AEG 16810 User Manual

LAVAMAT TURBO 16810

The environmentally friendly washerdryer

Экологичная стиральносушильная машина

Instruction booklet

Руководство по эксплуатации

AEG

AUS ERFAHRUNG GUT

Contents

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Tips for environmental protection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Main features of your washer-dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Programme selector dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

START/PAUSE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

DELAY START button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

ELECTRONIC DRYING buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

DRYING TIME button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Programme Option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

STAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

QUICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

SOAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

PREWASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

SPIN SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

RINSE HOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Programme progress display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Cancelling a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Altering a programme which is running . . . . . . . . . . . . . . . . . . . . . . . . . 16

Opening the door after the programme has started. . . . . . . . . . . . . . . . 16

Detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Before the first wash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Preparing the wash cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Sorting out and preparing the laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Weight of laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Types of fabric and care labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Detergents and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Which detergent and additive? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

How much detergent? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Liquid detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Adding a water softener (descaling product) . . . . . . . . . . . . . . . . . . . . . . . . 21

Information on water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3

Dear customer,

Please read these operating instructions carefully and pay particular
attention to the safety notes indicated in the first pages. We recom­mend that you keep this instruction booklet for future reference and
pass it on to any future owners.

The warning triangle and/or the key words (Warning!, Caution!) empha­size information that is particularly important for your safety or correct
functioning of the appliance.

This symbol guides you, step by step, in the operation of the appliance.

The information marked with this symbol provides additional instruc­tions and practical tips on the use of the appliance.

Tips and information about economical and ecological use of the
machine are marked with the clover symbol.

Should any problems arise, this booklet provides instructions on how to
solve them by yourself; see section “Something not working?”.

If this information is not sufficient, please contact our nearest SERVICE
CENTRE.

Printed on recycled paper.

People who think ecologically, act accordingly…

2

Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Instructions for installation and electrical connection. . . . . . . . . . . . . . 44

Safety instructions for the installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Front view and side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Water drainage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Permanent connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

5

Contents

Preparing the drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Garments not suitable for drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Drying symbols on garment labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Duration of the drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Modification of the drying time or degree of drying. . . . . . . . . . . . . . . . . . 23

Fibre residue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Additional drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

How to dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Drying only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

How to wash

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Add detergent and additive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selection of the desired wash programme . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Selection of the desired options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Selection of the SPIN SPEED or RINSE HOLD option . . . . . . . . . . . . . . . . . . 26

Selection of the EXTRA RINSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Selection of the DELAY START option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Starting the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

At the end of the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Automatic washing and drying (NON-STOP programme). . . . . . . . . . . . 29

Programme charts: wash and special programmes . . . . . . . . . . . . . . 30-31

Programme chart: timed drying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Consumption data for timed drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

After each wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Periodical cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Dr ain pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Emergency emptying out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Frost precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Something not working?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40

Unsatisfactory washing results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

4

Contents

Child safety

• Children are often not aware of how dangerous electrical appliances
can be. When the machine is working, children should be carefully
supervised and not be allowed to play with the appliance - there is a
risk that they could become trapped inside.

• The packaging components (e.g. plastic film, polystyrene) can be dan­gerous to children - danger of suffocation! Keep them out of chil­dren’s reach.

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not climb into the drum.

• When the appliance is to be scrapped, cut off the electrical supply
cable and destroy the plug with the remaining cable. Disable the door
catch in order to prevent children from becoming trapped inside
while playing.

Proper use

• This appliance is designed for domestic use only. If the machine is
used for any other purposes or is not used correctly, the manufactur­er accepts no responsibility for any damage that might occur.

• For safety reasons, the appliance must not be modified.

• Use only detergents suitable for washing machines and follow the
manufacturer’s instructions.

• Garments which have been in contact with flammable solvents
should not be machine washed.

• Do not use your machine for dry cleaning.

• Dyes and bleaching agents may only be used if specifically permitted
by the manufacturer of these products. We cannot be held responsi­ble for any damage.

• Always unplug the appliance and turn off the water tap after use.

7

Safety instructions

The safety of AEG appliances complies with the industry standards and
with legal requirements on the safety of appliances. However, as man­ufacturers, we feel it is our duty to provide the following safety notes.

General safety

• Repairs to the machine must be carried out only by qualified person­nel. Repairs carried out by inexperienced persons could cause serious
danger. Contact your local AEG Service Centre.

• Never start the machine if the electrical supply cable is damaged or
the control panel or worktop are so damaged that inner components
can be reached.

• Unplug the appliance before carrying out any cleaning or mainte­nance operations.

• Never pull the power supply cable to remove the plug from the sock­et; always take hold of the plug itself.

• Never spray the machine with a jet of water. Danger of electric shock!

• During high temperature wash programmes and during the drying
cycle the door glass may get hot. Do not touch it!

• Let the water cool down before carrying out emergency emptying or
before opening the door in an emergency.

• Small animals can gnaw electric wires and water hoses causing elec­trocution hazard and damage due to water leaks.

Positioning, connection, starting up

• Follow the instructions for positioning and connection.

• Carry out a first wash without laundry (COTTONS 60, with half the
amount of detergent) in order to remove any manufacturing residue
from the tub and the drum.

• Should the machine be purchased in winter, when temperatures can
be below 0°, leave the appliance for 24 hours at ambient temperature
before starting it.

6

Safety instructions

Main features of your washer-dryer

• Programme and temperature setting using the programme selector.

• Stain programme for effectively treating stained washing.

• Energy saving programme for normally soiled cotton items.

• Speed for the final spin can be reduced to 1200, 900, 700 or 400
rpm.

• RINSE HOLD: the laundry is left immersed in the final rinse water to
prevent creasing.

• Delay timer: programme start can be delayed by 1 to 19 hours (e.g.
to times with a more economical power rate).

• Programme progress display showing the programme steps selected
and the programme phase which is running.

• Because of its gentle washing action, the special wool cycle washes
your garments with extreme care.

• The drying programmes will enable you to have dry and soft laun­dry in a short time.

• 3-compartment drawer for detergent and fabric softener.

• Unbalance detection device: to prevent vibration during spinning.

9

Disposal

Packaging materials

The materials marked with the symbol are recyclable.

>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene

This means that they can be recycled by disposing of them properly in
appropriate collection containers.

Machine

Use authorised disposal sites for your old appliance. Help to keep your
country tidy!

Tips for environmental protection

To save water, energy and to help protect the environment, we recommend
that you follow these tips:

• Normally soiled laundry may be washed without prewashing in order
to save detergent, water and time (the environment is protected too!).

• Use the energy saving programme when washing normally soiled garments.

• The machine works more economically if it is fully loaded (for both
washing and drying cycles).

• When small loads are washed, use only half to two thirds of the rec­ommended amount of detergent.

• The machine will consume less energy if the laundry is adequately
spun before being dried.

• With adequate pre-treatment, stains and limited soiling can be
removed; the laundry can then be washed at a lower temperature.

• If the water has a medium or high degree of hardness (starting from
hardness degree II, see “Detergents and additives”) water softeners
must be added.
The amount of detergent can then be adjusted to hardness degree I (= soft).

8

11

Description of the appliance

Front view

10

Control panel

A = Option buttons
B = Spin speed button
C = Electronic drying button
D = Display
E = START/PAUSE button
F = Delay start button
G = Drying time button
H = Programme progress display
J = Programme selector dial

Programme selector dial

The programme selector determines the type of washing cycle (e.g. water
level, drum movement, number of
rinses), the washing temperature and
enables the required drying pro­gramme to be selected according to
the type of laundry.

The selector dial is divided into 5 sec­tions:

• Cottons

• Synthetics

• Delicates

• Wool (hand washing)

• Special programmes

• Reset programme / OFF position
The selector dial can be turned either clockwise or anticlockwise.

J

BE

ADCFGH

Description of the appliance

Detergent drawer

Control panel

Door

Adjustable feet

Drain pump

1312

Description of the appliance Description of the appliance

Position corresponds to the ENERGY SAVING programme at
approx. 67°C for normally soiled laundry, extended washing time (can­not be combined with QUICK ).

Position at 40°C = Easy to iron.
In this position the laundry is gently washed and spun to avoid any
creasing. In this way ironing is easier.

Position = cold wash
Position = drying

START/PAUSE button

This button has three functions:

a) Start
After having selected the required programme, press this button to start

the machine. If you have selected the DELAY START option ,
the machine starts its hourly countdown.

b) Pause
To interrupt a programme which is running, press the START/PAUSE

button: the information on the display starts to flash.
To restart the programme from the point at which it was interrupted,

press the START/PAUSE button again.
c) Empty out water

At the end of a programme which ends with water in the drum (RINSE
HOLD option), press the START/PAUSE button to empty out the
water: the machine will empty and spin.

DELAY START button

The wash programme can be delayed from 1 hour up to a maximum of
19 hours.

The button must be pressed after selecting the programme and
before pressing the START/PAUSE button.

The figures indicating the delay appear for about 3 seconds in the dis­play. The duration of the selected wash programme is then displayed.
After depressing the START/PAUSE button, the machine starts its hourly
countdown.

To alter or cancel the preset delay, press the START/PAUSE button, then
press the DELAY START button until the required time is displayed or, if
you wish to cancel the delay, until the symbol 0 h is displayed.

Then press the START/PAUSE button again.

When the delay is cancelled, the display shows the duration of the wash
programme previously selected.

ELECTRONIC DRYING button

By means of this button you can choose the required degree of drying
for cottons and synthetics:

- Store dry

- Iron dry (not for synthetics)
The drying time is automatically adjusted by the machine: the laundry

will be dried to the selected degree of dryness.

DRYING TIME button

If you wish to carry out a timed programme instead of an electronic pro­gramme push the button until the drying time you want appears in the
display according to the fabrics (cotton or synthetics) you have to dry.

For COTTON you can select a drying time from 10 minutes to 130 minutes.
For SYNTHETICS you can select a time from 10 minutes to 100 minutes.

Programme Option buttons

Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.

When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.

STAIN

To treat heavily soiled or stained laundry with stain remover (extended main
wash with time optimised stain action phase, not selectable for wool or pro­grammes with temperatures lower than 40°C).
This function cannot be used with QUICK , SOAK and
PREWASH .

QUICK

By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.

This option is not available with the cotton

50°C,

wool and economy

programme and cannot be used with STAIN .

To empty out water:

• press the START/PAUSE button: after emptying, the machine performs
the spin cycle required for the type of wash selected;

• select the spin speed and then press START/PAUSE;

• select the DRAIN programme to empty out the water without
spinning.

Warning! The programme selector dial must be turned first to OFF and
then to the DRAIN programme.

If the water is not emptied out, the machine automatically empties
itself after 18 hours.

The RINSE HOLD option cannot be selected for the automatic WASHING &
DRYING programme.

Display

The display shows the following information:

• Duration of the selected programme (in minutes), calculated auto­matically on the basis of the maximum recommended load for each type
of fabric.

• Selected drying time (max. 130 minutes for cotton, 100 minutes for
synthetics).

After the programme has started, the time remaining is updated every
minute.

• When the programme has finished, a steadily lit zero is displayed.

• Delayed start, (19 hours max.) programmed using the special button

. The countdown is updated every hour.

• Alarm code indicating a fault in the machine operation (see page 37).

Programme progress display

By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.

After the machine has started, only the running
phase pilot light stays on. When the programme
has finished, the END pilot light comes
on.

15

SOAK

The machine performs a soak of about 30 minutes at 30°C. By pressing
the DELAY START button the soak time can be prolonged up
to 10 hours max. After this time the wash cycle will automatically start.
This function cannot be used with WOOL , PREWASH or
STAIN programme.
The soak programme ends with a short spin in programmes for Cotton and
Synthetics, and with emptying of the water without spinning for Delicates.

PREWASH

The machine performs a prewash cycle at 30°C max. The prewash cycle
ends with a short spin in programmes for Cotton and Synthetics, and
with emptying of the water without spinning for Delicates.

This option is not available with the wool programme and cannot be
used with SOAK and STAINS .

For use when washing heavily soiled laundry.

Important: By depressing at the same time buttons and
the machine will perform an extra rinse (see page 27)

By depressing at the same time buttons and the
acoustic signal at the end of programme is suppressed.

SPIN SPEED

Press this button to reduce the maximum speed of the final speed
proposed by the machine for the selected programme or to select
option (RINSE HOLD).
The maximum spin speed for cotton is 1600 rpm, for syn­thetics and wool 900 rpm and for delicates 700 rpm.

RINSE HOLD

By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the pilot light (END) on the programme progress display illu­minates to indicate that the water must be emptied out. The door is
locked.

14

Description of the appliance Description of the appliance

PREWASH

MAIN WASH

RINSES

EXTRA RINSE +

SPIN

DRYING

END

OVERDOSAGE

Detergent dispenser drawer

Compartment for prewash or soak detergent and stain remover. The prewash
or soak detergent is added at the beginning of the wash programme. The
stain remover is added during the STAIN-Action phase in the main wash.

Compartment for powder or liquid detergent used for main wash.
It is emptied at the beginning of the wash cycle.

Compartment for liquid additives (fabric softener, starch).
It is emptied at the last rinse.

The quantity of additives must not exceed the “MAX” mark in the
drawer.

Before the first wash

Before your first wash, we recommend that you run a cotton cycle at
60°C, without any laundry in the machine, to remove any manufac-
turing residue from the drum and tub.

Pour 1/2 a measure of detergent into the dispenser drawer and start the
machine.

17

When the programme has finished, if the OVERDOSAGE
light comes on, it indicates that too much detergent has been used or
that the drain filter is blocked.

Cancelling a programme

To cancel a programme which is running, turn the programme selector
dial to the OFF position.

Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to OFF and
then to the DRAIN programme .

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the
START/PAUSE button.

Any function can be modified before the machine starts it. After select­ing the new option press the START/PAUSE button again to
re-start the selected programme.

To modify the selected programme turn the programme selector dial to
O and then choose a new programme.

The water is not emptied out and after pressing the START/PAUSE but­ton again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the START/PAUSE
button.
The door can be opened if:

• the machine is not already heating or drying;

• the water level is not above the bottom edge of the door;

• the drum is not turning.
The light on the control panel indicates if the door can be

opened:

• green light: the door can be opened;

• unlit light: the door cannot be opened;

• flashing red light: the door is open.

16

Description of the appliance Description of the appliance

Weight of laundry

Types of fabric and care labels

The labels on garments help you to select the most suitable wash pro­gramme. The laundry should be sorted out according to the type of fab­ric and the instructions indicated on care labels.

Temperatures indicated on labels are always maximum temperatures.

Cotton

Linen and cottons marked with this symbol can be washed at high tem­peratures.

Cotton

Linen and cottons marked with this symbol are colourfast and can be
washed at 60°C.

Cotton

Garments marked with these symbols have delicate colours, therefore
the washing temperature must not exceed these values.

Synthetics

Mixed and synthetic fabrics marked with these symbols require a gentle
wash programme and they must therefore be washed using the specific
programme.

60

40
30

406095

19

Preparing the wash cycle

Sorting out and preparing the laundry

• Sort out the laundry according to type of fabrics and care labels (see
“Types of fabric and care labels”).

• Empty pockets.

• Remove any metal parts (safety pins, clips, etc.).

• To prevent the laundry from getting damaged and forming bundles,
it is advisable to close zips, button up pillowcases and quilt covers and
tie up loose straps such as those of aprons.

• Turn double faced items inside out (sleeping bags, anoraks, etc.)

• Turn coloured knitted fabrics, woollens and fabrics with trim inside
out.

• Wash small and delicate items (baby socks, tights) inside a laundry net
or in a pillow case closed with a zip, or in larger socks.

• Treat curtains with special care. Remove all metal or plastic hooks or
put them in a net or a bag. We take no responsibility for any damage.

• Whites and coloureds must be washed separately: white items can
loose their whiteness.

• New coloured fabrics often have excess dyes; it is advisable to wash
them separately for the first time.

• Wash small and large items together; this improves the washing result
and the laundry is better distributed during spinning.

• Shake out garments before putting them into the machine.

• Insert each garment separately.

18

Sort of laundry

Preparing the wash cycle

Approximate

dry weights

1200 gBathrobes

300-600 gWork shirts

700 gQuilt covers

500 gSheets

100 gBlouses

200 gHand towels

100 gTea towels

200 gShirts

200 gPillowcases

200-250 gNight-gowns/Pyjamas

200-300 gTablecloths

250 gUnderwear

21

Delicates

Microfibres, synthetics or curtains marked with these symbols require a
very gentle treatment.
The DELICATES programme is suitable for this type of fabric.

Woollens and particularly delicate items

Fabrics such as wool, wool mix or silk marked with this symbol are par­ticularly sensitive to machine washing.
The WOOL programme is suitable for this type of fabric.

The wool wash cycle of this machine has been approved by Woolmark
for the washing of machine washable Woolmark products provided that
the garments are washed according to the instructions on the garment
label and those issued by the manufacturer of this machine. M9605.

If the label has the symbol (do not wash), the garments must not
be machine washed!

304030

40

20

Preparing the wash cycle

Detergents and additives

Which detergent and additive?

Use only detergents and additives for washing machines. Follow the
manufacturer’s instructions.

How much detergent?

The quantity depends on:

• the load:
if the manufacturer does not provide any indications on the amount of
detergent for small loads, use about one third less than the suggested
amount for half loads and half the amount for very small loads;

• the degree of soil:
use a small amount of detergent for lightly soiled garments. Judge
the amount according to the detergent manufacturer’s instructions
and size of the load;

• the water hardness:
the harder the water, the more detergent required. Instructions
according to water hardness are given on the detergent pack.

Liquid detergent

Liquid detergent can be poured directly into the main wash compartment
of the dispenser drawer immediately before starting the programme, or
a special dispenser can be used that is placed directly in the drum. Mea­sure the detergent according to the manufacturer’s instructions.

Adding a water softener (descaling product)

A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s
instructions. The quantity of detergent can then always be adjusted to
degree of hardness I (= soft). Information on water hardness can be
obtained from your local water supply authority.

Information on water hardness

Preparing the wash cycle

Degree of hardness French degrees °TH

0-15

German degrees °dH

0-7I=Soft

16-257-14II=Medium

26-3714-21III=Hard

more than 37more than 21IV=Very hard

Drying symbols on garment labels

Always look at the garment label to check whether garments can be
machine dried.

The following symbols refer to drying:

Machine drying is usually possible

Normal drying (normal temperature)

Gentle drying (reduced temperature)

Do not machine dry

Duration of the drying cycle

The drying time can vary according to

• the final spin speed;

• the required degree of drying (store dry or iron dry);

• the type of laundry;

• the size of load.

The usual drying times for the timed programmes are indicated in the
programme chart. As you become more familiar with the appliance, you
will discover the drying times that best suit your needs according to the
various type of fabric. It is a good idea to make a note of these times.

Modification of the drying time or degree of drying

If you wish to modify the drying time or the degree of drying when a dry­ing programme is running, first depress START/PAUSE button to set the
machine to PAUSE. After modifying the time or degree, depress
START/PAUSE again to continue the programme.

Fibre residue

After drying fluffy fabrics, such as new towels, it is advisable to perform
the RINSE programme to be sure that any residue that may
remain in the tub is completely removed and does not stick to garments
dried afterwards.

23

Preparing the drying cycle

As a dryer, the machine works on the condensation principle.
Therefore, the water tap must be open and the drain hose must

drain water into a sink or into the drain pipe, even during the dry­ing cycle.

Load

Warning:

Loads of washed laundry exceeding these values must be divided
before being dried, otherwise poor results will be obtained.

Garments not suitable for drying

• Particularly delicate items such as synthetic curtains, woollen and silk,
garments with metal inserts, nylon stockings, bulky garments such as
anoraks, bedcovers, quilts, sleeping bags and duvets must not be
machine dried.

• Garments padded with foam-rubber or materials similar to foam­rubber must not be machine dried; they represent a fire hazard.

• Also, fabrics containing residues of setting lotions or hair sprays, nail
solvents or similar solutions must not be machine dried in order to
avoid the formation of harmful vapours.

22

Preparing the drying cycle

Sort of laundry

Rated load

(dry weight)

3 kgLinen and cottons

2 kgSynthetics

25

Additional drying

Should the laundry still be too wet at the end of the programme, set
another short drying time.

Warning! To prevent the formation of creases or shrinking of fab­rics, avoid excessive drying.

How to dry

Drying only

Rated load

- cottons 3 kg

- synthetics 2 kg

During the drying programme the water tap must be open and the
drain hose must be correctly positioned.

Turn the programme selector dial to (DRYING) for cottons

or synthetics .
If you wish to carry out the timed drying press the button
until the time you want appears in the display.

If you wish to carry out the electronic drying depress the relevant button
until the light corresponding to the degree of dryness required (store dry

or iron dry ) illuminates.

Press the START/PAUSE button to start the programme.
At the end of the cycle turn the programme selector dial to OFF and

remove the laundry.

24

Preparing the drying cycle

How to wash

Rated load

- cottons 6 kg

- synthetics and delicates 3 kg

- wool 2 kg

Load the laundry

Open the door.
Place the laundry in the drum, one item at a time. Distribute laundry as

evenly as possible. Close the door.

Add detergent and additive

Pull the drawer
out till it stops.

Pour the main
wash detergent
into compart­ment .

If you wish to
perform a pre­wash, a SOAK or
a STAIN-Action programme, pour detergent or stain remover into com­partment .

Important!
Do not use normal detergent for the STAIN-Action programme,
always use a STAIN remover.

Pour the fabric softener into compartment without exceeding the
“MAX” mark.

Close the drawer gently, pushing it fully in.

EXTRA RINSE

This appliance is designed for saving water. However, for people with
a very delicate skin (allergic to detergents) it may be necessary to
rinse the laundry using an extra quantity of water (extra rinse).

The extra rinse is available only with the cotton, synthetics or delicate
programme.

Selection of the EXTRA RINSE option

Press simultaneously the buttons and for about 3
seconds: the light
comes on in the programme progress display.
This function stays permanently on. To remove it press the same but­tons again until the light goes off.

Selection of the DELAY START option

To delay starting of a programme, press the
DELAY START button before starting
the machine. The figures corresponding to the
selected delay will be displayed for about 3 sec­onds, after which the duration of the selected
programme will appear on the display.

If the button (SOAK) has been pressed the selected delay will
correspond to the soak time. If no delay time is selected the soak pro­gramme will last about 30 minutes.

When the START/PAUSE button is pressed, the selected delay will
appear again on the display and the machine starts its countdown.

2726

How to wash How to wash

Selection of the desired wash programme

Turn the programme selector dial
to the desired position: the lights
corresponding to the different
phases making up the selected
programme light on.
The display shows the duration of
the programme.

Selection of the desired options

depending on the degree of soil of the
laundry. The corresponding light comes on.

Selection of the spin speed or RINSE HOLD option

It is possible to select a lower spin speed by means of
the relevant button; the light corresponding to the
selected speed comes on.

Selecting option (RINSE HOLD) the laundry is left
immersed in the final rinse water.

If the spin speed is not reduced , the final spin speed will be as follows:

- cottons 1600 r.p.m.

- synthetics 900 r.p.m.

- delicates 700 r.p.m.

- wool (hand washing) 900 r.p.m.

PREWASH

SOAK

QUICK

STAIN

15

ing to amount, type, degree of soil of fabrics and water hardness.

This light could come on also when the drain filter is blocked.

If the RINSE HOLD option has been selected, the water must
be emptied out before opening the door either

- by pressing the START/PAUSE button (the laundry will be spun at the
speed corresponding to the selected type of fabrics. The spin speed
can be reduced by means of the SPIN SPEED button)

- or by selecting the spin speed and then pressing START/PAUSE

- or by turning the selector dial to OFF and then to DRAIN and
pressing the START/PAUSE button again. In this case the water will be
emptied, but the laundry is not spun.

Turn the selector dial to OFF.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items

being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.

Close the water tap.
Leave the door open to prevent the formation of mildew and unpleasant

smells.

Automatic washing and drying

(NON-STOP programme)

Warning! For NON-STOP programmes, it is also essential not to exceed

the load sizes of 3 kg for cotton and 2 kg for synthetics.

Do not use dosing device/ball when carrying out a NON-STOP pro­gramme. The plastic material with which it is made cannot withstand
the high temperature in the drum during drying.

Load the laundry.
Add detergent and additive.
Select the wash programme.

Select eventually the required options by means of the relevant buttons.
If possible, do not select a spin speed lower than that proposed by the
appliance to avoid a too long drying time so saving energy.
By automatic washing and drying it is not possible to select a spin speed
lower than 900 r.p.m. for cottons and 700 r.p.m. for synthetics (with
timed drying).

Select the drying time or degree of drying.
Start the programme by depressing the START/PAUSE button.
At the end of the programme, turn the selector dial to OFF.
Remove the laundry.

29

How to wash

Starting the programme

1. Check that the water tap is open.

2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the
programme will start at the end of the count­down.
If the door light is red and flashing at the start of the pro­gramme it indicates that the door is open. Close the door and press
the START/PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to modify or cancel the
delay time.

• Load other laundry: press the START/PAUSE button. Open the door.

Load the laundry. Close the door and press the START/PAUSE button
again.

• Modify or cancel the delay time: press the START/PAUSE button.

Press the DELAY START button until the time required
appears on the display, or 0h, if you wish to cancel it. Press the
START/ PAUSE button again.

Programme progress display

By selecting the wash programme, the pilot lights corre­sponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.

Display

The time to the end of the programme decreases minute
by minute and appears on the display.

At the end of the programme

The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The END light comes on in
the programme progress display.

If the light (OVERDOSAGE) comes on it indicates that too
much detergent has been used. At the next wash carefully follow the
detergent manufacturer’s instructions. Measure out detergent accord-

28

How to wash

150

PREWASH

MAIN WASH

RINSES

EXTRA RINSE +

SPIN

DRYING

END

OVERDOSAGE

Programme chart

Special programmes

* The consumption data shown on this chart is to be considered purely

indicative, as it may vary depending on the quantity and type of laundry,
on the inlet water temperature and on the ambient temperature.

3130

Programme

Descrip-

tion

Programme phases

Additional

functions

Rated

load

A

Gentle

rinses

This pro­gramme can
be used for
rinsing hand
washed gar­ments.

3 rinses with liquid
additive.
Short spin.
(700 rpm max)

EXTRA RINSE
RINSE HOLD
SPIN SPEED

6 kg

B

Softeners

Hand washed
garments to
be starched
or softened.

1 rinse with liquid
additive.
Long spin.

RINSE HOLD
SPIN SPEED

6 kg

C

Drain

For emptying
out the last
rinse water in
programmes
with the Rinse
Hold option

The water is emptied
out.

/

D

Spin

Separate spin
for cottons.

Long spin.

SPIN SPEED

6 kg

F

Short spin

Separate spin
for synthetics
and delicate
fabrics.

Short spin.
(700 rpm max)

SPIN SPEED

3 kg

Energy

kWh

0.025

Water

lt.

52

20

/

Duration

min.

23

22

3

12

4

OFF

Reset

For cancelling the
programme which
is running or to
switch the machine
off.

Consumption*

Programme chart

Wash programmes

* The consumption data shown on this chart is to be considered purely indica-

tive, as it may vary depending on the quantity and type of laundry, on the inlet
water temperature and on the ambient temperature. It refers to the highest tem­perature for each wash programme.

Wash

programme

White

Cottons

Temp.

95°-60°

Fabrics

Cotton and linen,
for example nor­mally soiled work
garments, sheets,
household linen,
underwear, towels.

Additional

functions

STAIN
SOAK
QUICK
PREWASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED

Rated

load

6 kg

E

Whites

ECONOMY

60°

Cotton and linen, for
example normally to
lightly soiled sheets
and household linen.

STAIN
SOAK
PREWASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED

6 kg

Coloured

cottons

60°-50°
40°-30°

Coloured cotton or
linen fabric, shirts,
underwear, towels.

STAIN
SOAK
QUICK
PREWASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED

6 kg

Synthetics

60°-50°

40°

Synthetic fabrics,
underwear,
coloured garments,
non-shrink shirts,
blouses.

STAIN
SOAK
QUICK
PREWASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED

3 kg

Delicates

40°-30°

COLD

Delicate fabrics, for
example curtains.

STAIN
SOAK
QUICK
PREWASH
EXTRA RINSE
RINSE HOLD
SPIN SPEED

3 kg

Wool

40°-30

COLD

Wool, wool mix­tures, silk.

RINSE HOLD
SPIN SPEED

2 kg

Energy

kWh

2.0

1.60

1.14

1.0

0.55

0.4

Water

lt.

55

52

52

55

60

63

Duration

min.

161

153

137

96

67

58

Consumption*

Consumption data for timed drying

The values shown in the chart have been obtained in laboratory tests.
They may vary when the appliance is used at home, but they can be
used as indicative values.

33

Programme chart

Timed Drying

(*) The STORE DRY drying programme for cotton is the reference programme
for the Energy Label data, in compliance with standard EEC 92/75.

32

Degree of drying Spin speed

Rated

load

Water

litres

Energy

kWh

Duration

minutes

Cotton
Store dry

1600 3 kg 19 1.85 70-80

Cotton
Iron dry

1600 3 kg 15 1.4 50-60

Synthetics
Store dry

900 2 kg 20 1.2 70-80

Degree of drying Type of fabric Rated load Spin speed

Drying time

mins

Store dry (*)
Suitable for items to
put away without
ironing

Iron dry
Suitable for ironing

Cotton and
linen (towels,
T-shirts,
bathrobes)

3 kg 1600 70-80

1.5 kg 1600 35-45

Synthetics and
mixed fabrics
(jumpers,
blouses,
underwear,
household
linen)

2 kg 900 70-80

1 kg 900 35-45

Cotton and
linen (sheets,
tablecloths,
shirts, etc.)

3 kg 1600 50-60

1.5 kg 1600 30-40

Door seal

Check from time to time the door seal and
eliminate eventual possible objects that could
be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if
the machine does not empty and/or spin

the machine makes an unusual noise during draining due to objects
such as safety pins, coins etc. blocking the pump.

Proceed as follows:
Disconnect the appliance.
If necessary wait until the water has cooled down.

Open the pump door.
Place a container

close to the
pump to collect
any spillage.

Release the
emergency emp­tying hose, place
it in the contain­er and remove its
cap.

When no more water comes out, unscrew the pump and remove it.
Always keep a rag nearby to dry up spillage of water when removing
the pump.

Remove any
objects from the
pump impeller by
rotating it.

Put the cap back
on the emergency
emptying hose
and place the lat­ter back in its
seat.

Screw the pump fully in.
Close the pump door.

3534

Cleaning and maintenance

Cleaning and maintenance

After each wash

At the end of the wash programme, pull the dispenser drawer out a lit­tle to let it dry.

Leave the door ajar to allow air to circulate.

If the machine is not used for a prolonged period:

Close the water tap and unplug the appliance.

Periodical cleaning

Exterior

Clean the outside of the cabinet with soap and water only. Rinse with
clean water and dry.

Important: do not use methylated spirits, solvents or similar products
to clean the cabinet.

Detergent dispenser drawer

After a while,
detergents and
fabric softeners
leave deposits in
the drawer.

Clean the drawer,
from time to
time, by rinsing it
under a running
tap. To remove the drawer from the machine, press the button in the
rear left-hand corner.

To facilitate cleaning, the top part of the additive compartment can be
removed.

Detergent can also accumulate inside the
drawer recess: clean it with an old tooth­brush.

Refit the drawer after cleaning.

37

Water inlet filter

If you notice that the machine is taking longer to fill, check that the
filter in the water inlet hose is not blocked.

Turn off the water tap.
Unscrew the hose from the tap.
Clean the filter in the hose with a stiff brush.
Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the
machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled down;

• open the the pump door;

• place a bowl on the floor and place the end of the emergency
emptying hose into the bowl. Remove its cap. The water should drain
by gravity into the bowl. Whe the bowl is full, put the cap back on
the hose. Empty the bowl. Repeat the procedure until water stops
flowing out;

• clean the pump if necessary as previously described;

• replace the emergency emptying hose in its seat after having plug­ged it;

• screw the pump again and close the door.

Frost precautions

If the machine is installed in a place where the temperature could drop
below 0°C, proceed as follows:

• Close the water tap and unscrew the water inlet hose from the tap.

• Place the end of the emergency emptying hose and that of the inlet

hose in a bowl placed on the floor and let water drain out.

36

Cleaning and maintenance

• Screw the water inlet hose back on and reposition the emergency
emptying hose after having put the cap on again

.

By doing this, any water remaining in the machine is
removed, avoiding ice forming and consequently damage
to the appliance.

When you use the machine again, make sure that the
ambient temperature is above 0°C.

Something not working?

If during the spin cycle the machine makes an
unusual whistling noise, different from the
noise made by traditional washing machines,
this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technolo­gy of new washing machines that use less water than traditional
machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the
instructions below.

If you call out an engineer when one of the following problems arises,
or to repair a fault due to incorrect use, the call-out will be charged
even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

- E10: problem with the water supply (phase light is on)

- E20: problem with water draining (phase light is on)

- E40: door open (phase light is on)

Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all checks, the problem persists, con-
tact your local AEG Service Force Centre.

Problem

The machine does not work

Possible cause

The main electrical fuse Replace the fuse.
has blown.

The door is not properly Close the door; the click
closed (E40). of the lock should be heard.

The plug is not connected. Insert the plug.
The START button has not Press the button.

been pressed.
The DELAY START Check the selected delay on

option has been selected. the display.

Solution

3938

Something not working? Something not working?

Problem

The door will not open

Possible cause

The programme is still Wait until the end of the
running and the drum programme before opening
is turning. the door.

The water level is above the Before opening the door,
bottom edge of the door. the water must be emptied

out.

The machine is heating the Wait until the end of the
water or drying the heating or drying phase.
clothes.

Solution

The machine vibrates or is
noisy

The transit bolts have Check that the machine
not been removed. has been unpacked as

described in the Installation
section.

The feet have not been Carefully level the machine.
adjusted.

There is little laundry in Correct operation of the
the drum. machine is not affected.

Problem

The machine does not
empty and/or does not spin

Possible cause

The drain hose is Check the whole length of
squashed or kinked (E20). the hose and remove the

kink.

The drain pump or the Clean the pump or check
drain hose are clogged (E20). the hose.

The RINSE HOLD option Empty out the water by
(stop with water in drum) pressing the START button
has been selected. or selecting the DRAIN

programme.

The laundry is not evenly Redistribute the laundry
distributed inside the drum. manually in the drum.

There is water on the floor

Solution

The machine does not fill

The water tap is closed (E10). Open the water tap.

The water inlet hose is Check the whole length of the
squashed or kinked (E10). hose and remove the kink.

The small filter of the water Clean the filter.
inlet hose is clogged (E10).

The door is not properly Close the door.
closed (E40).

The machine fills then
empties immediately

The end of the drain hose Place the hose at the right
is too low. height (see Installation

section).

Too much detergent has Measure detergent
been used. according to the

manufacturer’s instructions.

An unsuitable detergent Use a suitable washing
has been used that machine detergent.
creates too much foam.

One of the connectors on Check that the hose is
the water inlet hose is firmly screwed on at both
leaking. ends.

The drain pump has not Fully screw the pump into
been properly screwed on place.
after cleaning.

The cap on the emergency Replace the cap on the
emptying hose has not been emergency emptying hose
replaced after cleaning the after cleaning the pump.
pump.

4140

Something not working? Something not working?

Spinning starts late or the
machine does not spin

The unbalance detection If the laundry is not evenly
device that prevents distributed inside the drum
excessive vibration during at the beginning of the
spinning has cut in. spin cycle, the machine

detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, at a lower speed,
if the laundry is not evenly
distributed.
If, after about 10 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme.

Problem Possible cause Solution

The machine will not dry or
the laundry is not dry
enough

The water tap is not open Open the water tap.
(E10).

The drain pump is clogged. Clean the pump.

The drying time or degree of Select the required function.
dryness has not been selected.

An appropriate drying time Select the appropriate
has not been chosen. drying time suitable for the

required degree of drying,
according to the type of
fabric (cottons or synthetics).

There is too much laundry Reduce the load.
inside the appliance.

Unsatisfactory washing results

If the laundry looks grey and lime scale is found in the drum

• Too little detergent has been used.

• An unsuitable detergent has been used.

• Stubborn stains have not been treated prior to washing.

• The programme/temperature has not been correctly selected.

If grey stains remain on the laundry

• Laundry stained with ointments, grease or oil has been washed with
an insufficient amount of detergent.

• The temperature selected for the wash programme was too low.

• Fabric softener - especially the concentrated type - has come into
direct contact with the laundry. Wash these stains immediately and
pour fabric softener carefully.

Foam is still visible even after the last rinse

• Modern detergents often produce foam, even in the last rinse. How­ever the laundry has been completely rinsed.

White residue is left on the laundry

• This is due to insoluble components in modern detergents and is
therefore not the result of insufficient rinsing. Shake or brush the
laundry. In future, it may be better to turn garments inside out before
washing them. Check the choice of detergent; try using liquid deter­gents.

43

Service

In the section “Something not working?” some problems that can be
solved by yourself are listed. Read this section in the event of problems.
If you are not able to find a solution, contact the Service centre.

In all cases, explain your problem carefully, in order to facilitate trou­bleshooting: the engineer will be able to decide whether a service call
is necessary.

Take note of the serial number (Ser.No.) and the product number (Prod.
No.) indicated on the rating plate.

Ser. No. . . . . . . . . . . . . . . . . . . . . . .

Prod. No. . . . . . . . . . . . . . . . . . . . . .

Furthermore, try to specify, as precisely as possible:

- The symptoms of the fault

- When the fault occurs

- The alarm code displayed

When can a service visit be charged during the guarantee period?

- when it should have been possible to solve the problem by yourself,

with the help of the troubleshooting chart (see section “Something
not working?”)

- when the engineer has to come out several times because he has

not been given all the relevant information he needs and so, for
example, has to fetch spare parts. Repeated trips can be avoided if
you prepare your call to the Service centre as described above.

42

Made in EEC

Mod. L 16810 Type P6359679
Prod.No. 914601620 00
220-230V~50Hz 2200W 10 A

Ser.No.

IPX4

Technical data

Height x Width x Depth 84x60x57 cm
Depth with door opened 100.5 cm
Height adjustment ± 10 mm approx.
Rated load (depending on programme) 6 kg
Use domestic
Drum speed during washing max. 55 rpm
Drum speed during spinning 1600/1200/900/700/400 rpm
Water pressure 50-800 kPa

This appliance complies with the following EC directives:

- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive
93 / 68 / EEC

- 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.

45

Dimensions of the appliance

Front view and side view

Rear view

44

90

595

10

Cold water

335

170

70

40

45

85

Power cable

Drain

565

605

1005

25

Instructions for installation and electrical connection

Safety instructions for the installer

• This appliance is heavy, care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in

doubt, do not use it and contact the retailer.

• All internal packing must be removed before using the appliance.

Serious damage may be caused to the machine or adjacent furniture
if the protective transit devices are not completely removed. Refer to
the relevant paragraph.

• Any electrical work required to install this appliance must be carried

out by a qualified electrician.

• Any plumbing work required to install this appliance must be carried

out by a qualified plumber.

• After having installed the machine, check that it is not standing on

its electrical supply cable.

• If the appliance is placed on a carpeted floor, ensure that air can cir-

culate freely between the adjustable feet and the floor.

• The installation should comply with local water authority and build-

ing regulations requirements.

• Should the appliance power supply cable need to be replaced, this

should be carried out by our Service Force Centre.

47

Installation

Positioning

Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by

carpets, rugs etc.

• Before placing it on small tiles, apply a rubber coating.

• Never try to correct any unevenness in the floor by putting pieces of
wood, cardboard or similar materials under the machine.

• If it is impossible to avoid positioning the machine next to a gas
cooker or coal-burning stove, an insulating panel (85x57 cm) covered
with aluminium foil on the side facing the cooker or stove, must be
inserted between the two appliances;

• The machine must not be installed in rooms where the temperature
can drop below 0.

• The water inlet hose and the drain hose must not be kinked.

• Please ensure that when the appliance is installed, it is easily accessi­ble for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the adjustable
feet in or out. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the floor.

Water inlet

Connect the water inlet hose to a separate
tap with a 3/4"
thread. Do not use
already employed
hoses for water
connecting.

The other end of
the inlet hose
which connects to
the machine can
be turned in any
direction. Simply loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too short and you do not
wish to move the tap, you will have to purchase a new, longer hose spe­cially designed for this type of use.

46

Installation

Unpacking

All transit bolts and packing must be removed before using the appli­ance.

Using a spanner,
unscrew and
remove the 2 rear
bottom screws.
Slide out the 2
plastic pins. Lay
the machine on
its back, taking
care not to squash
the hoses. This can be avoided by placing
one of the corner packing pieces between
the machine and the floor.

Remove the polystyrene block from the
bottom of the machine and release the two
plastic bags.

Carefully slide out the left-hand bag removing
it towards the right
and then down­wards.

Slide out the right­hand bag removing
it towards the left
and then upwards.

Set the machine
upright and
remove the
remaining rear
screw. Slide out
the relevant pin.

Plug the open
holes with the
plugs which you
will find in the
plastic bag containing the instruction booklet.

You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.

P0001

1

2

3

P1124

A

4948

Installation

Permanent connection

In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.

The switch must not break the yellow and green earth cable at any
point.

This operation must be performed by a qualified electrician.
Important: The power supply cable must be easily accessible after

installing the machine.

Installation

The inlet hose is provided with a water stop device, which protects
against damage caused by water leaks in the hose which could develop
due to natural ageing of the hose. This fault is shown by a red sector in
the window “A”. Should this occur, turn the water tap off and refer to
your Service Centre to replace the hose.

Water drainage

The end of the drain hose can be positioned
in three ways:

Hooked over the edge of a sink using the
plastic hose guide supplied with the
machine. In this case, make sure the end

cannot come unhooked when the machine is
emptying.

This could be done by tying it to the tap with
a piece of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be above the trap so that
the bend is at least 60 cm above the ground.

Directly into a
drain pipe at a
height of not less

than 60 cm and not
more than
90 cm.

The end of the drain hose must always be ventilated, i.e. the inside
diameter of the drain pipe must be larger than the outside diameter of
the drain hose.

The drain hose must not be kinked. Run it along the floor; only the part
near the drainage point must be raised.

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase,
50 Hz supply.

Check that your domestic electrical installation can take the maximum
load required (2.2 kW), also taking into account any other appliances in
use.

Connect the machine to an earthed socket.
The manufacturer does not accept any responsibility for damage or

injury through failure to comply with the above safety precaution.

AEG Hausgerate GmbH
Postfach 1036
D-90327 Nurnberg

http://www.aeg.hausgeraete.de

© Copyright by AEG

132.994.930-01-0103 Subject to change without notice

MADEINECCПраво на изменения сохряняется