User Manual
TPC-1071H/1271H/
1571H
Touch Panel Computer
®
With Intel
Processor
Atom™ Dual Core
Copyright
Part No. 2003157101 Edition 2
Printed in Taiwan January 2012
The documentation and the software included with this product are copyrighted 2011
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
This Manual Covers the Following Models:
TPC-1071H
TPC-1271H
TPC-1571H
TPC-1071H/1271H/1571H User Manual ii
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For outof-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
iii TPC-1071H/1271H/1571H User Manual
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech web site at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A complete description of the problem
– The exact wording of any error messages
3. This product is intended to be supplied by a listed power supply complying with
UL60950-1; rated from 10-29 V
, minimum 6.8 A to 2.4 A.
DC
TPC-1071H/1271H/1571H User Manual iv
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Caution! Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
v TPC-1071H/1271H/1571H User Manual
TPC-1071H/1271H/1571H User Manual vi
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Packing List............................................................................................... 2
1.2.1 TPC-1071H and 1271H ................................................................ 2
1.2.2 TPC-1571H ................................................................................... 2
1.3 Specifications ............................................................................................ 3
1.3.1 System Kernel............................................................................... 3
1.3.2 I/O Ports........................................................................................ 3
1.3.3 Safety and Environment................................................................ 3
1.4 LCD Specifications.................................................................................... 4
1.5 Touchscreen Specifications ...................................................................... 4
1.6 Power ........................................................................................................ 4
1.7 I/O Ports Arrangement .............................................................................. 5
Figure 1.1 TPC-1071H/1271H - I/O Port Arrangement
(Antenna is optional. Use P/N:1750000318 to order). 5
Figure 1.2 TPC-1571H - I/O Port Arrangement
(Antenna is optional. Use P/N:1750000318 to order). 5
1.8 Panel Mounting ......................................................................................... 6
Figure 1.3 Panel Mounting........................................................... 6
Figure 1.4 Front and Rear Images............................................... 6
1.9 Dimensions and Cutout............................................................................. 7
1.9.1 TPC-1071H ................................................................................... 7
Figure 1.5 TPC-1071H Dimensions............................................. 7
1.9.2 TPC-1271H ................................................................................... 8
Figure 1.6 TPC-1271H Dimensions............................................. 8
1.9.3 TPC-1571H ................................................................................... 9
Figure 1.7 TPC-1571H Dimensions............................................. 9
Chapter 2 System Setup.....................................11
2.1 System Setup.......................................................................................... 12
Figure 2.1 Unpack the Package ................................................ 12
Figure 2.2 Install CompactFlash Memory Card ......................... 13
Figure 2.3 Power Connector and Power Lines .......................... 13
Figure 2.4 Power Receptor & Switch Pin Assignment ............... 14
2.1.1 Installing the Drivers ................................................................... 14
Chapter 3 Features in Windows XP Embedded15
3.1 Features in Windows XP Embedded ...................................................... 16
3.2 EWF ........................................................................................................ 16
3.3 HORM ..................................................................................................... 16
Appendix A Jumper & Dip Switch Setting List and
DIO Pin Assignment and Wiring17
A.1 Jumper and DIP Switch Settings............................................................. 18
A.1.1 Jumper and Switch Locations ..................................................... 18
Figure A.1 Jumper and Switch Locations................................... 18
A.2 Jumper Settings ...................................................................................... 19
A.2.1 JP1 LCD Power Select ............................................................... 19
vii TPC-1071H/1271H/1571H User Manual
A.2.2 JP2 CMOS Clear Select ............................................................. 19
A.3 DIP Switch Settings ................................................................................ 20
A.3.1 SW1 TS Type Setting ................................................................. 20
A.3.2 SW2 LCD Controlled Function.................................................... 20
A.3.3 SW3 FPGA ................................................................................. 20
A.3.4 SW4 LCD Resolution Select....................................................... 21
A.3.5 SW5 & SW6 Termination Resistor Selection.............................. 21
A.4 DIO Board Pin Assignment and Wiring ................................................... 22
A.4.1 DIO PIN Assignment................................................................... 22
A.4.2 Isolated Digital Input -- Dry Contact............................................ 22
A.4.3 Isolated Digital Input -- Wet Contact ........................................... 23
A.4.4 Isolated Digital Output ................................................................ 23
TPC-1071H/1271H/1571H User Manual viii
Chapter 1
1 General Information
1.1 Introduction
The TPC-1071H/1271H/1571H Touch Panel Computers are state-of-the-art Human
Machine Interfaces featuring 10"/ 12"/ 15" displays with Intel Atom processors 400
and 500 Series with Intel 82801HM I/O Controller and the following key features:
Fanless
By using a low-power processor, the system does not have to rely on fans,
which often are unreliable and causes dust to circulate inside the equipment.
Compact Expansion
With its PCI-E/mini PCI-E slot, it provides the easiest way to expand TPC's functionality.
Multiple OS
In addition to the OS support of Windows XP, Advantech offers platform support
for WES7 and Windows XP embedded. The optional Windows CE operating
system, specifically for Industrial Touch Panel Computers is also available.
Automation IO Control Module
8 x DI/DO design with isolation and Fieldbus control for automation monitoring/
control application.
Various Mounting Options
TPC-1071H/1271H/1571H allows a variety of mounting systems e.g. panel
mount. It has been verified and is recommended to work with vertical mounting
systems.
RTC Battery Backup
RTC backup ensures real time data management in case of accidental power
failure.
1.2 Packing List
1.2.1 TPC-1071H and 1271H
8 x Panel Mount Clamps
8 x Panel Mount Screws
1 x 3 Pin Power Connector
1 x Power Indication Sticker
1 x Wire for Chassis Ground
1 x TPC Driver DVD
1 x Registration and Warranty Card
1 x Simplified Chinese Manual
2 x 10-pin plug-in block for DI/O port
1.2.2 TPC-1571H
10 x Panel Mount Clamps
10 x Panel Mount Screws
1 x 3 Pin Power Connector
1 x Power Indication Sticker
1 x Wire for Chassis Ground
1 x TPC Driver DVD
1 x Registration and Warranty Card
1 x Simplified Chinese Manual
2 x 10-pin plug-in block for DI/O port
TPC-1071H/1271H/1571H User Manual 2
1.3 Specifications
1.3.1 System Kernel
CPU: Intel® Atom™ D525 1.8GHz
BIOS: AMI BIOS
System Chipset: ICH8M
VGA: Integrated in ICH8M
Memory: 4GB SO-DIMM DDR3 SDRAM
LAN: 10/100/1000Base-T x 2
Watchdog Timer: 1 ~ 255 sec (system)
Expansion Slots: Full-size PCI-E or Mini PCI-E
Storage: CompactFlash
1.3.2 I/O Ports
TPC-1071H/1271H/1571H:
3 serial ports: RS-232 x 2 (w/ isolation), RS-422/485 x 1 (w/isolation)
1 PS/2 Keyboard/Mouse
2 USB 2.0 Ports: compliant with USB 2.0 and 1.1. (Host)
8 DI/DO & backup SRAM: DI/DO with isolation and backup 1MB SRAM
®
slot and SATA HDD x 1
Chapter 1 General Information
1.3.3 Safety and Environment
Safety
FCC Class A
CE certificated
The front bezel is compliant with NEMA 4 and IP65
Environment
Operating Temperature:
– 0 ~ 50°C (32 ~ 122°F)
Storage Temperature:
– -20 ~ 60°C (-4 ~ 140°F)
Humidity: 40°C @ 10~95% relative humidity (non-condensing)
Vibration: 2 grms (5 ~ 500 Hz) with CF Card, 1 grm with HDD kit
3 TPC-1071H/1271H/1571H User Manual
1.4 LCD Specifications
Display Type TFT LCD
Size (diagonal) 10.4"/ 12.1"/ 15"
Maximum Resolution 800x600 / 800x600 / 1024x768
Maximum Colors 262K
Viewing Angle 140°/110°, 160°/140°, 160°/140°
Luminance (cd / m2) 500 / 450 / 350
Contrast Ratio 500:1 / 700:1 / 700:1
Operating Temperature -30 ~ 85°C
Backlight LED
Note! There might be several bright or dark pixels on the LCD. This phenome-
non is normal in today’s LCD manufacturing.
TPC-1071H/1271H/1571H
1.5 Touchscreen Specifications
Touch Type: Resistive
Base Glass Construction: Tempered glass
Resolution: 1024 x 1024
Light Transmission: 80% ± 3% (Measured by BYK-Gardner)
Controller: RS-232 Interface
Lifespan: 1 million touches at single point
Note! Touchscreen ITO maybe crash duo to heavy usage.
1.6 Power
Input Voltage:
– Typical - 24V
– Swing Range - 10-29V
level exceeds 33V
Power Consumption: TPC-1071H: 17W /TPC-1271H: 20W / TPC-1571H:21W
(typical)
DC
(the fuse will become an open circuit if the input
DC
)
DC
TPC-1071H/1271H/1571H User Manual 4
1.7 I/O Ports Arrangement
The arrangement of the I/O ports is shown in in Figure 1.1 and 1.2.
Chapter 1 General Information
Figure 1.1 TPC-1071H/1271H - I/O Port Arrangement
(Antenna is optional. Use P/N:1750000318 to order)
Figure 1.2 TPC-1571H - I/O Port Arrangement
(Antenna is optional. Use P/N:1750000318 to order)
5 TPC-1071H/1271H/1571H User Manual
1.8 Panel Mounting
1. There is an adhesive waterproof gasket on the AL front bezel. Make sure the
waterproof gasket is in position before installing TPC into the panel opening.
1. Install the TPC into the panel opening.
2. Find the eight clamps and eight long screws in the accessory pack. Hook the
clamps to the holes around the four sides of the bezel. Insert the screws into
every clamp and fasten them. These screws will push the mounting panel and
fix the unit.
3. The suggested mounting panel thickness is less than 6 mm (0.236”).
Figure 1.3 Panel Mounting
Figure 1.4 Front and Rear Images
Note! The monitor should be vertically mounted on panels
TPC-1071H/1271H/1571H User Manual 6
1.9 Dimensions and Cutout
227
287
160.1
214
72.3
3
25 REF 278.50
218.50
1.9.1 TPC-1071H
Weight: 3kg
Dimensions (W x H x D):
– 287 x 227 x 72.3 mm (11.29" x 8.94" x 2.84")
Cutout:
– 279.5 x 219 mm
Chapter 1 General Information
Figure 1.5 TPC-1071H Dimensions
7 TPC-1071H/1271H/1571H User Manual
1.9.2 TPC-1271H
311
237
247
185.50
73.1
25 REF
3 20.6
301
227
Weight: 4.57kg
Dimensions (W x H x D):
– 311 x 237 x 73.1 mm (12.24" x 9.33" x 2.88")
Cutout: 302 x 228 mm
Figure 1.6 TPC-1271H Dimensions
TPC-1071H/1271H/1571H User Manual 8
1.9.3 TPC-1571H
1.27
383
307
306.1
230.1
78.50
4.5 24.5
297
373
Weight: 5.5kg
Dimensions (W x H x D):
– 383 x 307 x 78.5 mm (15.08" x 12.09" x 3.09")
Cutout: 374.5 x 298.5 mm
Chapter 1 General Information
Figure 1.7 TPC-1571H Dimensions
9 TPC-1071H/1271H/1571H User Manual
TPC-1071H/1271H/1571H User Manual 10
Chapter 2
2 System Setup
2.1 System Setup
You can easily get TPC started by following the below steps.
1. Unpack the TPC package. Check the packing list at the beginning of this manual
to make sure all items have been included.
Figure 2.1 Unpack the Package
2. Install a CompactFlash card containing Windows CE, Embedded Windows XP
or another operating system.
TPC-1071H/1271H/1571H User Manual 12
Figure 2.2 Install CompactFlash Memory Card
Warning! It is suggested to turn OFF system power as you plug in or pull out the
memory card, even though the CompactFlash memory is hot swappable.
Chapter 2 System Setup
3. Connect the power connector to the 24 V
either be of some power adapter or in-house power source.
power lines. The power lines can
DC
Figure 2.3 Power Connector and Power Lines
13 TPC-1071H/1271H/1571H User Manual
Figure 2.4 Power Receptor & Switch Pin Assignment
4. Plug the power lines into the system power receptor.
5. Power on the system.
6. Calibrate the touchscreen (click "PM" in the bottom corner).
Note! If you want to install the touchscreen driver & use the touchscreen utility,
please refer the user manual which is "PenMount 6000 InstallationGuide" on the DVD.
2.1.1 Installing the Drivers
After installing your system software, you will be able to set up the Ethernet, VGA,
and touchscreen functions. All drivers are stored in a DVD entitled “TPC-1071H,
TPC-1271H or TPC-1571H” which can be found in your accessory box.
The various drivers in the DVD have their own text files which help users install the
drivers and understand their functions. These files are a very useful supplement to
the information in this manual.
Note! The drivers and utilities used for the TPC-1071H, TPC-1271H and TPC-
1571H panel PCs are subject to change without notice. If in doubt,
check Advantech's website or contact our application engineers for the
latest information regarding drivers and utilities.
TPC-1071H/1271H/1571H User Manual 14
Chapter 3
3 Features in Windows
XP Embedded
3.1 Features in Windows XP Embedded
TPC product supports the embedded Windows platform. This section outlines the
important features (EWF and HORM), that are provided in Windows XP embedded.
3.2 EWF
EWF stands for Enhanced Write Filter. It provides an upper filter in the storage device
driver stack that redirects disk write operations to volatile (RAM) or non-volatile (disk)
storage. EWF protects a volume from write access. The benefits are as the following.
Write-protect one or more partitions on your system.
Enable read-only media, such as DVD or flash, to boot and run.
Prolong the lifespan of write-sensitive storage, such as CompactFlash.
TPC-1071H/1271H/1571H XPE provides EWF RAM-REG mode on system partition.
All wirte to system partition will be redirected to RAM once this mode is enabled. This
mode is manually enabled by customers after theyfinish all their changes on system
such as installing their applications or adjusting system setting.
Advantech provides a pair of utilities to operate EWF, OSLock andOSUnLock. Please
refer the training slide in the folder, file name is "Advantech XPe Add-one.pdf".
3.3 HORM
HORM stands for Hibernate Once Resume Many. In HORM environment, a single
hibernation file is used to boot the system repeatedly. To set a HORM environment,
please follow the steps below.
Please make sure EWF is disabled. You can run OSUnLock to disable EWF.
Enable hibernation support:
Run “power options” in control panel, and then select “Enable Hibernation” in hibernation pane.
Enable EWF:
Run OSLock, and then system reboot automatically.
Open those software that customers want to directly use after system resume from
hibernation.
Hibernate via Advantech HORM utility:
Please Click Start Menu->All Programs->Advantech->AdvWF
HORM environment remains all along unless the following events occur:
Run EWF commit command (ewfmgr c: -commit) and then reboot system.
Select “Discard hibernation file” by clicking F8 when system is starting up.
TPC-1071H/1271H/1571H User Manual 16
Appendix A
A Jumper & Dip Switch
Setting List and DIO
Pin Assignment and
Wiring
A.1 Jumper and DIP Switch Settings
If you need to adjust the jumper or DIP switch settings refer to the information below.
A.1.1 Jumper and Switch Locations
Figure A.1 Jumper and Switch Locations
TPC-1071H/1271H/1571H User Manual 18
A.2 Jumper Settings
A.2.1 JP1 LCD Power Select
JP1 is used to select LCD power
Description
1-3 & 2-4 +5V is used to supply LCD panel
3-5 & 4-6 +3.3V is used to supply LCD panel*
* Default setting
A.2.2 JP2 CMOS Clear Select
JP2 is used to select CMOS enable/disable
Description
2-3 Enable (Clear CMOS)
1-4 Disable*
Appendix A Jumper & Dip Switch Setting List and DIO Pin Assignment and
Wiring
* Default setting
19 TPC-1071H/1271H/1571H User Manual
A.3 DIP Switch Settings
A.3.1 SW1 TS Type Setting
SW1 is used to select TS type setting
Description On Off
Bit 1 T/S type 4,8 WIRE 5 Wire*
Bit 2 Baud Rate 9600 19,200*
* Default setting
TPC-1071H TPC-1271H TPC-1571H
Bit 1 Off Off Off
Bit 2 Off Off Off
A.3.2 SW2 LCD Controlled Function
SW2 is used to select LCD Controlled Function
Description On Off
Bit 1 Left and Right opposite
Bit 2 Up and Down opposite
Bit 3 Scan direction control
Bit 4 Select 6 or 8 bits LVDS input
Default settings
Bit 1 Off Off Off
Bit 2 Off Off Off
Bit 3 Off On On
Bit 4 Off On Off
A.3.3 SW3 FPGA
Default settings
Bit 1 Off Off Off
Bit 2 Off Off Off
Bit 3 Off Off Off
Bit 4 Off Off Off
Depends on LCD spec
TPC-1071H TPC-1271H TPC-1571H
TPC-1071H TPC-1271H TPC-1571H
TPC-1071H/1271H/1571H User Manual 20
A.3.4 SW4 LCD Resolution Select
SW4 is used to select LCD Resolution
Description On Off
Bit 1 GPI_LCDSEL0
Bit 2 GPI_LCDSEL1
Bit 3 GPI_LCDSEL2
Bit 4 GPI_LCDSEL3
Default settings
TPC-1071H TPC-1271H TPC-1571H
Bit 1 On Off On
Bit 2 On On Off
Bit 3 On On On
Bit 4 On On On
Depends on BIOS definitions
A.3.5 SW5 & SW6 Termination Resistor Selection
SW5 (optional COM) and SW6 (standard COM) are used to select the Termination
Resistor (120 ohm) for long distance transmission or device matching
Appendix A Jumper & Dip Switch Setting List and DIO Pin Assignment and
Wiring
Description On Off
Bit 1 Termination resistor select Enable Disable
Bit 2 Termination resistor select Enable Disable
Default Setting
TPC-1071H TPC-1271H TPC-1571H
Bit 1 Off Off Off
Bit 2 Off Off Off
21 TPC-1071H/1271H/1571H User Manual
A.4 DIO Board Pin Assignment and Wiring
A.4.1 DIO PIN Assignment
A.4.2 Isolated Digital Input -- Dry Contact
TPC-1071H/1271H/1571H User Manual 22
A.4.3 Isolated Digital Input -- Wet Contact
A.4.4 Isolated Digital Output
Appendix A Jumper & Dip Switch Setting List and DIO Pin Assignment and
Wiring
23 TPC-1071H/1271H/1571H User Manual
www.advantech.com
Please verify specifications before quoting. This guide is intended for reference
purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.
© Advantech Co., Ltd. 2011
Loading...