ADC EWH-30, EWH-40, EWH-60, EWR-25, EWR-30 Installation Instructions

...

0 (0)

ECOWASH

INSTALLATION MANUAL

EWH-25 / EWH-30 / EWH-40 / EWH-60 EWR-25 / EWR-30 / EWR-40 / EWR-60

EWS-25 / EWS-30 / EWS40 / EWS-60 / EWS-80

M2 and MP2 Models

Part No. 113586-4

1. INTRODUCTION

Dear customer,

Thank you for the confidence you have placed in our product. We hope it meets your needs.

ADC products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

This washer is warranted against defects in manufacturing and workmanship per the warranty sheet included with the washer.

The warranty does not cover damage to glass components, or consumables (seals, bulbs, etc.) nor damage due to the incorrect installation of the appliance, or to inappropriate use, inadequate maintenance or poor repair processes.

This appliance is subject to changes and modifications for its technical progress.

RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the washer.

The following “FOR YOUR SAFETY” caution must be posted near the washer in a prominent location.

FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. The illustrations included in this manual may not depict your particular washer exactly.

IMPORTANT

For your convenience, log the following information:

DATE OF PURCHASE_____________________________________________ MODEL NO. _______________

RESELLER’S NAME _________________________________________________________________________

Serial Number(s) ____________________________________________________________________________

__________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the washer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

2 113586-4

2. CONTENTS

1. INTRODUCTION .................................................................................................................................................2

2. CONTENTS .........................................................................................................................................................3

3. MAIN SPECIFICATIONS .....................................................................................................................................4

4. MAIN DIMENSIONS ............................................................................................................................................6

5. IMPORTANT INSTRUCTIONS REGARDING SAFETY AND USE......................................................................8

6. STANDARDS .....................................................................................................................................................10

7. TRANSPORT.....................................................................................................................................................10

8. CHARACTERISTICS OF THE PLACE OF INSTALLATION .............................................................................. 10

9. HANDLING ........................................................................................................................................................10

10. INSTALLATION (ALL MODELS) ........................................................................................................................ 11

10.1 Water Connection ....................................................................................................................................... 11

10.2 Steam Connection....................................................................................................................................... 11

10.3 Drainage ...................................................................................................................................................... 11

10.4 Electrical Connection...................................................................................................................................12

10.5 Auxiliary Connections .................................................................................................................................. 14

10.6 Dispenser Inlet Connections ....................................................................................................................... 14

11. INSTALLATION OF GROUPS H-R-S ................................................................................................................15

11.1 Soft Washer Mounting Dimensions.............................................................................................................15

11.2 Rigid Washer Mounting Dimensions ...........................................................................................................16

11.3 Group (H) Washers .....................................................................................................................................17

11.4 Using a Steel Base ...................................................................................................................................... 18

11.5 Using an Elevated Concrete Pad ................................................................................................................18

11.5.1 Using Expansion Bolts ..........................................................................................................................19

11.5.2 Using J-bolts .........................................................................................................................................19

12. INSTALLATION OF SELF-SERVICE WASHING MACHINES (GROUP H-R-S) ...............................................20

12.1 Central Pay..................................................................................................................................................20

12.2 Card Reader ................................................................................................................................................ 20

12.3 Coin .............................................................................................................................................................20

13. WASHING MACHINE INSTALLATION AND MAINTENANCE ........................................................................... 21

113586- 4 3

Ambient conditions

3. MAIN SPECIFICATIONS

Ambient operating temperature

Storage temperature

Maximum relative humidity

Maximum altitude

GROUP H (High spin soft mount washing machines)

MODEL EWH-25 EWH-30 EWH-40 EWH-60

Drum Volume

Maximum Load

Washer Dry Weight

Motor Power

Drain Diameter

Water Input Diameter

Optional Steam Input Diameter

Optional Steam Consumption

Static Floor Load

Maximum Dynamic Floor Load

Maximum Vertical Load

Dynamic Load Frequency

CuFt

Kg Lb

Inc h

GHT &

BSPP

BSPP 1/2” 1/2” 1/2” 3/4”

Kg/h Lb/h

Hz 16.67 16.67 15.83 15.00

°C

°F

°C

°F

+5 / +41

+41 / + 106

+1 / +55

+34 / +131

%90

3.3 10

212 467

0.75 1

3/4” 3/4” 3/4” 3/4”

15.5

2.08

467

0.75

169

2.83

636

130

4.6 13

254 560

1.1

1.5 76

8.5

17.7

2.49 560

1.05 236

3.54 796

1000 3280

181

6.4 18

348 767

2.2

3.0 76

26.5

3.41 767

1.40 315

4.81

1082

247

8.7 25

5002 1107

3.0

4.0 76

33.1

4.92

1107

1.75 393

6.67

1465

Maximum G Force

Maximum Noise Level

db <70 <70 <70 <70

450 450 450 350

4 113586-4

GROUP R (Rapid spin rigid mount washing machines)

MODEL EWR-25 EWR-30 EWR-40 EWR-60

Drum Volume

Maximum Load

Washer Dry Weight

Motor Power

Drain Diameter

Water Input Diameter

Optional Steam Input Diameter

Optional Steam Consumption

Static Floor Load

Dynamic Floor Load

Maximum Vertical Load

Dynamic Load Frequency

CuFt

Kg Lb

Inc h

GHT &

BSPP

BSPP 1/2” 1/2” 1/2” 3/4”

Kg/h Lb/h

Hz 12.67 12.67 12.00 11.50

100

3.5 10

212 467

0.7 51

3/4” 3/4” 3/4” 3/4”

15.5

2.08 467

5.0

1124

7.08

1592

130

4.6 13

241 531

1.1

1.5 76

8.5

17.7

2.36 531

6.0

1349

8.36

1880

181

6.4 18

282 622

1.5

2.0 76

26.5

2.77 622

8.0

1798

10.77 2420

247

8.7

404 891

2.2

3.0

33.1

3.96 891

10.0

2248

13.96 3139

25 60

Maximum G Force

Maximum Noise Level

db <70 <70 <70 <70

GROUP S (Standard spin rigid mount washing machines)

MODEL EWS-25 EWS-30 EWS-40 EWS-60 EWS-80

Drum Volume

Maximum Load

Washer Dry Weight

Motor Power

Drain Diameter

Water Input Diameter

Optional Steam Input Diameter

Optional Steam Consumption

Static Floor Load

Dynamic Floor Load

Maximum Vertical Load

Dynamic Load Frequency

CuFt

Kg Lb

Inc h

GHT &

BSPP

BSPP 1/2” 1/2” 1/2” 3/4” 3/4”

Kg/h Lb/h

Hz 8.93 8.93 8.42 8.02 7.58

100

3.5 10

2044

0.75 1

3/4” 3/4” 3/4” 3/4” 3/4”

15.5

2.00

450

3.00

674

5.00

1124

200 200 200 200

130

4.6 13

235 518

1.1

1.5 76

8.5

17.7

2.31 518

4.00 899

6.31

1417

181

6.4 18

268 591

1.5

2.0 76

26.5

2.63 591

5.00

1124

7.63

1715

247

8.7 25

360 794

2.2

3.0 76

33.1

3.53 794

6.00

1349

9.53

2143

350

12.3 35

468

1032

3.0

4.0 76

39.7

4.59

1032

8.00

1798

12.59 2831

Maximum G Force

Maximum Noise Level

db <70 <70 <70 <70 <70

100 100 100 100 100

113586- 4 5

4. MAIN DIMENSIONS

A (Cold Water Inlet)

B (Hot Water Inlet)

C (Aux Water Inlet)

D (Drainage)

E (Tub Vent)

F (Steam Inlet-Optional)

G (Dispenser Inlets)

H (Ext. Dispenser Cable Inlets)

I (Main Power Cable Inlet)

GROUP H (High spin soft mount washing machines)

MODEL Unit EWH-25 EWH-30 EWH-40 EWH-60

M (Drum Diameter)

N (Drum Depth)

O (Entrance Diameter)

P (Drum Center Height)

Q (Under Door Height)

R (Drain Height)

X (Cabinet Width)

Y (Cabinet Height)

Z (Cabinet Depth)

CG Y (Center of Gravity)

CG Z (Center of Gravity)

mm Inch

29-58 psi (2-4 bar)

(7) 10 mm (3/8”) Hose, (1) 1/2” BSPP

532

425

16-3/4

290

11- 3/8

632

24-7/8

421

16-5/8

121

4-3/4

692

27-1/4

1162

45-3/4

791

31-1/8

424

16-3/4

577

22-3/4

620

24-3/8

430

16-7/8

373

14-5/8

689

27-1/8

432

126

788

1310

51-5/8

800

31-1/2

398

15-5/8

651

25-5/8

700

27-1/2

470

18-1/2

373

14-5/8

737

479

18-7/8

3-7/8

883

34-3/4

1410

55-1/2

845

33-1/4

464

18-1/4

702

27-5/8

770

30-3/8

530

20-7/8

373

14-5/8

853

33-5/8

595

23-3/8

130

5-1/8

979

38-1/2

1553

61-1/8

973

38-1/4

773

30-3/8

503

19-3/4

6 113586-4

GROUP R (Rapid spin rigid mount washing machines)

MODEL Unit EWR-25 EWR-30 EWR-40 EWR-60

M (Drum Diameter)

N (Drum Depth)

O (Entrance Diameter)

P (Drum Center Height)

Q (Under Door Height)

R (Drain Height)

X (Cabinet Width)

Y (Cabinet Height)

Z (Cabinet Depth)

CG Y (Center of Gravity)

CG Z (Center of Gravity)

Inc h

620

24-3/8

330

373

14-5/8

568

22-3/8

310

12-1/4

145

5-3/4

719

28-1/4

1157

45-5/8

645

25-3/8

383

15-1/8

511

20-1/8

620

24-3/8

430

16-7/8

373

14-5/8

568

22-3/8

310

12-1/4

144

5-5/8

719

28-1/4

1157

45-5/8

791

31-1/8

484

524

20-5/8

700

27-1/2

470

18-1/2

373

14-5/8

653

25-3/4

395

15-5/8

112

4-3/8

788

1307

51-1/2

800

31-1/2

479

18-7/8

546

21-1/2

770

30-3/8

530

20-7/8

373

14-5/8

691

27-1/4

433

150

5-7/8

884

34-3/4

1319

51-7/8

965

543

21-3/8

591

23-1/4

GROUP S (Standard spin rigid mount washing machines)

MODEL Unit EWS-25 EWS-30 EWS-40 EWS-60 EWS-80

M (Drum Diameter)

N (Drum Depth)

O (Entrance Diameter)

P (Drum Center Height)

Q (Under Door Height)

R (Drain Height)

X (Cabinet Width)

Y (Ca bi net Height)

Z (Cabinet Depth)

CG Y (Center of Gravity Height)

CG Z (Center of Gravity Depth)

mm Inc h

620

24-3/8

330

373

14-5/8

568

22-3/8

310

12-1/4

145

5-3/4

719

28-1/4

1157

45-5/8

645

25-3/8

383

15-1/8

511

20-1/8

620

24-3/8

430

16-7/8

373

14-5/8

568

22-3/8

310

12-1/4

144

5-5/8

719

28-1/4

1157

45-5/8

791

31-1/8

484

524

20-5/8

700

27-1/2

470

18-1/2

373

14-5/8

653

25-3/4

395

15-5/8

112

4-3/8

788

1307

51-1/2

800

31-1/2

479

18-7/8

546

21-1/2

770

30-3/8

530

20-7/8

373

14-5/8

677

26-5/8

419

16-1/2

148

5-7/8

884

34-3/4

1307

51-1/2

965

591

23-1/4

543

21-3/8

860

33-7/8

602

23-7/8

560

733

28-7/8

373

14-5/8

149

5-7/8

979

38-1/2

1411

55-1/2

1057

41-5/8

635

682

26-7/8

113586- 4 7

+ 15 hidden pages