Thank you for choosing our product. From now on, cooking will always be pleasantly
creative with your new cooker.
We recommend carefully reading all the instructions in this manual, which includes
detailed information about the most suitable conditions for using the cooker correctly
and safely. These instructions also help you to become familiar with each component.
Useful advice is given for using recipients, utensils, positions of guides and control
settings.
The correct cleaning operations contained in this manual allow you to maintain the
cooker's performance unchanged over time.
The individual sections are set out in order to allow you to become familiar with all the
functions in the cooker. The text is easy to comprehend and is accompanied with
detailed images and simple pictograms.
Reading this manual thoroughly will provide you with the answer to any question that
may arise regarding the correct use of your new cooker.
INSTRUCTIONS FOR THE USER: include suggestions, the description of the controls
and the correct cleaning and maintenance operations for the appliance.
INSTRUCTIONS FOR THE INSTALLER: for the qualified technician who is in
charge of adequately checking the gas system, installing, commissioning and testing
the appliance.
Contents
1. Warnings for safety and use ________________________________ 5
2. General information ______________________________________ 6
2.1Technical service __________________________________________________________ 6
3. Description of controls_____________________________________ 7
3.1The front panel ____________________________________________________________ 7
4. Using the cooking hob ___________________________________ 13
4.1Switching on the burners ___________________________________________________ 13
4.2Switching off the burners ___________________________________________________ 13
5. Using the fry-top (If fitted) _________________________________ 14
5.1Before switching on the fry-top ______________________________________________ 14
15.1 Standard guarantee conditions ______________________________________________ 34
15.2 European Guarantee ______________________________________________________ 34
CLASSES OF APPLIANCES
The cooking appliances described in this operating manual belong to the following installation
classes:
•
Class 1: non-flush-mounted
•
Class 2 – subclass 1:
, made up of a single unit, but which can also be installed so that the
units
side walls are accessible.
cooking appliance;
cooking appliance
flush-mounted between two
Warnings
1. Warnings for safety and use
THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT SHOULD BE KEPT IN GOOD CONDITION AND CLOSE
TO THE APPLIANCE FOR THE WHOLE LIFECYCLE OF THE COOKER. WE RECOMMEND READING THIS MANUAL
VERY CAREFULLY BEFORE USING THE COOKER. ALSO KEEP THE SET OF NOZZLES PROVIDED.
INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL AND IN COMPLIANCE WITH CURRENT
STANDARDS.
IN FORCE. THE APPLIANCE IS BUILT FOR CARRYING OUT THE FOLLOWING FUNCTION:
FOOD;
RESPONSIBILITY SHOULD THE APPLIANCE BE USED FOR PURPOSES OTHER THAN THOSE INDICATED.
DO NOT LEAVE ANY PIECES OF THE PACKING UNATTENDED IN THE HOME. SEPARATE THE VARIOUS PACKING
MATERIALS AND DELIVER THEM TO THE NEAREST RECYCLING CENTRE.
THE EARTH CONNECTION MUST CONFORM WITH THE RELEVANT IEE REGULATIONS IN FORCE.
THIS APPLIANCE IS FOR DOMESTIC USE AND CONFORMS TO THE
ANY OTHER USE IS TO BE CONSIDERED IMPROPER.
EEC DIRECTIVES
COOKING AND HEATING
THE MANUFACTURER DECLINES ANY
CURRENTLY
THE
SHOULD THE GAS TAPS BE DIFFICULT TO ROTATE, CONTACT YOUR LOCAL SERVICE FORCE CENTRE.
IMMEDIATELY AFTER INSTALLATION, TEST THE APPLIANCE BRIEFLY BY FOLLOWING THE INSTRUCTIONS
SHOWN BELOW. IN THE EVENT OF A MALFUNCTION, DISCONNECT THE APPLIANCE FROM THE MAINS AND
CONTACT YOUR NEAREST SERVICE FORCE CENTRE.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE.
EACH TIME YOU FINISH USING THE COOKING HOB, ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN "ZERO"
POSITION (OFF).
NEVER PUT INFLAMMABLE OBJECTS INTO THE OVEN:
MAY BREAK OUT.
MAINS SUPPLY.
OR AEROSOL CANS NEAR THE APPLIANCE AND DO NOT SPRAY NEAR THE BURNERS WHEN SWITCHED ON.
IN THE EVENT OF A FIRE: TURN OFF THE MAIN GAS SUPPLY AND DISCONNECT FROM THE
DO NOT THROW WATER ON BURNING OR FRYING OIL. DO NOT STORE INFLAMMABLE OBJECTS
SHOULD IT BE ACCIDENTALLY SWITCHED ON, A FIRE
DO NOT USE
SAUCEPANS THAT DO NOT HAVE A PERFECTLY SMOOTH, EVEN BASE ON THE HOB.
Warnings
DO NOT USE
THE RATING PLATE WITH THE TECHNICAL DATA, SERIAL NUMBER AND THE BRAND IS CLEARLY VISIBLE ON THE
BACK OF THE APPLIANCE.
THE PLATE MUST NEVER BE REMOVED.
THE APPLIANCE SHOULD ONLY BE USED BY ADULTS.
WITH THE APPLIANCE. DO NOT KEEP OBJECTS ON THE APPLIANCE THAT MAY ATTRACT CHILDREN'S
ATTENTION. KEEP CHILDREN AWAY FROM THE APPLIANCE; DO NOT FORGET THAT SOME PARTS OF THE
APPLIANCE OR THE PANS USED BECOME VERY HOT AND DANGEROUS DURING USE AND, AFTER SWITCHING
OFF, WHILE THE APPLIANCE IS COOLING. BE CAREFUL WITH PAN HANDLES: KEEP THEM TURNED INWARDS SO
THAT CHILDREN CANNOT OVERTURN THE PANS.
WHEN THE APPLIANCE IS DECOMMISSIONED, IT MUST BE DISPOSED OF IN A SUITABLE RECYCLING CENTRE.
ANY PAN OR ACCESSORY THAT EXCEEDS THE OUTER PERIMETER OF THE HOB.
DO NOT ALLOW CHILDREN TO APPROACH OR PLAY
The manufacturer declines any responsibility
for damage incurred by persons or objects
that is caused by not following the above guidelines or by tampering with any part of the
appliance or by using non-original spare parts.
2. General information
This product conforms to the requirements of the following European directives:
•
73/23/EEC
•
89/336/EEC
•
90/396/EEC
•
89/109/EEC
The above mentioned directives also conform to
2.1 Technical service
Before leaving the factory, this appliance has been tested and set up by qualified, specialist
personnel, so as to guarantee the best operating results. Each repair or adjustment that may
subsequently be necessary must be carried out with the utmost care and attention. We therefore
recommend always contacting the Dealer where the appliance was purchased or your nearest
Service Centre, specifying the type of problem and the appliance model.
for "Low Voltage".
for "Electromagnetic Disturbance".
for "Gas Appliances".
for "Material in contact with Food".
Machine directive 98/37/EC
.
Instructions for the user
3. Description of controls
3.1 The front panel
All the commands and controls for the cooking hob and oven are on the front panel.
THE CONTROL PANEL
DESCRIPTION OF HOB CONTROL KNOB
The flame is ignited by simultaneously pressing and turning the knob
anticlockwise to the low flame symbol .
To regulate the size of the flame, turn the knob to between the maximum and
minimum settings. Turn off the burner by returning the knob to position .
LAYOUT OF BURNERS – Description of symbols
REAR LEFTREAR RIGHT
CENTRE FRONTCENTRE REAR
FRONT LEFTFRONT RIGHT
Instructions for the user
DESCRIPTION OF FRY-TOP CONTROL KNOB
The fry-top is equipped with
surface can be used, or only one of the two halves, front or rear.
The knobs that regulate the energy individually control the temperature of the
two heating elements. A
LAYOUT OF HEATING ELEMENTS - Description of symbols
REARFRONT
adjustable heat settings
green light
indicates that the appliance is heating.
. The entire cooking
DESCRIPTION OF CERAMIC HOB CONTROL KNOBS
Besides the normal knobs that regulate the energy, the
ceramic hob is equipped with knobs for
heating
internal element, setting the knob to the symbol the
outer element also operates.
The electric oven is controlled by two knobs:
switch knob
choose the most suitable type of heating for different
cooking requirements, by switching on the heating
elements appropriately and setting the required
temperature from
. Settings from 1 to 11 control the heating of the
LAYOUT OF CERAMIC HEATING ELEMENTS - Description of symbols
REAR LEFTREAR RIGHT
FRONT LEFTFRONT RIGHT
CENTRAL
DESCRIPTION OF ELECTRIC OVEN KNOBS
and
thermostat knob
to
50°C
MAX (250°C
. They allow you to
differentiated
function
).
The V setting on the thermostat knob operates the oven fan.
Below the oven knobs there are two warning lights: the
orange light
and off to indicate when the thermostat switches on to maintain the temperature inside the oven at
the level set on the thermostat knob.
The oven has an
on while the oven is off, for cleaning purposes, by turning the function switch knob to the symbol
indicates that the preset temperature has been reached. The
internal light
. The light is always on while the oven is working: it can be switched
green light
signals the oven is working; the
orange light
switches on
Instructions for the user
DESCRIPTION OF SYMBOLS ON THE FUNCTION SWITCH KNOB
SWITCHES ON THE OVEN LIGHTGRILL-FAN ELEMENT
UPPER AND LOWER
HEATING ELEMENTS
UPPER HEATING ELEMENTHEATING ELEMENT-CONVECTION
LOWER HEATING ELEMENTDEFROST
GRILL ELEMENT
UPPER AND LOWER
HEATING ELEMENTS – FAN
DESCRIPTION OF AUXILIARY ELECTRIC OVEN KNOB
Some cooker models are equipped with an auxiliary electric oven with natural
convection, controlled by a single knob. This allows the user to choose the
most suitable type of heating for different cooking requirements, by switching
on the heating elements appropriately and setting the required temperature
(from 60 to
). Using the same knob it is also possible to set the functions
MAX
described in the table.
Below the auxiliary oven knob there is an
reached the set temperature. The
orange light
orange light,
switches on and off to indicate when the thermostat
which indicates when the oven has
switches on to maintain the temperature inside the auxiliary oven at the level set on the control
knob.
The auxiliary oven has an
internal light
. The light is always on while the oven is working: it can be
switched on while the oven is off, for cleaning purposes, by turning the function switch knob to the
symbol
.
DESCRIPTION OF SYMBOLS ON AUXILIARY ELECTRIC OVEN KNOB
SWITCHES ON THE OVEN LIGHTUPPER HEATING ELEMENT
60 - MAX
UPPER AND LOWER
HEATING ELEMENTS
LOWER HEATING ELEMENT
GRILL ELEMENT + SPIT
The end of cooking display and the control knobs for the main oven
have no effect on the operation of the auxiliary oven.
Instructions for the user
THE ELECTRONIC TIMER
KEY
A
COOK TIME
B
END TIME
C
COUNTDOWN
D
TIME
E
DECREASE CONTROL
F
SELECTOR CONTROL
G
INCREASE CONTROL
The time of day must be set before the main oven
will operate manually.
SET THE TIME OF DAY
The oven has a 24 hour clock.
When the electricity supply is first switched ON, the
display will show 12.00 and the 'Time' (
neon will flash as Fig. 1.
To set the correct time press the increase control
button (+) and if necessary, the decrease control
button (-) until the correct time on the 24 hour clock
is reached, e.g. 10.00 a.m. as Fig. 2. The 'Time'
indicator (
) neon will flash for 5 seconds and then
go out.
) indicator
The increase and decrease control buttons operate
slowly at first, and then more rapidly. They should be
pressed separately.
HOW TO SET THE COUNTDOWN
The 'Countdown' gives an audible reminder at the
end of any period of cooking. This cooking period
may be up to 2 hrs 30 mins. It is not part of the
automatic control.
To set, press the Selector Control button (
the 'Countdown' indicator is illuminated (
) until
) the
display reads 0.00 as Fig. 3.
To set the correct time duration depress the
increase control (+) until the display indicates the
interval to be timed, e.g. 1hr 45 mins as Fig. 4. If
necessary depress the decrease control (-) to
achieve the correct time interval.
This must be completed within 5 seconds of first
pressing the Selector Control button.
During the operation of the 'Countdown', the
remaining time period will be shown in the display.
The 'Countdown' will sound intermittently for up to 2
minutes at the end of the timed period. The sound
can be stopped by pressing any button.
Instructions for the user
TO CANCEL THE COUNTDOWN
If you change your mind and want to cancel the
'Countdown', press the Selector Control button until the
'Countdown' indicator (
control (-) until 0.00 shows in the display as Fig. 5. The
'Countdown' indicator (
seconds and then return to the time of day.
SETTING THE OVEN TIMER CONTROL
The main oven can be automatically timed.
When using the timer control for the very first time, it is
advisable to let it operate while you are at home. The
displays can be checked to show that it is operating
correctly and you will feel confident to leave a meal to
cook automatically in the future.
#
TO SET THE TIMER TO SWITCH ON AND OFF
AUTOMATICALLY
i) Ensure the electricity supply is switched ON and that
the correct time of day is displayed, e.g. 9 a.m. as
Fig. 6.
ii) Place food in oven.
iii) To set the length of cooking time, press the Selector
control button (
illuminated (
the required length of cooking time is displayed, e.g.
2 hrs 15 mins as Fig. 7. If necessary depress the
decrease control (-) until the correct time interval is
achieved.
The maximum cooking time is 10 hours.
iv) Release the buttons. The 'Cook Time' indicator (
will be illuminated.
). Press the increase control (+) until
) flashes and then the decrease
) will continue to flash for a few
) until the 'Cook Time' indicator is
)
Remember, this must be completed within 5 seconds of
first pressing the Selector Control button.
v) To set the 'End Time'. Press the Selector Control
button until the 'End Time' (
increase control (+) until the required stop time is
displayed, e.g. 12.15 p.m. as Fig. 8. If necessary
depress the decrease control (-) until the correct
time interval is achieved.
vi) Release the buttons. The time of day will be
displayed after 5 seconds. The 'Cook Time' (
'End Time' (
The 'End Time' must not be more than 23 hours 59
minutes from the time of day. For example, if the
time of day is 09.00 a.m., the latest 'End Time' would
be 08.59 a.m. the next day.
vii) Set the main oven control to the required
temperature. The oven indicator neon should be OFF.
When the automatic timed period starts, the oven
indicator neon will turn ON and OFF periodically during
cooking, showing that the temperature is being
maintained.
) indicators will be illuminated.
) flashes. Press the
) and
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.