ADS Technologies DLX-182 User Manual

O

System Requirements

Specifications and Features

Dual-link Hub

North America Support Hours

Phone; 562-92&4338
M-F: 8:00 am - 5:00 pm, PST
wwvKadstech.com
Support:

www.adstech.com/support/support.asp

ADS Tech

North America Office

Cerritos, CA, 90703
Fax: [phone]

European Office

Unit IB, Shannon Industrial Estate
Shannon Co. Clare, Irelarxi
Phone: ■>■353.61.702042
Fax: ■>■353.61.702001

Southern Europe and MEA Office

51-55 rue Hoche
94200 Ivrysur Seine, France
Phone: ■>■331.43.90.19.20
Fax:->-331.46.58.67.06

Installation Guide

Dual Link Hub DLX-182

Requirements:

• IBM Compatible PC or MAC* with available USB 1.1 or USB 2.0 port

•Available FlteWire port

• USB 2.0 Host controller requires USB drivers from Microsoft (WinXP) or third party drivers shipped
with USB Host controller card.

NOTE:

• For FULL USB 2.0 bandwidth speeds, you must connect to a USB 2.0 port/host.

Configuration :

• PC compatible IBM ou MAC* avec un port USB 1.1 ou un port USB 2.0 disponible

• Un port FireWire disponible

• Contrôleur hôte USB 2.0 requis Lecteurs USB de Microsoft (WinXP) ou lecteurs d'un tiers livrés avec la
carte contrôleur Hôte USB.

NOTE:

• Pour des vitesses de bandes passantes USB 2.0 MAXIMALES, connectez sur un portfhôte USB 2.0.

DLX-182

Features:

- 4 USB Porte to connect USB 1.1 or USB 2.0 devices

- 3 FireWire Porte

- Each Port has an LED that iighte up when a USB device is connected

DLX-182
Fonctionnalités :

- 4 ports USB pour connecter des périphériques USB 1.1

ou USB 2.0

- 3 ports FireWire

- Chaque port a une DEL qui s'allume lorsque que le périphérique USB est connecté

1. Power/Voyant

DLX-182

(+12 V, 830 mA, center positive)

□

Service

If you require assistance with the Installation, operation, or application of your ADS
Technologies, Inc. product there are several options available to you as described In the
technical support section of this manual. The ADS Technologies technical support and

customer service staff can aid in solving many problems. Our technical support department is

available to repair any ADS Technologies product. You or your dealer must return products to

our factory for repair or warranty replacement.

Retum/Repiacement:

Each individual computer store or dealer sets product returns policies for their customers. ADS
Technologies, Inc. cannot be responsible for the actions or policies set by our dealers.

If you desire to return the product for a refund, you must get the refund from the dealer or store
you purchased the product from. If you purchased the product directly from ADS please see the

“Terms and Conditions of Sale” on the reverse side of your sales invoice. Returns to ADS
Technologies, Inc. are for repair or warranty replacement only. If you need to return product to
ADS Technologies, Inc. for repair or replacement you must follow these steps:

1. Call our Technical Support department at [phone] to obtain a Return
Merchandise Authorization (RMA) number.

2. The RMA number is valid for 30 days.

3. Ship the product to the ADS factory with the RMA number marked on the inside
and outside of the package. If there is no RMA number on the package or the
RMA number has expired, the shipment will be refused. ADS will not be liable for
lost or misshipped products.

4. Replacement product cannot be shipped to you until the defective product has
been received by ADS.

2. Host Connection /

Connexion hôte

5. Once the product is received at the factory it will be tested and then repaired or
replaced.

6. Turn around time is approximately one week. A repaired or replacement product
will be shipped back to you.

Warranty:

This ADS Technologies, Inc. product comes with a One (1) year hardware warranty. ADS
Technologies, Inc. (ADS) warrants this product against defects in material and workmanship for a
period of One (1) year from the date of original purchase from ADS or an authorized ADS dealer. This
warranty applies only to the original purchase of the product and is not transferable. This warranty
does not cover any incompatibilities due to the user’s computer, hardware, software or other related
system configuration In which the product interfaces. Proof of purchase will be required before any
warranty consideration by ADS occurs. This warranty does not cover any damage caused by
negligence, non-authorized modifications, or parts Installed without prior written pemnission from ADS.
This warranty does not apply If the product has been damaged by accident, abuse, or misapplication,
nor as a result of service to the product by anyone other than ADS. If your ADS product is not in
working order, your only recourse is repair or warranty replacement, as described above. UNDER NO
CIRCUMSTANCES will ADS Technologies, Inc. be liable for consequential damages, including but
not limited to any lost savings, lost profits, or any other damages, caused by the use of any ADS
Technologies, Inc. product or inability to use the product, even if the dealer or ADS Technologies, Inc.
has been advised of such liability or other claims. This Includes damage to property and, to the extent
permitted by law, damages for personal injury. This warranty is in lieu of all other warranties including
implied warranties of merchantability and fitness for a particular purpose.

3. Device Connection /

Connexion périphériques

ro

•

_____

FCC Imformation

Federal communications Commission Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated In a residential
installation. This equipment generates, uses and can radiate radio frequency energy and If not
installed and used in accordance with the instruction manual may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause hamnful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user Is encouraged
to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the

receiver Is connected.

* Consult the dealer or an experienced radio TV technician for help.

Notice

(1) The changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

(2) Shielded interface cables and AC power cord, if any, must be used in order comply with the

emission limits.