InstantFMMusic
Personal FM and Web Radio Recorder
English/French/German/Spanish/Portuguese
Hardware/Software Installation
ADS Tech
NorthAmericaOffice
Cerritos, CA90703, USA
Fax:562.926.0518
EuropeanOffice
Unit 1B, Shannon Industrial Estate
Shannon Co. Clare, Ireland
Phone:+353.61.702042
Fax:+353.61.702001
SouthernEuropeandMEAOffice
51-55 rue Hoche
94200 Ivry sur Seine, France Phone:+33 1.43.90.19.20 Fax:+33 1.46.58.67.06
5.Remember to select your Instant FM Music as your Recording Device.
6.For more detailed information, open the User Guide available on the Installation CD by clicking the Help button.
7.To start your first recording click the Record tab and Add a New recording schedule or tune to a radio station and click the Red Button.
5.N’oubliez pas de sélectionner Instant FM Music comme périphérique d’enregistrement.
Quick Guide
RDX-155- 589
English
6.Pour en savoir plus, ouvrez le Guide de l’utilisateur inclus dans le CD d’installation en cliquant sur le bouton « Help ».
7.Pour lancer votre premier enregistrement, sélectionnez une station et cliquez sur le bouton rouge.
Français
Hardware Installation
1.Connect the 6 inch USB extension cable to the Instant FM Music device.
2.Plug the other end of the USB cable to an available USB port on your PC.
3.The system will automatically load drivers in preparation for use of this device.
4.Check your Device Manager for proper device installation.
a.Right-click “My Computer” and select “Properties.”
b.Go to the “Hardware” tab.
c.Click “Device Manager.”
d.This device adds the following components:
Human Interface Devices\HID-compliant device.
Human Interface Devices\USB Human Interface Device.
Sound, video and game controllers\USB Audio Device.
5.The device is ready to use.
6.Insert the CD and install the software provided.
Software Installation
1.In the Snaptune One Software installation, follow the instructions provided on each installation screen.
2.Make sure your Instant FM Music device is plugged in to a USB Port. See Step 4 of Hardware Installation.
3.After the installation completes, you can start the Snaptune One application.
4.The first time you run Snaptune One, a guide will help you get started. Follow the instructions on the screen.
English |
English |
Guide rapide d’installation du matériel
1.Branchez la rallonge USB 15 cm au périphérique Instant FM Music.
2.Branchez l’autre extrémité du câble à un port USB libre sur votre PC.
3.Le système chargera automatiquement les pilotes permettant d’utiliser ce périphérique.
4.Vérifiez la bonne installation du périphérique en consultant le « Gestionnaire de périphériques ».
a.Faites un clic droit sur « Poste de travail » et sélectionnez « Propriétés ».
b.Cliquez sur l’onglet « Matériel ».
c.Cliquez sur « Gestionnaire de périphériques ».
d.Ce périphérique ajoute les éléments suivants :
Périphériques d’interface utilisateur\Périphérique compatible HID. Périphériques d’interface utilisateur\Périphérique d’interface utilisateur USB. Contrôleur audio, vidéo et jeu\Périphérique audio USB.
5.Ce périphérique est prêt à l’utilisation.
6.Insérez le CD et installez le logiciel fourni.
Français
Service and Warranty
Service:
If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product the best option available to you is our website at www.adstech.com. Your primary source for information and assistance is always your computer store or computer parts dealer. If your ADS product needs repair or replacement, contact your dealer for on-site repair service.
The ADS Technologies technical support and customer service staff can aid in solving many problems. Our technical support department is available to repair any ADS Technologies product. You or your dealer must return products to our factory for repair or warranty replacement.
Return/Replacement:
If you need to return your ADS Technologies product you should return the product directly to the dealer or store where you purchased the product. Each individual computer store or dealer sets product returns policies for their customers. ADS Technologies, Inc. cannot be responsible for the actions or policies set by our dealers. If you desire to return the product for a refund, you must get the refund from the dealer or store you purchased the product from. If you purchased the product directly from ADS please see the “Terms and Conditions of Sale” on the reverse side of your sales invoice.
Returns to ADS Technologies, Inc. are for repair or warranty replacement only. If you need to return product to ADS Technologies, Inc. for repair or replacement you must follow these steps:
1.Call our Technical Support department at (562) 926-4338 in the USA or +353-61-702042 in Europe to obtain a Return Merchandise Authorization (RMA) number.
2.The RMA number is valid for 30 days.
3.Ship the product to the ADS factory with the RMA number marked on the inside and outside of the package. If there is no RMA number on the package or the RMA number has expired, the shipment will be refused. ADS will not be liable for lost or mis-shipped products.
4.Replacement product cannot be shipped to you until the defective product has been received by ADS.
5.Once the product is received at the factory it will be tested and then repaired or replaced.
6.Turn around time is approximately one week. A repaired or replacement product will be shipped back to you.
Warranty:
This ADS Technologies, Inc. product comes with a One (1) year hardware warranty. ADS Technologies, Inc. (ADS) warrants this product against defects in material and workmanship for a period of One (1) year from the date of original purchase from ADS or an authorized ADS dealer. This warranty applies only to the original purchase of the product and is not transferable. This warranty does not cover any incompatibilities due to the user’s computer, hardware, software or other related system configuration in which the product interfaces. Proof of purchase will be required before any warranty consideration by ADS occurs.
This warranty does not cover any damage caused by negligence, non-authorized modifications, or parts installed without prior written permission from ADS. This warranty does not apply if the product has been damaged by accident, abuse, or misapplication, nor as a result of service to the product by anyone other than ADS. If your ADS product is not in working order, your only recourse is repair or warranty replacement, as described above. UNDER NO CIRCUMSTANCES will ADS Technologies, Inc. be liable for consequential damages, including but not limited to any lost savings, lost profits, or any other damages, caused by the use of any ADS Technologies, Inc. product or inability to use the product, even if the dealer or ADS Technologies, Inc. has been advised of such liability or other claims. This includes damage to property and, to the extent permitted by law, damages for personal injury.
This warranty is in lieu of all other warranties including implied warranties of merchantability and fitness for a particular purpose.
Guide rapide d’installation du logiciel
1.Pour installer le logiciel Snaptune One, suivez les instructions affichées sur chaque écran d’installation.
2.Vérifiez que votre périphérique Instant FM Music est bien branché à un port USB.
3.Une fois l’installation terminée, vous pouvez lancer l’application Snaptune One.
4.La première fois que vous lancez Snaptune One, un assistant apparaît pour vous guider. Suivez les instructions affichées à l’écran.
Français
FCC Information
Federal communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
*Reorient or relocate the receiving antenna
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
*Consult the dealer or an experienced radio TV technician for help.
Notice:
(1)The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
(2)Shielded interface cables and AC power cord, if any, must be used in order comply with the emission limits.
© 2006 ADS Technologies. All Rights Reserved
First Edition: August, 2006
ADS is a registered trademark of ADS Technologies Inc.
ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. ADS Technologies assumes no responsibility or liability for any errors or inaccuracies that may appear herein. ADS Technologies makes no commitment to update or to keep current information contained within this document.
Loading...