TABLE OF CONTENTS
Description of the Appliance.........................................................3
Appliance overview ......................................................................................3
Side-views of the base.................................................................................4
Default settings (set in the factory)...............................................................4
Contents of the packing................................................................................5
Specific features...........................................................................................5
Installation of the appliance ..........................................................5
Safety precautions........................................................................................6
Configuration..................................................................................7
Setting the ringer volume .............................................................................7
Insert a pause............................................................................................... 7
Setting the dialing mode...............................................................................7
Setting the Flash time...................................................................................8
Using the telephone .......................................................................9
Answering an incoming call..........................................................................9
Calling Outside.............................................................................................9
Redial (simple) .............................................................................................9
Dialing a number from the shortcut dialing keys ..........................................9
Comfort functions ........................................................................10
Waiting call and toggling ............................................................................10
Consultation and toggling...........................................................................10
Conference call with three people..............................................................11
Turning off the microphone (Mute).............................................................11
Saving telephone numbers.........................................................................11
Appendix .......................................................................................12
Warranty..................................................................................................... 12
Technical data............................................................................................13
Troubleshooting..........................................................................................13
Maintenance...............................................................................................13
Recycling....................................................................................................13
INDEX.............................................................................................14
CE declaration of conformity......................................................................16
Environmental Protection...........................................................................16
2 AEG Milano 20_en
Description of the Appliance
Appliance overview
B A12 13
D
1
2
3
4
5
6
H 11 10 9 8
1. LED indicating communication.
2. Shortcut dialing memories M1 – M3.
3. memory calling key.
4. memory key.
5. "R" key.
6. repeat key.
7. Pause key.
8. mute key (microphone off).
9. LED indicating mute.
10. Alphanumeric keypad.
11. Loudspeaker.
12. Hook.
13. Table to fill out with the saved telephone numbers.
7
AEG Milano 20_en 3
Side-views of the base
C G
F E
A. Basic appliance
B. Handset
C. Sliding switch for setting the ringer volume (off, low, middle, high)
D. Handset cable inlet at the base
E. Sliding switch for setting the flash-time (100 or 300 ms)
F. Sliding switch for setting the dialing mode (P= impulse /T=tone)
G. Inlet for the telephone cord
H. Handset cable inlet at the handset
Default settings (set in the factory)
Dialing mode tone dialing
Flash – time 300 or 100 ms (depending on your country’s version)
Pause 3 seconds
Redial memory empty
Ringer volume high
4 AEG Milano 20_en
Contents of the packing
• 1 base
• 1 handset
• 1 cable for the handset
• 1 telephone line cord
• 1 manual
Specific features
• Re-dialing of the last number dialed
• Re-dialing with pause
• Volume of the ringer selectable in 3 levels or switched off
• Table appliance
• Can be used in connection with a switchboard
• Tone or pulse dialing – Flash-time adjustable
• LED for optical call indication
• Mute (microphone switched off)
• 3 memories for shortcut dialing M1-M3, 10 indirect memories 0-9
Installation of the appliance
1. Use the telephone line cord to realize the connection between the telephone outlet and the connection (G) at the back of the base.
2. Connect the handset cable to the inlet (D) of the base (A) and to inlet (C) of
the handset (B).
This manual is meant for your information. Its contents are no part of
the contract. All values quoted are standard values.
The described equipment and the options can be different, depending
on the requirements of your country. We reserve our right to technical
modifications.
AEG Milano 20_en 5