduces its brightness when the appliance
is switched off to save energy.
Operation of the Basic Settings
Example
1. Using or select the menu option
Basic Settings.
2. Confirm with .
3. Using or go to the setting that
you want to adjust.
4. Confirm with .
The value currently set appears in
the display.
5. Using or select the desired val-
ue.
6. Confirm with .
The setting is changed.
36 electrolux using the oven
Everyday use of Basic Settings
Set+Go
The function Set+Go means you can set
all settings for an oven function and then
start it later.
Example application:
You prepare a dish in the morning and
enter all necessary settings in the oven.
Your child comes home at lunchtime,
puts the dish in the oven, presses any
key and the oven starts with your settings.
Condition:
• Fixed switch-Duration
To s wi t ch on Se t +G o
1. Select oven function with desired
settings.
2. Press key repeatedly until the
”Set+Go” window appears.
3. Confirm with .
The function Set+Go is now
switched on.
To start Set+Go
1. Press any key (except ).
Selected oven function starts.
As soon as the oven function is completed, a signal sounds.
2. Press any key to switch off the signal.
While the selected oven function
with is operating Set+Go, the Key
Lock is active (see section Key
Lock).
Set+Go can be activated or deactivated in the Basic Settings menu.
Heat+Hold
The function Heat+Hold keeps your prepared dish warm for 30 minutes, after
the baking or roasting has ended.
This is helpful, for example, when your
guests are late.
Condition for Heat+Hold:
• Fixed temperatur is above 80°C
• Fixed switch-Duration
using the oven electrolux 37
38 electrolux using the oven
To s wi t ch on He a t+ Hol d
1. Select oven function.
2. Press key repeatedly until the
”Heat+Hold” window appears.
3. Confirm with .
The function Heat+Hold is now
switched on.
4. As soon as the oven function is completed, a signal sounds and
Heat+Hold starts.
The oven function runs at 80°C for 30
minutes.
As soon as the 30 minutes with
Heat+Hold are over, the oven switches
itself off.
Irrespective of the oven function set
Heat+Hold remains active. You can
move between the oven functions.
Heat+Hold can be activated or deactivated in the Basic Settings
menu.
Time Extension
Allows the last oven function to continue
after a certain time has elapsed.
Precondition:
• All oven functions with Duration or
Weight Automatic.
• No oven functions with Meatprobe.
The Time Extension can be switched on
and off in the Basic Settings menu.
To switch on Time Extension
Oven function is completed.
Signal sounds and message appears.
1. Press any key.
2. Message for Time Extension ap-
pears for approx. 5 minutes.
3. Activate with Time Extension.
4. Set period of the Time Extension us-
ing or.
5. Start Time Extension using or let it
start automatically after 5 seconds.
The settings of the oven funtion are displayed with the new cook time.
using the oven electrolux 39
The rest of the procedure is the same as
a normal oven function. The Time Extension can be set repeatedly.
40 electrolux using the oven
Smell Filter
The catalytic effect of the filter removes
odours as much as possible.
The Smell Filter switches on automatically when a baking or roasting cycle
(except Specials) is started.
It switches off as soon as the baking or
roasting cycle is finished.
The Smell Filter is deactivated in delivery status. It is activated in the
Basic Settings menu.
Energy consumption is increased
when theSmell Filteris activated.
If Smell Filter is deactivated in the
Basic Settings menu, it will switch
on automatically after 100 operating
hours, during a baking or roasting
cycle, in order to self-clean.
Additional functions
Your oven is equipped with the following
additional functions:
• Minute Minder
• Duration
• End Time
• Key Lock
• Child Lock
• Safety shut-off
• Meatprobe
Minute Minder
To set a countdown. When it has counted down, an audible signal sounds.
This function has no effect on the operation of the oven.
1. Press key repeatedly until the
”Minute Minder” window appears.
Using or key, set the desired countdown (max. 2 hours 30 minutes).
using the oven electrolux 41
2. Confirm with or wait 5 seconds.
The last menu option visited and the
remaining time are displayed.
When the time has counted down to
10%, a short signal sounds.
When the time has elapsed, an acoustic
signal sounds for 2 minutes and a message is displayed.
3. Press any key to stop the signal (except ).
The Minute Minder remains active if
you change to another function or
the appliance is switched off.
42 electrolux using the oven
Durationor End Time
Duration
For setting how long the oven is to operate.
End Time
For setting when the oven is to switch itself off again.
1. Select oven function.
2. Press key repeatedly until the
”Duration/End Time” window appears.
3. Using or key, set the desired
cooking time or switch-off time
(max. 23 hours 59 minutes).
4. Confirm with or wait 5 seconds.
The settings of the selected oven
function are displayed with the cooking time or switch-off time set.
When the time has elapsed, an acoustic
signal sounds for 2 minutes and a message is displayed.
The oven switches itself off.
5. Press any key to stop the signal (except ).
Irrespective of the oven function set
the fixed cook time remains. You
can move between the oven functions.
Condition: The oven function to
which you move has no fixed cook
time.
If the Meatprobe is inserted, Duration or End Time is not possible.
Using residual heat with the
Duration and End Time clock
functions
When the Duration and End Time
clock functions are used, the oven
switches the heating elements off, when
90% of the time set or calculated has
elapsed. The residual heat present is
used to continue the cooking process
until the time set has elapsed
(3 to 20 mins.).
Duration and End Time combined
Duration and End Time can be
used simultaneously, if the oven is
to be switched on and off automatically at a later time.
using the oven electrolux 43
1. Select oven function.
2. Press key repeatedly until the
”Duration/End Time” window appears.
3. Using the Duration function, set
the time required for cooking the
dish, e.g.: 1 hour.
4. Confirm with .
5. Using the End Time function, set
the time at which the dish is to be
ready, e.g.: 14:05.
6. Confirm with or wait 5 seconds.
7. The selected oven function is dis-
played with the cooking time and
switch-off time set for a few seconds..
44 electrolux using the oven
A message is displayed when the programme starts.
Key Lock
The key lock protects all functions set
from accidental changes.
To switch on Key Lock
1. Select oven function.
2. Press key repeatedly until the
”Key Lock” window appears.
3. Confirm with .
The Key Lock is now activated.
To switch off Key Lock
1. Press the key.
2. Confirm with .
The Key Lock does not protect the
appliance from being accidentally
switched off.
After the appliance is switched off,
the Key Lock is automatically cancelled.
Child Lockfor the oven
As soon as the Child Lock child safety
device is activated, the oven cannot be
operated.
Switching on the Child Lock
No Oven Function must be selected.
1. Press and keys at the same
time until a message appears in the
display.
The key lock Child Lock is in operation.
Switching off the Child Lock
1. Press and keys at the same
time until a message appears in the
display.
The Child Lock is now deactivated and
the oven is again ready for use.
Oven Automatic shut-off
If the oven is not switched off after a
certain time, or if the heat setting is
not modified, the oven switches off
automatically.
The oven switches itself off when the
core temperature set by you is reached.
Important!: Only the Meatprobe
supplied may be used. If replacing,
please use only original replacement parts.
Setting Meatprobe core temperature
1. Switch the appliance on with .
2. Push the tip of the Meatprobe right
into the meat so that the tip is in the
centre of the meat.
3. Insert the plug of the Meatprobe as
far as it will go into the socket on the
side wall of the oven.
The window ”Meatprobe” is displayed.
4. Within 5 seconds using or set
the desired core temperature.
5. Confirm set core temperature with
.
6. Select oven function.
The menu for the oven function is displayed.
7. If necessary, set oven temperature.
Within a few minutes a provisional
end time at which the set core temperature will be reached is calculated. This time is constantly
recalculated and updated in the display. The system requires that the
Meatprobe is pushed into the meat
and into the socket at the beginning
of the cooking process and that it is
not removed during the cooking
process.
As soon as the pre-set core temperature
is reached, a signal sounds.
8. Press any key to switch off the signal.
The Meatprobe can also be set, if an
oven function has already been selected.
To subsequently change the core
temperature, press key.
using the oven electrolux 47
The core temperature is displayed
from 30°C.
48 electrolux using the oven
Removing the meat probe
Warning: The meat probe is very
hot. There is a risk of being burned
when removing the plug and the tip
of the meat probe.
1. Remove the meat probe’s plug from
the socket and take the meat out of
the oven.
2. Switch off the appliance.
Mechanical door lock
When the appliance is delivered the
door lock is deactivated.
Activating door lock
1. Take hold of the door trim(B) on the
upper edge of the door at both sides
and press inwards to release the clip
seal. Then remove the door trim by
pulling it upwards.
using the oven electrolux 49
2. Activate lever:
Remove lever (1) and
move 4mm to the left (2)
and insert (3).
3. Take hold of the door trim (B) at each
side, position it on the inside edge of
the door and plug the door trim (B)
into the upper edge of the door
50 electrolux using the oven
On the open side of the door trim (B)
there is a guide bar (C). This must be
pushed between the outer door
panel and the guide corner (D).
The clip seal (E) must be snapped in.
To open the oven door.
1. Keep lever pressed.
2. Open the door.
To close the oven
Close door without pressing the le-
ver.
Deactivating door lock
To deactivate the door lock, the lever is
moved to the right again. Proceed as
described above.
Switching off the appliance does
not remove the mechanical door
lock.
Removing door lock
1. Take hold of the door trim(B) on the
upper edge of the door at both sides
and press inwards to release the clip
seal. Then remove the door trim by
pulling it upwards.
2. Demount lever:
Remove lever (1).
using the oven electrolux 51
3. Remove trim from the under side of
the door trim (B)(2) and push in (3).
52 electrolux using the oven
4. Take hold of the door trim (B) at each
side, position it on the inside edge of
the door and push the door trim (B)
onto the upper edge of the door
On the open side of the door trim(B)
there is a guide bar(C). This must be
pushed between the outer door
panel and the guide corner(D).
The clip seal(E) must be snapped in.
5. Close the oven door.
Cleaning and Care
Warning: First switch off the appliance and let it cool down before
carrying out any cleaning.
Warning: For safety reasons, do not
clean the appliance with steam blasters
or high-pressure cleaners.
Attention: Do not use any corrosive
cleaning fluids, sharp objects or
stain removers.
cleaning and care electrolux 53
Clean the appliance after each use.
In this way, residue is easier to clean
off and does not have the chance to
burn on. Residue that is not removed may cause changes to the
surface colour when Pyrolytic is
used.
1. The oven light switches on automatically when the oven door is opened.
2. After every use, wipe the oven with a
solution of washing-up liquid and allow to dry.
Do not clean the glass oven door with
abrasive fluids or metal scrapers, which
could scratch the surface. The glass
could crack and shatter.
Outside of the appliance
• Wipe the front of the appliance with
a soft cloth and a solution of hot water and washing up liquid.
• For metal fronts, use normal commercially available cleaning agents.
• Please do not use scouring agents
and abrasive sponges.
Oven interior
Warning: For the purpose of cleaning the oven must be switched off
and have cooled down.
In the event of stubborn dirt, clean
using Pyrolytic.
Important: If you are using an oven
spray, be sure to follow the manufacturerís instructions.
Accessories
Wash all slide-in units (shelf unit, baking
tray, shelf support rails etc.) after each
use and dry well. Soak briefly to make
them easier to clean.
Fat Filter
1. Clean the fat filter in hot water and
washing up liquid or in the dishwasher.
2. Badly burned on soiling can be removed by boiling the filter in a little
water to which 2-3 tablespoonsful of
dishwasher cleaner has been added.
54 electrolux cleaning and care
Pyrolytic
Warning: During this process the oven
gets extremely hot. Keep small children
away.
Important Before carrying out the Pyroluxe process, all removable parts, including the side rails, must be removed
from the oven.
The oven shelf runners must be re-moved before starting Pyroluxe.
If any shelf runners are still in the oven, a
message to this effect will appear in the
display. You will not then be able to start
the Pyroluxe process because of a safety cut-out to protect the oven shelf runners.
1. First remove the worst of the residue
manually.
2. Use or to select the cleaning
option.
3. Confirm by pressing .
4. Use or to select the Pyrolytic
option.
5. Confirm by pressing
6. Use or to select the Pyroluxe duration.
– Light for a light degree of soiling (du-
ration 2:15),
– Normal for a normal degree of soiling
(duration 2:45),
– Intense for a high degree of soiling
(duration 3:15).
The Duration is shown on the display.
The Pyroluxe process starts.
Do not open the oven door during
the heating up time, otherwise the
process is cancelled.
The oven light does not work.
When a pre-set temperature is
reached, the door is locked.
Changing the Pyroluxe switch-off
time
7. The Pyroluxe switch-off time can be
delayed by up to two minutes using
the End Time clock function.
cleaning and care electrolux 55
56 electrolux cleaning and care
Cleaning Assistant
Before Pyrolytic the Cleaning Assistant reminds you what has to be
observed with Pyrolytic.
Cleaning AssistantTo switch on and
off
1. Using or select the menu option
Cleaning.
2. Confirm with .
3. Using or select the menu option
Cleaning Assistant.
4. Using or switch the Cleaning As-
sistant on or off.
Cleaning Reminder
5. The Cleaning Reminderrecognises
when pyrolytic cleaning is required
and alerts the user to this fact.
The Cleaning Reminderis switched
on/off in accordance with the
Cleaning Assistant. (see section on
Cleaning Assistant).
Oven Shelf Runner
The shelf support rails on the left and
right hand sides of the oven can be removed for cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from
the oven wall and then unhitch at the
back.
cleaning and care electrolux 57
Fitting the shelf support rails
When inserting the rails, make sure
that the retaining pins on the telescopic runners are pointing to the
front.
To install, first reattach the rails at the
back, then put them into position at the
front and press them into place.
58 electrolux cleaning and care
Cleaning the Oven Shelf Runner
Clean oven shelf runners with hot water
and washing up liquid.
Important: The oven shelf runners
cannot be cleaned in the dishwasher.
Important: On no account grease
telescopic runners.
Information regarding use in pyrolytic appliances:
The oven shelf runners must be removed before pyrolytic cleaning is
carried out.
Oven Lighting
Warning: There is a danger of electric shock! Prior to changing the
oven light bulb:
– Switch off the oven!
– Remove the fuses in the fuse box or
switch off the circuit breaker.
Place a cloth on the oven floor to
protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
1. Remove the glass cover by turning it
anti-clockwise and then clean it.
2. If necessary:
Replace bulb with a 40 watt,
230 V, 300 °C heat-resistant
oven light bulb.
3. Refit the glass cover.
cleaning and care electrolux 59
60 electrolux cleaning and care
Changing side oven light/
Cleaning glass cover
1. Remove the left shelf support rail.
2. Remove the glass cover with the aid
of a narrow, blunt implement (e. g.,
teaspoon) and clean it.
3. If necessary, exchange the halogen
oven lamp.
Order replacement lamp from Customer Service (see under Service/
Customer Service).
Always use a cloth to take hold of a
halogen light to avoid burning on
fatty deposits.
4. Refit the glass cover.
5. Insert the shelf support rail.
Oven door
For easier cleaning of the oven interior
the oven door of your appliance can be
taken off its hinges.
Removing the oven door from its
hinges
1. Open the oven door as far as it will
go.
2. Undo the clamping levers (A) on
both door hinges fully.
cleaning and care electrolux 61
3. Close the oven door as far as the first
position (approx. 45°).
4. Take hold of the oven door with a
hand on each side and pull it away
from the oven at an upwards angle
(Take care: It is heavy).
Lay the oven door with the outer
side facing downwards on something soft and level, for example, a
blanket in order to prevent scratches.
62 electrolux cleaning and care
Hanging the oven door back on its
hinges
1. From the handle side take hold of the
oven door with a hand on each side
and hold at an angle of approx. 45°.
Position the recesses on the bottom
of the oven door on the hinges on
the oven.
Let the door slide down as far as it
will go.
2. Open the oven door as far as it will
go.
3. Fold up the clamping levers (A) on
both door hinges back into their original positions.
4. Close the oven door.
Oven door glass
The oven door is fitted with four panels
of glass mounted one behind the other.
The inner panels can be removed for
cleaning.
Important Rough handling, especially around the edges of the front
panel, can cause the glass to break.
Removing door glass panels
1. Open the oven door as far as it will
go.
2. Undo the clamping levers (A) on
both door hinges fully.
cleaning and care electrolux 63
3. Close the oven door as far as the first
position (approx. 45°).
64 electrolux cleaning and care
4. Take hold of the door trim (B) on the
upper edge of the door at both sides
and press inwards to release the clip
seal. Then remove the door trim by
pulling it upwards.
5. Take hold of the door glass panels on
their upper edge one after the other
and take them out of the guide by
pulling them upwards.
Cleaning the door glass panels
Clean the door glass panels thoroughly
with a solution of water and washing up
liquid. Then dry them carefully.
Putting the door glass panels back.
1. From above insert the door glass
panels one after the other into the
door profile at the bottom edge of
the door at an angle and lower them.
The two smaller panels first, then
the larger panel.
2. Take hold of the door trim (B) at each
side, position it on the inside edge of
the door and plug the door trim (B)
into the upper edge of the door.
On the open side of the door trim (B)
there is a guide bar (C). This must be
pushed between the outer door
panel and the guide corner (D).
The clip seal (E) must be snapped in.
cleaning and care electrolux 65
66 electrolux cleaning and care
3. Open the oven door as far as it will
go.
4. Fold up the clamping levers (A) on
both door hinges back into their original positions.
5. Close the oven door.
What to do if …
what to do if … electrolux 67
Problem
The oven is not heating upThe oven has not been switched onSwitch oven on
The oven lighting is not operating
Pyroluxe is not working
A message appears in the
display
“F11” appears in the time
display.
A fault code that is not listed
above appears in the time
display
Possible causeRemedy
The required settings have not
been set
The building’s wiring fuse (in the
fuse box) has tripped
The oven light bulb is faultyReplace oven light bulb
Side rails/oven shelf runners
have not been removed
The meat probe has shortcircuited or the plug of the meat
probe is not firmly in position in
the socket
Electronic faultSwitch the appliance off and on
Check the settings
Check the fuse If the fuses trip
several times, please call a qualified electrician
Remove side rails/oven shelf
runners
Insert the meat probe plug into
the socket on the oven side wall
as far as it will go
again via the building’s fuse or
the safety switch in the fuse
box.
If it is displayed again, please
contact the Customer Care Department
68 electrolux what to do if …
If you are unable to remedy the
problem by following the above
suggestions, please contact your
dealer or the Customer Care Department.
Warning! Repairs to the appliance
are only to be carried out by qualified service engineers. Considerable danger to the user may result
from improper repairs.
If the appliance has been wrongly
operated, the visit from the customer service technician or dealer may
not take place free of charge, even
during the warranty period.
Advice on cookers with metal
fronts:
Because of the cold surface at the
front of the cooker, opening the
oven door during (or just after) baking or roasting may cause the glass
to steam up.
Installation Instructions
Attention: The new appliance may
only be installed and connected by a
registered expert.
Please comply with this. If you do
not, any damage resulting is not
covered by the warranty.
Safety information for the installer
• The electrical installation is to be set
up so that the appliance can be isolated from the mains with a minimum
3mm all-pole contact separation.
Suitable separation devices include
e.g. cut-outs, fuses (screw fuses are
to be taken out of the holder), RCD’s
and contactors.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
• Built-in ovens and built-in cooking
surfaces are fitted with special connection systems. For safety reasons,
they must only be combined with appliances from the same manufacturer.
The use of thermal insulation bars is not
permitted in cookers and ovens with Pyroluxe, if the recess has a back wall and
a solid bottom to the compartment.
However if the bottom is shortened by
at least 20 mm and there is ventilation in
the plinth of the same diameter, it does
become possible to build them in.
installation instructions electrolux 69
70 electrolux installation instructions
installation instructions electrolux 71
72 electrolux installation instructions
installation instructions electrolux 73
74 electrolux disposal
Disposal
Packaging material
The packaging materials are envi-
ronmentally friendly and can be recycled. The plastic components are
identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the
packaging materials in the appropriate container at the community
waste disposal facilities.
Old appliance
Warning: So that the old appliance
can no longer cause any danger,
make it unusable before disposing
of it.
To do this, disconnect the appliance
from the mains supply and remove
the mains cable from the appliance.
The symbol
its packaging indicates that this
product may not be treated as
household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment
and human health, which could otherwise be caused by inappropriate
waste handling of this product. For
more detailed information about recycling of this product, please contact your local city office, your
household waste disposal service
or the shop where you purchased
the product.
W on the product or on
Guarantee/Customer Service
European Guarantee
This appliance is guaranteed by Electrolux in
each of the countries listed at the back of this
user manual, for the period specified in the appliance guarantee or otherwise by law. If you move
from one of these countries to another of the
countries listed below the appliance guarantee
will move with you subject to the following qualifications:
• The appliance guarantee starts from the date
• The appliance guarantee is for the same pe-
• The appliance guarantee is personal to the
• The appliance is installed and used in ac-
• The appliance is installed in accordance with
The provisions of this European Guarantee do
not affect any of the rights granted to you by law.
www.electrolux.com
you first purchased the appliance which will
be evidenced by production of a valid purchase document issued by the seller of the
appliance.
riod and to the same extent for labour and
parts as exists in your new country of residence for this particular model or range of
appliances.
original purchaser of the appliance and cannot be transferred to another user.
cordance with instructions issued by Electrolux and is only used within the home, i.e. is
not used for commercial purposes.
all relevant regulations in force within your
new country of residence.
guarantee/customer service electrolux 75
ptb
Albania
Belgique/België/
Belgien
Èeská republika
Danmark
Deutschland
Eesti
+35 5 4 261 450
+32 2 363 04 44
+420 2 61 12 61 12
+45 70 11 74 00
+49 180 32 26 622
+37 2 66 50 030
Rr. Pjeter Bogdani Nr. 7 Tirane
Bergensesteenweg 719, 1502 Lembeek
Budìjovická 3, Praha 4, 140 21
Sjællandsgade 2, 7000 Fredericia
Muggenhofer Str. 135, 90429 Nürnberg
Mustamäe tee 24, 10621 Tallinn
76 electrolux guarantee/customer service
ptb
España
France
Great Britain
Hellas
Hrvatska
Ireland
Italia
Latvija
+34 902 11 63 88
www.electrolux.fr
+44 8705 929 929
+30 23 10 56 19 70
+385 1 63 23 338
+353 1 40 90 753
+39 (0) 434 558500
+37 17 84 59 34
Lithuania +3702780607
Luxembourg
Magyarország
Nederland
Norge
Österreich
Polska
Portugal
Romania
Schweiz/Suisse/
Svizzera
Slovenija
Slovensko
Suomi
Sverige
Türkiye
Россия
+352 42 431 301
+36 1 252 1773
+31 17 24 68 300
+47 81 5 30 222
+43 18 66 400
+48 22 43 47 300
+35 12 14 40 39 39
+40 21 451 20 30
+41 62 88 99 111
+38 61 24 25 731
+421 2 43 33 43 22
www.electrolux.fi
+46 (0)771 76 76 76
+90 21 22 93 10 25
+7 495 937 7837
Carretera M-300, Km. 29,900
Alcalá de Henares Madrid
Addington Way, Luton, Bedfordshire
LU4 9QQ
4 Limnou Str., 54627 Thessaloniki
Slavonska avenija 3, 10000 Zagreb
Long Mile Road Dublin 12
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Kr. Barona iela 130/2, LV-1012, Riga
Žirmūnų 67, LT-09001 Vilnius
Rue de Bitbourg, 7, L-1273 Hamm
H-1142 Budapest XIV,
Erzsébet királyné útja 87
Vennootsweg 1, 2404 CG Alphen aan den Rijn
Risløkkvn. 2 , 0508 Oslo
Herziggasse 9, 1230 Wien
ul. Kolejowa 5/7, Warszawa
Quinta da Fonte - Edificio Gonçalves Zarco - Q
35
2774 - 518 Paço de Arcos
Str. Garii Progresului 2, S4, 040671 RO
Industriestrasse 10, CH-5506 Mägenwil
Electrolux Ljubljana d.o.o.
Gerbièeva 98, 1000 Ljubljana
In the event of technical faults, please
first check whether you can remedy the
problem yourself with the help of the operating instructions (section “What to do
if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our
service partners.
In order to be able to assist you quickly,
we require the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Typ e o f faul t
– Any error messages displayed by the
appliance
So that you have the necessary reference numbers from your appliance at
hand, we recommend that you write
them in here:
Model description: .....................................
PNC:.....................................
S No:.....................................
www.electrolux.com
-
-
-
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.