ADS Technologies TV STATION 100 PTV-360 Overview

TV Station 100
Turn your LCD or CRT monitor into a TV
Turn your LCD monitor into an LCD TV
Use as stand-alone TV Tuner without a PC
Connect to PC and switch from PC to TV viewing
Connect to a Projector using Component or VGA
connectors
Turn your LCD monitor into a TV
Convert any LCD or CRT monitor into a TV. Why buy expensive LCD TV’s, when you can create one yourself with a computer LCD monitor and TV Station 100? TV Station 100 lets you connect to LCD or CRT monitors with either VGA or Component (Red, Green and Blue) connections for the highest quality TV signal.
Play DVD’s and Video on your Monitor
TV Station 100 includes audio and video (RCA or S-Video) inputs allowing you to connect your DVD player, Set Top receiver or VCR to TV Station 100.
Remote Control
TV Station 100 includes an IR remote control allowing you to switch between PC or TV mode, change channels, select Source input, set sleep timer and other features from the comfort of your chair or sofa. An On Screen display confirms your channel and menu selections.
Easy to Use and Simple to Install
TV Station is simple to setup and use. Just connect your TV source and connect to the LCD or CRT monitor and you are ready to go! TV Station 100 features automatic channel scan with channel memory and sophisticated frequency scanning for automatic fine tuning on every channel. No Software installation required.
Product Features:
Supports resolutions up to 1280 x 1024 @ 75 Hz (SXGA)
Supports analog video input from all sources including Game Consoles, VCR’s,
Camcorders, DVD players – any device with an RCA (composite) or S-Video output
Supports all LCD/CRT/Plasma/Projectors with VGA or Component (YPbPr) connections
Stereo Sound
Supports multiple input sources: TV Tuner, S-Video, RCA (Composite) and VGA
VGA pass through – VGA monitor works with TV Station turned off
Channel Scanning, Channel memory (add/remove channels)
Fine tuning frequency scan – Locks fine tuning for stunning image quality
On Screen display for menu, channel display, volume control, sleep timer and mute
Sleep timer – selectable 30, 60, 90 and 120 minute settings
Brightness, Contrast, Saturation, Hue, Gamma and Sharpness settings
VGA/Component (YPbPr) output switching
Support for NTSC, PAL-BK, PAL-DK, PAL-I and Secam TV formats (specific
models)
Specifications
Input:
o Cable Ready TV Tuner (Coaxial for US, IEC for Europe) o VGA In (8 pin DIN) – custom cable connects to PC VGA card o RCA (Composite) o S-Video (Y/C) o 3.5mm stereo audio input o Right and Left Stereo audio RCA (Red and White RCA)
Output:
o VGA (15 pin D-sub) – Standard Monitor cable connection o 3.5mm stereo audio output o Component YPbPr
Power Supply – AC Wall Adapter
o INPUT: 100 – 240V ~ 50/60Hz 0.5A o OUTPUT: +12VDC - 1A
Weighted base unit:
o TV Station 100 does not tip over when all cables are connected
Includes:
TV Station 100 unit
6 ft. VGA to 8 pin Din cable
6 ft. 3.5mm to 3.5mm Stereo link cable
Custom A/V cable for Component Out and A/V inputs
Remote Control
Power Supply
User Guide
Base Stand
Batteries: 2 x AAA
Minimum System Requirements
:
Monitors: LCD, CRT, Plasma or projectors with VGA or Component Video input
Powered PC Speakers
Product Part: PTV-360 UPC Code: 7-57887-36013-9
Suggested Retail: $129.95
Shipping: March 2005
ADS TECH 12627 Hiddencreek Way Cerritos, CA 90703 800-888-5244 562-926-1928 562-926-0518 Fax
Loading...