AEG EFC90671X, EFC6671X, EFC90673X, EFC60671X, EFC9673X User Manual
User manual
Manual de instrucciones
Manual de instruções
EFC 9670-6670
EFC 9671-6671-60671-90671
EFC 9673
WW
elcome to the world of Electrelcome to the world of Electr
W
elcome to the world of Electr
WW
elcome to the world of Electrelcome to the world of Electr
oluxolux
olux
oluxolux
Thank you for choosing a first class
product from Electrolux, which
hopefully will provide you with lots of
pleasure in the future. The Electrolux
ambition is to offer a wide variety of
quality products that make your life
more comfortable. You find some
examples on the cover in this manual.
Please take a few minutes to study this
manual so that you can take advantage
of the benefits of your new machine.
We promise that it will provide a
superior User Experience delivering
Ease-of-Mind.
Good luck!
electrolux 3electrolux 3
electrolux 3
electrolux 3electrolux 3
GB
44
electrelectr
electr
electrelectr
oluxolux
olux contents
oluxolux
4
44
Contents
GB
Safety warnings ................................ 5
Description of the Appliance ............. 7
Control Panel .................................... 8
Maintenance and Care ................... 14
Special accessories ........................ 19
Something Not Working .................. 19
Installation ...................................... 20
The following symbols are used in this user manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
General information and tips.
Environmental information.
Safety warnings
For the userFor the user
For the user
For the userFor the user
• The cooker hood is designed to
extract unpleasant odours from the
kitchen, it will not extract steam.
• Always cover lighted elements, to
prevent excess heat from damaging
the appliance. In the case of oil, gas
and coal fired cookers it is essential
to avoid open flames.
• Also, when frying, keep the deep
frying pan on the cooker top/cooker
under careful control.
• The hot oil in the frying pan might
ignite due to overheating.
• The risk of self-ignition increases
when the oil being used is dirty.
• It is extremely important to note that
overheating can cause a fire.
Never carry out any flambé cookingNever carry out any flambé cooking
•
Never carry out any flambé cooking
Never carry out any flambé cookingNever carry out any flambé cooking
under the hood.under the hood.
under the hood.
under the hood.under the hood.
Always disconnect the unit frAlways disconnect the unit fr
•
Always disconnect the unit fr
Always disconnect the unit frAlways disconnect the unit fr
power supply beforpower supply befor
power supply befor
power supply beforpower supply befor
any work on the hood, includingany work on the hood, including
any work on the hood, including
any work on the hood, includingany work on the hood, including
rr
eplacing the light bulbeplacing the light bulb
r
eplacing the light bulb (take the
rr
eplacing the light bulbeplacing the light bulb
e carrying oute carrying out
e carrying out
e carrying oute carrying out
cartridge fuse out of the fuse holder
or switch off the automatic circuit
breaker).
It is very important to clean the hoodIt is very important to clean the hood
•
It is very important to clean the hood
It is very important to clean the hoodIt is very important to clean the hood
and rand r
eplace the filter at theeplace the filter at the
and r
eplace the filter at the
and rand r
eplace the filter at theeplace the filter at the
rr
ecommended intervals. Failurecommended intervals. Failur
r
ecommended intervals. Failur
rr
ecommended intervals. Failurecommended intervals. Failur
do so could cause grdo so could cause gr
do so could cause gr
do so could cause grdo so could cause gr
to build up, rto build up, r
to build up, r
to build up, rto build up, r
esulting in a firesulting in a fir
esulting in a fir
esulting in a firesulting in a fir
ease depositsease deposits
ease deposits
ease depositsease deposits
• The appliance is not intended for use
by young children or infirm persons
without supervision.
• Older children must be supervised if
using the appliance.
om theom the
om the
om theom the
etoeto
eto
etoeto
e hazare hazar
e hazar
e hazare hazar
electroluxelectrolux
electrolux safety warnings
electroluxelectrolux
• Young children should be supervised
to ensure that they do not play with
the appliance.
••
WW
ARNING -ARNING -
•
W
ARNING - Ensure that the
••
WW
ARNING -ARNING appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock.
This appliance is marked according to
the European directive 2002/96/EC on
Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product.
The symbol on the product, or on
the documents accompanying the
product, indicates that this appliance
may not be treated as household
waste. Instead it should be taken to the
appropriate collection point for the
recycling of electrical and electronic
equipment.
Disposal must be carried out in
d.d.
d.
d.d.
accordance with local environmental
regulations for waste disposal.
For more detailed information about
treatment, recovery and recycling of
this product, please contact your local
council, your household waste disposal
service or the shop where you
purchased the product.
55
5
55
GB
66
electrelectr
6
66
oluxolux
electr
olux safety warnings
electrelectr
oluxolux
For the installerFor the installer
For the installer
For the installerFor the installer
• When used as an extractor unit, the
GB
hood must be fitted with a hose
having preferably the same diameter
as the outlet hole.
Attention:Attention:
Attention: The hose is not supplied
Attention:Attention:
and must be purchased separately.
••
When installing the hood, make surWhen installing the hood, make sur
•
When installing the hood, make sur
••
When installing the hood, make surWhen installing the hood, make sur
you observe the following minimumyou observe the following minimum
you observe the following minimum
you observe the following minimumyou observe the following minimum
distance frdistance fr
distance fr
distance frdistance fr
cooking hob/ring surfaces:cooking hob/ring surfaces:
cooking hob/ring surfaces:
cooking hob/ring surfaces:cooking hob/ring surfaces:
electric cookerselectric cookers
electric cookers
electric cookerselectric cookers
gas cookersgas cookers
gas cookers
gas cookersgas cookers
om the top edge of theom the top edge of the
om the top edge of the
om the top edge of theom the top edge of the
If the instructions for installation for
the gas hob specify a greater
distance, this must be adhered to.
• The national Standard on fuelburning systems specifies a maximum depression of 0.04 mbar in
such rooms.
• The air outlet must not be connected
to chimney flues or combustion gas
ducts. The air outlet must under no
circumstances be connected to
ventilation ducts for rooms in which
fuel-burning appliances are installed.
• The air outlet installation must comply
with the regulations laid down by the
relevant local authorities.
• When the unit is used in extraction
mode, a sufficiently large ventilation
hole must be provided, with
dimensions that are approximately
the same as the outlet hole.
• National and regional building
regulations impose a number of
restrictions on using hoods and fuelburning appliances connected to a
chimney, such as coal or oil roomheaters and gas fires, in the same
room.
500 mm500 mm
500 mm
500 mm500 mm
650 mm650 mm
650 mm
650 mm650 mm
• Hoods can only be used safely with
appliances connected to a chimney if
the room and/or flat (air/environment
combination) is ventilated from
outside using a suitable ventilation
hole approximately 500-600 cm
large to avoid the possibility of a
depression being created during
operation of the hood.
• If you have any doubts, contact the
relevant controlling authority or
ee
e
ee
building inspector’s office.
• Since the rule for rooms with fuel
burning appliances is “outlet hole of
the same size as the ventilation hole”,
a hole of 500-600 cm2, which is to
say a larger hole, could reduce the
performance of the extractor hood.
• If the hood is used in its recirculation
mode, it will operate simply and safely
in the above conditions without the
need for any of the aforementioned
measures.
• When the hood is used in its
extraction mode, the following rules
must be followed to obtain optimal
operation:
- short and straight outlet hose
- keep bends in outlet hose to a
minimum
- never install the hoses with an
acute angle, they must always
follow a gentle curve.
- keep the hose as large as possible
(preferably the same diameter as
the outlet hole).
- the length should be no more than:
3 metres with one 90° bend
2 metres with two 90° bends
Bends of more than 90° will reduce
the efficiency of the hood and
reduce the airflow.
• Failure to observe these basic
instructions will drastically reduce the
performance and increase the noise
levels of the extractor hood.
2
Description of the Appliance
The cooker hood is designed toThe cooker hood is designed to
•
The cooker hood is designed to
The cooker hood is designed toThe cooker hood is designed to
extract unpleasant odours frextract unpleasant odours fr
extract unpleasant odours fr
extract unpleasant odours frextract unpleasant odours fr
kitchen, it will not extract steam.kitchen, it will not extract steam.
kitchen, it will not extract steam.
kitchen, it will not extract steam.kitchen, it will not extract steam.
• The hood is supplied as an extractor
unit and can also be used with a
recirculation mode by fitting a
charcoal filter.
Only for EFC 60671-90671:Only for EFC 60671-90671:
•
Only for EFC 60671-90671: The
Only for EFC 60671-90671:Only for EFC 60671-90671:
cooker hood is supplied ready for use
as a recirculation hood and may be
used for extraction by removing the
charcoal filters.
Extraction modeExtraction mode
Extraction mode
Extraction modeExtraction mode
• In this mode fumes are extracted to
the outside via a
coupling ringcoupling ring
the
coupling ring.
coupling ringcoupling ring
hosehose
hose connected to
hosehose
• In order to obtain the best performance the hose should have a diameter
equal to the outlet hole.
om theom the
om the
om theom the
electroluxelectrolux
electrolux description of the appliance
electroluxelectrolux
Coupling ringCoupling ring
Coupling ring
Coupling ringCoupling ring
77
7
77
GB
RecirRecir
culation modeculation mode
Recir
culation mode
RecirRecir
culation modeculation mode
charchar
• The air is filtered through a
filterfilter
filter and returned to the kitchen.
filterfilter
char
charchar
coalcoal
coal
coalcoal
• You will need an original charcoal filter
for the recirculation mode. (See
Special Accessories).
88
electrelectr
8
88
oluxolux
electr
olux control panel
electrelectr
oluxolux
Control Panel
GB
• Best results are obtained by using a
low speed for normal conditions and
a high speed when odours are more
concentrated.
Turn the hood on a few minutes
before you start cooking.
The hood should be left on after
cooking for about 15 minutes or until
all the odours have disappeared.
ONLONL
Y EFC 9671-6671-9673 -Y EFC 9671-6671-9673 -
•
ONL
Y EFC 9671-6671-9673 -
ONLONL
Y EFC 9671-6671-9673 -Y EFC 9671-6671-9673 -
60671-90671 models:60671-90671 models:
60671-90671 models: The hood can
60671-90671 models:60671-90671 models:
also be commanded from the control
panel or the remote control. (the
remote control is a special accessory
and is ordered separately).
CorrCorr
ect ventilation:ect ventilation:
•
Corr
ect ventilation: If the cooker
CorrCorr
ect ventilation:ect ventilation:
hood is to work correctly there must
be an under pressure in the kitchen.
It is important to keep the kitchen
windows closed and have a window
in an adjacent room open.
• The control switches are located on
the hood’s front panel
• The cooker hood is fitted with a
sensor which, in the event of extreme
variations in temperature, switches
the appliance on automatically until
the temperature of the environment
surrounding the hood has been
significantly reduced.
Model EFC 9670-6670Model EFC 9670-6670
Model EFC 9670-6670
Model EFC 9670-6670Model EFC 9670-6670
Push-button 1Push-button 1
Push-button 1
Push-button 1Push-button 1
(ON/OFF)(ON/OFF)
(ON/OFF)
Light switchLight switch
Light switch
Light switchLight switch
(ON/OFF)(ON/OFF)
(ON/OFF)
(ON/OFF)(ON/OFF)
ON/OFF motorON/OFF motor
ON/OFF motor
ON/OFF motorON/OFF motor
speed keyspeed key
speed key
speed keyspeed key
Light switch (ON/OFF):Light switch (ON/OFF):
•
Light switch (ON/OFF): this switch is
Light switch (ON/OFF):Light switch (ON/OFF):
(ON/OFF)(ON/OFF)
used to turn the light fitted in the
hood on and off.
ON/OFF motor speed key:ON/OFF motor speed key:
•
ON/OFF motor speed key: serves to
ON/OFF motor speed key:ON/OFF motor speed key:
enable and disenable the speed
selection keys.
Push-button 1 (ON/OFF):Push-button 1 (ON/OFF):
•
Push-button 1 (ON/OFF): used to set
Push-button 1 (ON/OFF):Push-button 1 (ON/OFF):
the fan to speed 1.
Push-button 2 (ON/OFF):Push-button 2 (ON/OFF):
•
Push-button 2 (ON/OFF): used to set
Push-button 2 (ON/OFF):Push-button 2 (ON/OFF):
the fan to speed 2.
Push-button 3 (ON/OFF):Push-button 3 (ON/OFF):
•
Push-button 3 (ON/OFF): used to set
Push-button 3 (ON/OFF):Push-button 3 (ON/OFF):
the fan to speed 3.
Push-button 2Push-button 2
Push-button 2
Push-button 2Push-button 2
(ON/OFF)(ON/OFF)
(ON/OFF)
(ON/OFF)(ON/OFF)
electroluxelectrolux
electrolux control panel
electroluxelectrolux
Push-button 3Push-button 3
Push-button 3
Push-button 3Push-button 3
(ON/OFF)(ON/OFF)
(ON/OFF)
(ON/OFF)(ON/OFF)
99
9
99
GB
1010
electrelectr
10
1010
Modell EFC 9671-6671-Modell EFC 9671-6671-
Modell EFC 9671-6671-60671-90671
Modell EFC 9671-6671-Modell EFC 9671-6671-
oluxolux
electr
olux control panel
electrelectr
oluxolux
GB
6
12 345
1.1.
Lights key ON/OFFLights key ON/OFF
1.
Lights key ON/OFF
1.1.
Lights key ON/OFFLights key ON/OFF
2.2.
Motor stand-by/OFF key:Motor stand-by/OFF key:
2.
Motor stand-by/OFF key:
2.2.
Motor stand-by/OFF key:Motor stand-by/OFF key:
Stand-byStand-by
Stand-by (dot in the lit display): all the commands are enabled for functioning,
Stand-byStand-by
press the key for more than 1 second to set the hood on OFF.
OFFOFF
OFF (display off): and the commands with the exception of the ON/OFF lights
OFFOFF
key are disenabled. Press the key for more than 1 second to set the hood in
Stand-by.
3.3.
Selection and aspiration speed (power) and timer key:Selection and aspiration speed (power) and timer key:
3.
Selection and aspiration speed (power) and timer key: press to select the
3.3.
Selection and aspiration speed (power) and timer key:Selection and aspiration speed (power) and timer key:
aspiration speed (power) or set the hood in stand-by in the sequence:
2-.....2-.....
2-.....
2-.....2-.....
TT
imer (ON/OFF):imer (ON/OFF):
T
imer (ON/OFF): once the speed (power) has been selected, pressing
TT
imer (ON/OFF):imer (ON/OFF):
successively for 2 seconds activates (ON – flashing dot on the display) or
deactivates (OFF) the timer function. This allows the aspiration speed (power)
selected for a predetermined time to function:
Aspiration Speed (power) 1:Aspiration Speed (power) 1:
Aspiration Speed (power) 1: 20 minutes
Aspiration Speed (power) 1:Aspiration Speed (power) 1:
Aspiration Speed (power) 2:Aspiration Speed (power) 2:
Aspiration Speed (power) 2: 15 minutes
Aspiration Speed (power) 2:Aspiration Speed (power) 2:
Aspiration Speed (power) 3:Aspiration Speed (power) 3:
Aspiration Speed (power) 3: 10 minutes
Aspiration Speed (power) 3:Aspiration Speed (power) 3:
After which the hood goes into stand-by.
4.4.
Intensive aspiration (power) keyIntensive aspiration (power) key
4.
Intensive aspiration (power) key
4.4.
Intensive aspiration (power) keyIntensive aspiration (power) key
press to select the intensive aspiration speed (power). It will function for 5
minutes after which the hood goes into
Pressing before the five minutes have passed, the hood returns to the
previously set speed.
5.5.
Filters saturation rFilters saturation r
5.
Filters saturation r
5.5.
Filters saturation rFilters saturation r
6.6.
6. Display
6.6.
eset key:eset key:
eset key: see the relative text on the following pages.
eset key:eset key:
(timed) ON(timed) ON
(timed) ON (flashing dot on the display)
(timed) ON(timed) ON
stand-bystand-by
stand-by.
stand-bystand-by
1-2-3-1-1-2-3-1-
1-2-3-1-
1-2-3-1-1-2-3-1-
/OFF:/OFF:
/OFF:
/OFF:/OFF:
Should the hood or the controls fail to operate: disconnect the power supply for at
least 5 seconds. After reconnecting the power supply wait 15 seconds and then
check that the cooker hood is now operating
correctly.
GrGr
ease and charease and char
Gr
ease and char
GrGr
ease and charease and char
maintenance indicatormaintenance indicator
maintenance indicator
maintenance indicatormaintenance indicator
coal filtercoal filter
coal filter
coal filtercoal filter
This hood is fitted with a device that
indicates when it is necessary to clean
the grease filter or the charcoal filter (if
the hood is used in the recirculation
version with a charcoal filter).
EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670
EFC 9670-9671-9673- 6670
EFC 9670-9671-9673- 6670EFC 9670-9671-9673- 6670
On delivery, the hood is not supplied
with a charcoal filter, so the saturation
indicator will be disabled.
electroluxelectrolux
electrolux control panel
electroluxelectrolux
Grease filter LED (F)
FF
LED
F will start to flash when it is time
FF
to clean the grease filter.
Cleaning will be necessary after 40
working hours. Always comply with the
maintenance instructions for the grease
filter.
Charcoal filter LED (C)
The charcoal filter LED
CC
C will start to
CC
flash when the charcoal filter needs to
be replaced.
This operation is necessary after
approximately 160 working hours.
1111
11
1111
GB
If the hood is to be used with a
charcoal filter
(EFC 90670-60670:(EFC 90670-60670:
(EFC 90670-60670: the
(EFC 90670-60670:(EFC 90670-60670:
hood is supplied with a charcoal filter),
the saturation
indicator light must be enabled as
follows:
Set in "
Press buttons
OFFOFF
OFF" the hood.
OFFOFF
44
4 and
44
55
5 simultaneously
55
and hold them for 3 seconds. At first
only the grease filter LED
but when the charcoal filter LED
FF
F will light up,
FF
CC
C
CC
lights up the saturation indicator will be
enabled.
44
To disable it: Press buttons
4and
44
55
5
55
again simultaneously and hold
them for 3 seconds, until the charcoal
filter LED goes out.
Resetting the saturation indicator
After cleaning or replacing the filters,
press button
grease filter LED
CC
LED
C stops flashing.
CC
55
5 for 3 seconds until the
55
FF
F or the charcoal filter
FF
1212
electrelectr
12
electr
1212
electrelectr
Model EFC 9673Model EFC 9673
Model EFC 9673
Model EFC 9673Model EFC 9673
GB
11
Light switch, ON/OFFLight switch, ON/OFF
1.
Light switch, ON/OFF
11
Light switch, ON/OFFLight switch, ON/OFF
22
Mains switch, ON/OFFMains switch, ON/OFF
2.
Mains switch, ON/OFF
22
Mains switch, ON/OFFMains switch, ON/OFF
Press for less than 1 1/2 seconds and the cooker hood goes into the "
byby
by" position (dot
byby
Press for more than 1 1/2 seconds and the cooker hood turns OFF, ALL the
controls (except the light push button) are disabled (the display is off).
Press again for more than 1 1/2 seconds to reset the cooker hood to "stand
by".
3.3.
Filters saturation rFilters saturation r
3.
Filters saturation r
3.3.
Filters saturation rFilters saturation r
44
Start and choice of motor speed 1-2-3-1-2...Start and choice of motor speed 1-2-3-1-2...
4.
Start and choice of motor speed 1-2-3-1-2...
44
Start and choice of motor speed 1-2-3-1-2...Start and choice of motor speed 1-2-3-1-2...
55
Intensive speed ON/OFF:Intensive speed ON/OFF:
5.
Intensive speed ON/OFF: The Intensive speed runs for 5 minutes:
55
Intensive speed ON/OFF:Intensive speed ON/OFF:
If the hood is on when the Intensive speed is activated, the hood will revert to
previous speed after 5 minutes. If the hood is off when the Intensive speed is
activated, the hood will automatically turn off after 5 minutes.
The letter
display is flashing), if interrupted an acoustic signal is heard.
66
Self-TSelf-T
6.
Self-T
66
Self-TSelf-T
flashing), and then the cooker hood switches off:
The self-timer is set as follows:
1stspeed level 20 minutes
2ndspeed level 15 minutes
3rdspeed level 10 minutes
The display shows the remaining operation time, at the end of the time an
acoustic signal is heard. Depressing the push-button again exits the function.
77
DisplayDisplay
7.
Display
77
DisplayDisplay
oluxolux
olux control panel
oluxolux
ab
123 456
“a”“a”
“a” on display is illuminated).
“a”“a”
eset key:eset key:
eset key: see the relative text on the following pages.
eset key:eset key:
PP
P appears on the display and the remaining time (the dot
PP
imer ON/OFF:imer ON/OFF:
imer ON/OFF: times all the speed levels (the dot
imer ON/OFF:imer ON/OFF:
7
“b”“b”
“b” on
“b”“b”
“a”“a”
“a” on display is
“a”“a”
standstand
stand
standstand
Should the hood or the controls fail to operate: disconnect the power supply for at
least 5 seconds. After reconnecting the power supply wait 15 seconds and then
check that the cooker hood is now operating correctly.
GrGr
ease and charease and char
Gr
ease and char
GrGr
ease and charease and char
maintenance indicatormaintenance indicator
maintenance indicator
maintenance indicatormaintenance indicator
coal filtercoal filter
coal filter
coal filtercoal filter
This hood is fitted with a device that
indicates when it is necessary to clean
the grease filter or the charcoal filter (if
the hood is used in the recirculation
version with a charcoal filter).
On delivery, the hood is not supplied
with a charcoal filter, so the saturation
indicator will be disabled.
If the hood is to be used with a
charcoal filter, the saturation
indicator light must be enabled as
follows:
Set in "
Press buttons
OFFOFF
OFF" the hood.
OFFOFF
33
3 and
33
44
4 simultaneously
44
and hold them for 3 seconds. At first
only the grease filter LED
but when the charcoal filter LED
FF
F will light up,
FF
CC
C
CC
lights up the saturation indicator will be
enabled.
33
To disable it: Press buttons
3and
33
44
4
44
again simultaneously and hold
them for 3 seconds, until the charcoal
filter LED goes out.
electroluxelectrolux
electrolux control panel
electroluxelectrolux
Grease filter LED (F)
FF
LED
F will start to flash when it is time
FF
to clean the grease filter.
Cleaning will be necessary after 40
working hours. Always comply with the
maintenance instructions for the grease
filter.
Charcoal filter LED (C)
The charcoal filter LED
CC
C will start to
CC
flash when the charcoal filter needs to
be replaced.
This operation is necessary after
approximately 160 working hours.
Resetting the saturation indicator
After cleaning or replacing the filters,
press button
grease filter LED
CC
LED
C stops flashing.
CC
33
3 for 3 seconds until the
33
FF
F or the charcoal filter
FF
1313
13
1313
GB
1414
x 4
electrelectr
14
1414
oluxolux
electr
olux maintenance and care
electrelectr
oluxolux
Maintenance and Care
GB
••
BeforBefor
•
••
Air suction panelsAir suction panels
Air suction panels
Air suction panelsAir suction panels
EFC 9673 onlyEFC 9673 only
EFC 9673 only
EFC 9673 onlyEFC 9673 only
Remove the perimeter air suction
panels to access the grease filters.
The perimeter air suction panels are
attached to the cooker hood by a
series of
pull them outwards and detach them
from the
Clean the perimeter air suction panels
as often as the grease filters (for more
information about gentle cleaning
methods, read the paragraph
“Cleaning” in the pages that follow).
e performing any maintenance operation, isolate the hood fre performing any maintenance operation, isolate the hood fr
Befor
e performing any maintenance operation, isolate the hood fr
BeforBefor
e performing any maintenance operation, isolate the hood fre performing any maintenance operation, isolate the hood fr
electrical supply by switching ofelectrical supply by switching of
electrical supply by switching of
electrical supply by switching ofelectrical supply by switching of
connector fuse.connector fuse.
connector fuse.
connector fuse.connector fuse.
Or if the appliance has been connected thrOr if the appliance has been connected thr
Or if the appliance has been connected thr
Or if the appliance has been connected thrOr if the appliance has been connected thr
plug must be rplug must be r
plug must be r
plug must be rplug must be r
pinspins
pins and
pinspins
fastening cablefastening cable
fastening cable.
fastening cablefastening cable
emoved fremoved fr
emoved fr
emoved fremoved fr
coupling springscoupling springs
coupling springs;
coupling springscoupling springs
f at the connector and rf at the connector and r
f at the connector and r
f at the connector and rf at the connector and r
om the socket.om the socket.
om the socket.
om the socket.om the socket.
om theom the
om the
om theom the
emoving theemoving the
emoving the
emoving theemoving the
ough a plug and socket, then theough a plug and socket, then the
ough a plug and socket, then the
ough a plug and socket, then theough a plug and socket, then the
When refitting the perimeter air suction
panels, ALWAYS reattach the fastening
cables.
Make sure the panels are attached to
the cooker hood properly (snapfastened).
electroluxelectrolux
electrolux maintenance and care
electroluxelectrolux
1515
15
1515
Metal grMetal gr
Metal gr
Metal grMetal gr
ease filterease filter
ease filter
ease filterease filter
• The purpose of the grease filters is to
absorb grease particles which form
during cooking and it
mustmust
must always be
mustmust
used, either in the external extraction
or internal re-circulation function.
Attention: the metal grease filters
must be removed and washed, either
by hand or in the dishwasher, every
four weeks.
Removing the metal grRemoving the metal gr
Removing the metal gr
Removing the metal grRemoving the metal gr
ease filterease filter
ease filter
ease filterease filter
• Use the spring handle and remove
the filter downward.
Hand washingHand washing
Hand washing
Hand washingHand washing
Soak grease filters for about one hour
in hot water with a grease-loosening
cleaner, then rinse off thoroughly with
hot water. Repeat the process if
necessary. Refit the grease filters
when they are dry.
DishwasherDishwasher
Dishwasher
DishwasherDishwasher
Place grease filters in the dishwasher.
Select most powerful washing
programme and highest temperature,
at least 65°C. Repeat the process.
Refit the grease filters when they are
dry.
GB
When washing the metal grease filter
in the dishwasher a slight
discolouration of the filter can occur,
this does not have any impact on its
performance.
• Clean the inner housing using a hand
hot solution only(never use caustic
detergents, abrasive powders or
brushes).
1616
electrelectr
16
1616
CharChar
Char
CharChar
oluxolux
electr
olux maintenance and care
electrelectr
oluxolux
coal filtercoal filter
coal filter
coal filtercoal filter
• The charcoal filter should only be
GB
used if you want to use the hood in
recirculation mode.
• To do this you will need an original
charcoal filter (available from your
local Service Force Centre).
Cleaning/rCleaning/r
•
Cleaning/r
Cleaning/rCleaning/r
eplacing the chareplacing the char
eplacing the char
eplacing the chareplacing the char
Unlike other charcoal filters, the
LONGLIFE charcoal filter can be
cleaned and reactivated.
With normal use the filter should be
cleaned every second month (when
using the hood 2.5 hours per day,on
avarage). The best way to clean the
filter is in the dishwasher. Use normal
detergent and choose the highest
temperature (65º C). Wash the filter
separately so that no food parts gets
stuck on the filter and later causes bad
odours. To reactivate the charcoal, the
filter should be dried in an oven for 10
minutes with a maximum temperature
of 100º C.
After approximately three years of use,
the charcoal filter should be replaced
with a new one, as the odour reduction
capacity will be reduced.
coal filtercoal filter
coal filter
coal filtercoal filter
FittingFitting
•
Fitting
FittingFitting
Position the carbon filter inside the
hood to cover the protection grill of
the motor.
Fix the filter with 2 lateral knobs.
TT
oror
emoveemove
•
T
or
emove proceed in the reverse
TT
oror
emoveemove
order.
• Always specify the hood model code
number and serial number when
ordering replacement filters. This
information is shown on the rating
plate located on the inside of the unit.
• The charcoal filter can be ordered
from your local Service Force Centre.
WW
arar
ningning
W
ar
ning
WW
arar
ningning
• Failure to observe the instructions on
cleaning the unit and changing the
filters will cause a fire hazard. You are
therefore strongly recommended to
follow these instructions.
• The manufacturer declines all
responsibility for any damage to the
motor or any fire damage linked to
inappropriate maintenance or failure
to observe the above safety
recommendations.
Changing the light bulb(s)Changing the light bulb(s)
Changing the light bulb(s)
Changing the light bulb(s)Changing the light bulb(s)
electroluxelectrolux
electrolux maintenance and care
electroluxelectrolux
1717
17
1717
GB
Disconnect the cooker hood frDisconnect the cooker hood fr
•
Disconnect the cooker hood fr
Disconnect the cooker hood frDisconnect the cooker hood fr
the mains supplythe mains supply
the mains supply
the mains supplythe mains supply
••
Prior to touching the light bulbsPrior to touching the light bulbs
•
Prior to touching the light bulbs
••
Prior to touching the light bulbsPrior to touching the light bulbs
ensurensur
e they are they ar
ensur
e they ar
ensurensur
e they are they ar
EFC 9670-6670 Model:EFC 9670-6670 Model:
•
EFC 9670-6670 Model: remove the
EFC 9670-6670 Model:EFC 9670-6670 Model:
..
.
..
e cooled down.e cooled down.
e cooled down.
e cooled down.e cooled down.
omom
om
omom
overhead light, removing the fixing
clips.
All models:All models:
•
All models: Replace the old bulb with
All models:All models:
a new one of the same type.
EFC 9670-6670 Model:EFC 9670-6670 Model:
•
EFC 9670-6670 Model: mount the
EFC 9670-6670 Model:EFC 9670-6670 Model:
overhead light again and fix it in its
place with the clips.
• If the light does not come on, make
sure the bulb has been inserted in
correctly before contacting your local
Service Force Centre.
EFC 9671 - 6671- 9673 -60671-90671:EFC 9671 - 6671- 9673 -60671-90671:
EFC 9671 - 6671- 9673 -60671-90671:
EFC 9671 - 6671- 9673 -60671-90671:EFC 9671 - 6671- 9673 -60671-90671:
20W max20W max
20WmaxGU4-12V-Ø35mm - 30°
20W max20W max
Dichroic
EFC 9670-6670:EFC 9670-6670:
EFC 9670-6670: 11W max - G23
EFC 9670-6670:EFC 9670-6670:
1818
electrelectr
18
1818
Cleaning the hoodCleaning the hood
Cleaning the hood
Cleaning the hoodCleaning the hood
GB
oluxolux
electr
olux maintenance and care
electrelectr
oluxolux
• Clean the outside of the hood using a
damp cloth and a solution of water
and mild washing up liquid.
• Never use corrosive, abrasive or
flammable cleaning products or
products containing bleach.
• Never insert pointed objects in the
motor’s protective grid.
• Only ever clean the switch panel and
filter grill using a damp cloth and mild
washing up liquid.
• Clean all the plastic parts with a soft
cloth soaked in warm water and
neutral soap.
• It is extremely important to clean the
unit and change the filters at the
recommended intervals. Failure to do
so will cause grease deposits to build
up that could constitute a fire hazard.
electroluxelectrolux
electrolux special accessories
electroluxelectrolux
Special accessoriesSpecial accessories
Special accessories
Special accessoriesSpecial accessories
CharChar
coal filtercoal filter
Char
coal filter Type 967
CharChar
coal filtercoal filter
Remote contrRemote contr
Remote contr
Remote contrRemote contr
olol
ol RM 6940 E-Nr. 942 122 002
olol
Something Not Working
If your appliance fails to work properly please carry out the following checks.
1919
19
1919
GB
SymptomSymptom
Symptom
SymptomSymptom
The cooker hood will not start...
The cooker hood is not working
The cooker hood has switched off
during operation...
SolutionSolution
Solution
SolutionSolution
Check that:Check that:
Check that: The hood is connected
Check that:Check that:
to the electricity supply.
Check that a fan speed has been
selected.
Check that:Check that:
Check that: The fan speed is set high
Check that:Check that:
enough for the task.
The grease filters are clean.
The kitchen is adequately vented to
allow the entry of fresh air.
If set up for recirculation, check that
the charcoal filter is still effective.
If set up for extraction, check that the
ducting and outlets are not blocked.
The safety cut-out device has been
tripped. Turn off the hob and then wait
for the device to reset. If the hood has
been installed below the heights
indicated in the installation instructions
the motor will cut-out frequently which
will damage the hood.
If after all these checks, the problem persists, contact your local Service Centre,
quoting the model and serial number.
Please note that it will be necessary to provide proof of purchase for any inguarantee service calls.
In-guarantee customers should ensure that the above checks have been made as
the engineer will make a charge if the fault is not a mechanical or electrical
breakdown.
2020
20
2020
Installation
GB
TT
echnical Detailsechnical Details
T
echnical Details
TT
echnical Detailsechnical Details
electrelectr
oluxolux
electr
olux installation
electrelectr
oluxolux
Dimensions (in cm):Dimensions (in cm):
Dimensions (in cm):
Dimensions (in cm):Dimensions (in cm):
EFC 9670EFC 9670
EFC 9670
EFC 9670EFC 9670
(EFC 6670)(EFC 6670)
(EFC 6670)
(EFC 6670)(EFC 6670)
EFC 9671-90671EFC 9671-90671
EFC 9671-90671
EFC 9671-90671EFC 9671-90671
(EFC 6671-60671)(EFC 6671-60671)
(EFC 6671-60671)
(EFC 6671-60671)(EFC 6671-60671)
EFC 9673EFC 9673
EFC 9673
EFC 9673EFC 9673
Height (Extract. mode): 73-116 73-116 73-116
Height (Recirc. mode): 84,5-126 84,5-126 84,5-126
Width: 89,8 (59,8) 89,8 (59,8) 89,8
Depth: 45 45 45
Max.Max.
absorb. power:absorb. power:
Max.
absorb. power:
Max.Max.
absorb. power:absorb. power:
185 W185 W
185 W
185 W185 W
310 W(290 W)310 W(290 W)
310 W(290 W)
310 W(290 W)310 W(290 W)
310 W310 W
310 W
310 W310 W
Motor: 170 W 250 W 250 W
Lighting: 11 W 3 x20 W (2 x 20 W) 3 x20 W
Length of the cable:Length of the cable:
Length of the cable:
Length of the cable:Length of the cable:
Electrical connection:Electrical connection:
Electrical connection:
Electrical connection:Electrical connection:
Fuse rating:Fuse rating:
Fuse rating:
Fuse rating:Fuse rating:
Mounting accessories includedMounting accessories included
Mounting accessories included
Mounting accessories includedMounting accessories included
150 cm150 cm
150 cm
150 cm150 cm
220-240 V220-240 V
220-240 V
220-240 V220-240 V
5A T5A T
5A T
5A T5A T
150 cm150 cm
150 cm
150 cm150 cm
220-240 V220-240 V
220-240 V
220-240 V220-240 V
5A5A
TT
5A
T
5A5A
TT
150 cm150 cm
150 cm
150 cm150 cm
220-240 V220-240 V
220-240 V
220-240 V220-240 V
5A T5A T
5A T
5A T5A T
1 deflector (with extensions)
1 Allan wrench for torx screws
1 fixing bracket for motor unit
1 support bracket for flues (3 pieces to assemble)
5screws5x45mm
5 dowelsØ8mm
2 screws 2.9 x 6.5
8 screws 3.5 x 6.5
4screws4x8
EFC 60671-90671:EFC 60671-90671:
EFC 60671-90671: 1 reduction flange Ø 125-120 mm
EFC 60671-90671:EFC 60671-90671:
electroluxelectrolux
electrolux installation
electroluxelectrolux
2121
21
2121
Electrical connection
(not for UK)
Safety warSafety war
Safety war
Safety warSafety war
Before connecting the appliance to the
power supply, check that the voltage
indicated on the rating plate
corresponds to the mains power supply
available. Appliances fitted with a plug
can be connected to any standard
power socket within easy access.
Should it be necessary to provide a
fixed connection, the hood must only
be installed by an electrician authorised
by the local electricity board. When
installing, an omnipolar disconnector
with a distance of at least 3 mm
between contacts must be provided.
Fixed connection of the appliance must
only be carried out by an authorised
electrician.
nings for the electriciannings for the electrician
nings for the electrician
nings for the electriciannings for the electrician
GREEN & YELLOW
Electrical connection for
UK only
Safety warSafety war
Safety war
Safety warSafety war
Connect the hood to the mains supply
via a double pole switch which has 3
mm minimum separation between the
contacts.
The switch must be accessible at all
times.
The following is valid in the United
Kingdom only:
- the wire which is coloured green and
yellow must be connected to the
terminal which is marked with the
letter E or by the earth symbol ( ),
or coloured green or green and
yellow;
- the wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black, -
- the wire which is coloured brown
must be connected to the terminal
which is marked with the letter L or
coloured red.
nings for the electriciannings for the electrician
nings for the electrician
nings for the electriciannings for the electrician
GB
BLUE
5AT
BROWN
CORD CLAMP
2222
A
B
180°
C - OK!
4 x Ø 4x8
=
=
X
F
F
G
6 x
Ø 3,5 x 6,5
electrelectr
22
2222
First decide which functioningFirst decide which functioning
First decide which functioning
First decide which functioningFirst decide which functioning
version is better for youversion is better for you
version is better for you
version is better for youversion is better for you
GB
If you decide to use the hood in
oluxolux
electr
olux installation
electrelectr
oluxolux
exhausting version we suggest you
position the upper section of the
chimney so that the oulet slots are not
visible once installation has ended, on
the contrary if it is decided to use the
hood in recycling version BE SURE that
the side with the slots is upright (see
also A-B-C sequence).
Assembling the chimney flue
support/bracket (3 parts)
The three parts should be fixed with 4
screws, the support extension is
adjustable and should correspond to
the internal width of the telescopic
chimney flue.
G
=
=
X
X
Assembling the deflector (3 parts –Assembling the deflector (3 parts –
Assembling the deflector (3 parts –
Assembling the deflector (3 parts –Assembling the deflector (3 parts –
only for filter version):only for filter version):
only for filter version):
only for filter version):only for filter version):
The three parts should be fixed with 2
screws, the deflector extension is
adjustable and should correspond to
the width of the chimney flue support,
to which it is then fixed.
InstallationInstallation
Installation
InstallationInstallation
electroluxelectrolux
electrolux installation
electroluxelectrolux
2323
23
2323
GB
Make surMake sur
Make sur
Make surMake sur
carrying out the installation.carrying out the installation.
carrying out the installation.
carrying out the installation.carrying out the installation.
e that the cooker hood is disconnected fre that the cooker hood is disconnected fr
e that the cooker hood is disconnected fr
e that the cooker hood is disconnected fre that the cooker hood is disconnected fr
om the power supply beforom the power supply befor
om the power supply befor
om the power supply beforom the power supply befor
Remove the perimeter air suction panels (EFC 9673 only) and the grease filters.
• Mark a central line on the wall to facilitate the installation procedure (
11
1). Position
11
the drilling template so that the median line printed on it corresponds to the
central line marked previously, and so that the lower side of the template
corresponds to the lower part of the cooker hood once it has been fitted (
22
2).
22
• Make 3 holes withØ8mm(2ontopand1underneath) and fit 3 rawl plugs into
33
them (
3).
33
• Fix the motor assembly support bracket in place using 2 screws (
44
4).
44
• Make two holes withØ8mmnear the ceiling and use them to fix the support
bracket of flue
which joins onto the ceiling). Insert 2 rawl plugs into the holes (
FF
F underneath the bracket using 4 screws if you wish to use the cooker hood as
FF
a filter version) and fix the bracket in place using 2 screws (
• Fit the cooker hood (
• Fix the cooker hood in place (
• Install the exhaust tube (
outside environment (ducted version) or deflector
• Perform all necessary electrical connections (
GG
G in place (use the bracket as a template – rest it against the wall
GG
55
5) (install deflector
55
66
6).
66
77
7) and adjust its position (
77
1010
10).
1010
1111
11) leading from cooker hood exhaust outlet
1111
8-98-9
8-9).
8-98-9
FF
F (filter version).
FF
1212
12).
1212
BB
B to the
BB
ee
e
ee
2424
24
2424
electrelectr
oluxolux
electr
olux installation
electrelectr
oluxolux
GB
F
G
4 x Ø 3,5x6,5
2 x Ø 5x45
12
11
G
5
2 x Ø 8
6
1
7
2
2 x Ø 8
3
B
8
9
10
4
2 x
Ø 5x45
3
1 x Ø 8
1 x Ø 5x45
Loading...