AEG 78031KF-MN, 78031KF-MN 64V User Manual

78031KF-MN

User manual Ceramic glass induction

hob

Contents

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe plac e. An d p le as e pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating the appliance 2

Safety Information 2 Description of the appliance 4 Operating the appliance 6 Tips on cooking and frying 12 Cleaning and care 14

What to do if ... 14 Disposal 16

Installation instructions 17

Safety information 17 Service 19

Subject to change without notice

Operating the appliance

Safety Information

WARNING!

Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

Safety Information

• To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered service engineers.

• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric shock.

• Repairs to the appliance must only be carried out by trained registered service engineers.

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at least 30 cm from induction cooking zones that are switched on.

• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cookware.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.

• The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered.

Description of the appliance

Cooking surface layout

56 34

1 Induction cooking zone 2300W, with power function 3200W 2 Induction cooking zone 2300W, with power function 3200W 3 Control panel 4 Induction cooking zone 2300W, with power function 3200W 5 Induction cooking zone 2300W, with power function 3200W

6 Control panel

The cooking surface is divided into four cooking zones. In each cooking zone under the glass ceramic is an induction heating element, the middle of each one being marked with a cross on the glass ceramic surface. Cookware can be placed on any of the cooking zones. But the cross must be completely covered by the cookware. The bottom of the cookware must be from 125 - 210 mm in diameter.

Cooking over two cooking zones

Large cookware can be heated with two cooking zones simultaneously. Either the two cooking zones on the left-hand side or on the right-hand side of the cooking surface are suitable for this.

1. Place cookware centrally on the two zones.

The cookware must cover at least two crosses.

2. Set the same heat setting for the two cooking zones (max. setting 8).

With different cookware there can be differences in the heat distribution. Good cooking results can be achieved with cookware with thick, flat bottoms.

Control panel layout

1 Child lock with a pilot light

2 Stop+Go with a pilot light

3 On/Off with indicator

4 Heat setting indicator

5 Power function

6 Heat setting selection

7 Timer

8 Timer display

9 Cooking zone indicators - Timer function

Description of the appliance

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor fields which activate a desired function. Do not cover other sensor fields.

If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance switches itself off.

Sensor field Function

On / Off Switches appliance on and off

Child lock Locking control panel for children

STOP+GO To switch the Keep Warm setting on/ off

Power Switching the power function on and off

Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

Operating the appliance

Displays

Display Description

The cooking zone is switched off

Keep Warm settings Keep Warm / STOP+GO function is switched on

+ digit

Heat settings To set heat settings

Auto Warm-up The Auto Warm-up function is switched on

Fault Malfunction has occurred

Pan detection Cookware is unsuitable or too small or no cookware

has been placed on the cooking zone

Residual heat Cooking zone is still hot

Child safety device Lock/Child safety device is set

Power Power function is switched on

Automatic Switch off Switch off is active

Residual heat indicator

WARNING!

Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator

Residual heat can be used for melting and keeping food warm.

The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the residual heat of the cookware.

Operating the appliance

Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

Control panel Display Pilot light

Switch on

Switch off

Touch for 1 second /

Touch for 1 second / none

After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

lights up.

goes out.

+ 14 hidden pages