ADC AD-25, AD-15 User Manual

0 (0)

AD-15/AD-25 Parts Manual

24 VAC Phase 5

1992 thru June 30, 2002

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

E-mail: techsupport@amdry.com

www.amdry.com

022292

 

052997WM/tf

ADC Part No. 450107

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

POUR VOTRE SÉCURITÉ

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Table of Contents

 

AD-15 Control Door Assembly Without Trim

 

For OPL (Non-Coin) Models Mfd. as of July 19, 1999 ....................................................................

3

AD-25 Control Door Assembly Without Trim

 

For OPL (Non-Coin) Models Mfd. as of November 11, 1998 ..........................................................

4

AD-15 High Security Control Door Assembly

 

For ALL Coin Models

 

For OPL Models Mfd. prior to July 19, 1999 ...................................................................................

5

AD-25 High Security Control Door Assembly

 

For ALL Coin Models

 

For OPL Models Mfd. prior to November 11, 1998 .........................................................................

6

Phase 5 Coin Microprocessor Control Panel Assembly ...........................................................................

7

Phase 5 OPL Microprocessor Control Panel Assembly ...........................................................................

8

Phase 5 Coin and OPL Microprocessor Control Box Assembly ...............................................................

9

AD-15/AD-25 Control Vault Assembly .................................................................................................

10

Dual Timer “Tap Touch” Controls

 

For Models Mfd. as of November 3, 2000 .....................................................................................

11

Dual Timer Control Panel Assembly

 

For Models Mfd. prior to November 3, 2000 .................................................................................

12

Non-Microprocessor Coin Meter Control Panel Assembly

 

For Models Mfd. as of January 25, 2002 ........................................................................................

13

Non-Microprocessor Coin Meter Control Panel Assembly

 

For Models Mfd. prior to January 25, 2002 ....................................................................................

14

Non-Microprocessor Control Box Assembly ........................................................................................

15

Slide Meter Case Assembly

 

For Models Mfd. as of March 13, 2001 .........................................................................................

16

Slide Meter Case Assembly

 

For Models Mfd. Between January 13, 1995 and March 13, 2001 .................................................

17

Slide Meter Case Assembly

 

For Models Mfd. prior to January 13, 1995 ....................................................................................

18

Main Door “Steel” Assembly ................................................................................................................

19

Plastic Main Door Assembly .................................................................................................................

20

Main Door Switch Assembly Cold Rolled Steel (CRS) Door .................................................................

21

Main Door Switch Assembly

 

For Models with Plastic Doors ........................................................................................................

22

AD-15/AD-25 Cold Rolled Steel (CRS) Door Front Panel ...................................................................

23

AD-15/AD-25 Front Panel Assembly

 

For Models with Plastic Doors ........................................................................................................

24

AD-15 Basket (Tumbler)/Support Assembly .........................................................................................

25

AD-25 Basket (Tumbler)/Support Assembly .........................................................................................

26

Drop Lint Door Assembly Without Trim

 

For AD-15 OPL Models Mfd. as of July 24, 1999

 

For AD-25 OPL Models Mfd. as of November 11, 1998 ...............................................................

27

Drop Lint Door Assembly With Trim

 

For ALL Coin Models

 

For AD-15 OPL Models Mfd. prior to July 24, 1999

 

For AD-25 OPL Models Mfd. prior to November 11, 1998 .....................................................

28, 29

AD-15/AD-25 Lint Trap Assembly .......................................................................................................

30

AD-15/AD-25 Basket (Tumbler) Bearing Assembly ..............................................................................

31

AD-15/AD-25 Idler Bearing Assembly ...........................................................................................

32, 33

AD-15 Motor Mount Assembly ......................................................................................................

34, 35

AD-25 Motor Mount Assembly ......................................................................................................

36, 37

Sensor Bracket Assemblies ............................................................................................................

38, 39

ADG-15 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. as of May 20, 2000 ......................................................................................

40, 41

ADG-25 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. as of May 20, 2000 ......................................................................................

42, 43

ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly

 

For Models Mfd. prior to May 20, 2000 ..................................................................................

44, 45

ADE-15/ADE-25 Electric Oven Assembly ......................................................................................

46, 47

ADG-15/ADG-25 DSI Johnson Control Module Assembly

 

For Models Mfd. as of May 20, 2000 ............................................................................................

48

ADG-15/ADG-25 Sail Switch/Hi-Limit Assemblies ...............................................................................

49

Single-Phase (1ø) Motor, Electric Relay Panel Assembly .......................................................................

50

3-Phase (3ø) Motor, Electric Relay Panel Assembly ..............................................................................

51

Slide Meter Control Box Assembly

 

For Models Mfd. as of January 13, 1995 ........................................................................................

52

Slide Meter Control Box Assembly

 

For Models Mfd. prior to January 13, 1995 ....................................................................................

53

ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly ............................................

54, 55

ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly ...............................................

56, 57

AD-15/AD-25 Outer Top/Back Guard Assembly .................................................................................

58

ADG-15/ADG-25 Heat Reclaimer Assembly ........................................................................................

59

Microprocessor Coin Acceptors Listing ................................................................................................

60

Coin Meter Replacement Parts .............................................................................................................

61

AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers ...........................................................

62

ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers ...........................................................

63

ADE-15/ADE-25 Electric Oven Component Application Charts ...........................................................

64

AD-15/AD-25 DSI Burner Assembly Specifications .............................................................................

65

Additional Parts Available ..................................................................................................................

66

AD-15 Control Door Assembly Without Trim

3

For OPL (Non-Coin) Models Mfd. as of July 19, 1999

 

Illus. No.

Part No.

Qty.

Description

1

881053

1

ADC Logo ONLY (with double adhesive tape)

 

870011

1

Logo Double Tape Kit

2

883097*

1

Control Door

 

 

 

(includes illus. nos. 2 and 3)

3

117604

4

Neoprene Sponge Tape (sold by the foot)

4

150300

4

#10-16 x 1/2” Hex Washer TEK Screw

5

102603

1

Control Door Rod Support Catch

6

102601

1

Control Door Retainer Clip

7

102502

1

Control Door Support Rod

8

882541

2

Spring Turn Latch Assembly

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

4

AD-25 Control Door Assembly Without Trim

 

For OPL (Non-Coin) Models Mfd. as of November 11, 1998

Illus. No.

Part No.

Qty.

Description

1

881053

1

ADC Logo ONLY (with double adhesive tape)

 

870011

1

Logo Double Tape Kit

2

882265*

1

Control Door

 

 

 

(includes illus. nos. 2 and 3)

3

117604

4

Neoprene Sponge Tape (sold by the foot)

4

150300

4

#10-16 x 1/2” Hex Washer TEK Screw

5

102603

1

Control Door Rod Support Catch

6

102601

1

Control Door Retainer Clip

7

102502

1

Control Door Support Rod

8

882541

2

Spring Turn Latch Assembly

*Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-15 High Security Control Door Assembly

5

For ALL Coin Models

For OPL Models Mfd. prior to July 19, 1999

Illus. No.

Part No.

Qty.

Description

1

160015

1

High Security MK-100 Lock Assembly with Key (for coin models Only)

 

160104

1

MK-100 Key ONLY

 

160011

1

Special Dummy Lock ONLY (for non-coin models Only)

2

160016

1

Lock Cam ONLY

3

881053

1

ADC Logo with Tape

 

870011

1

Double Sided Tape Kit

4

800023*

1

AD-15 High Security Control Door Assembly with Gray Trim

 

 

 

(includes illus. nos. 4 through 7)

 

883265*

1

AD-15 High Security Control Door Assembly with Black Trim

 

 

 

(includes illus. nos. 4 through 7)

 

800140

1

AD-15 High Security Stainless Steel Control Door Assembly with Gray

 

 

 

Trim Less Lock

 

 

 

(includes illus. nos. 4 through 7)

 

801197

1

AD-15 High Security Stainless Steel Control Door with Black Trim

 

 

 

(includes illus. nos. 4 through 7)

5

180200

1

AD-15 Top Gray Trim Strip with Lock Hole

 

180300

1

AD-15 Top Black Trim Strip with Lock Hole

6

117603

3

Suppressor Tape/Gasket (sold by the foot)

7

150201

5

#10-32 x 1/4” Phillips Round Head Machine Screw

8

150300

4

#10-16 x 1/2” Hex Washer TEK Screw

9

102603

1

Control Door Rod Support Catch

10

102601

1

Control Door Rod Retainer Clip

11

102502

1

Control Door Support Rod

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

6

AD-25 High Security Control Door Assembly

For ALL Coin Models

For OPL Models Mfd. prior to November 11, 1998

Illus. No.

Part No.

Qty.

Description

1

160015

1

High Security MK-100 Lock Assembly with Key (for coin models Only)

 

160104

1

MK-100 Key ONLY

 

160017

1

Special Dummy Lock ONLY (for non-coin models Only)

2

160016

1

Lock Cam ONLY

3

881053

1

ADC Logo with Tape

 

870011

1

Double Sided Tape Kit

4

800022*

1

AD-25 High Security Control Door Assembly with Gray Trim

 

 

 

(includes illus. nos. 4 through 7)

 

800141

1

AD-25 High Security Stainless Steel Control Door Assembly with Gray

 

 

 

Trim Less Lock

 

 

 

(includes illus. nos. 4 through 7)

 

883266*

1

AD-25 High Security Control Door Assembly with Black Trim

 

 

 

(includes illus. nos. 4 through 7)

 

882686

1

AD-25 High Security Stainless Steel Control Door Assembly with Black

 

 

 

Trim

 

 

 

(includes illus. nos. 4 through 7)

5

180201

1

AD-25 Top Gray Trim Strip with Lock Hole

 

180301

1

AD-25 Top Black Trim Strip with Lock Hole

6

117603

3

Suppressor Tape/Gasket (sold by the foot)

 

 

 

For Models Mfd. as of February 6, 1995

7

150201

5

#10-32 x 1/4” Phillips Round Head Machine Screw

8

150300

4

#10-16 x 1/2” Hex Washer TEK Screw

9

102600

1

Control Door Rod Support Catch

10

102601

1

Control Door Rod Retainer Clip

11

102502

1

Control Door Support Rod

*Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 5 Coin Microprocessor Control Panel Assembly

7

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keyboard Label Assembly

2

883537

1

Phase 5 Coin Control Panel Assembly

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883538

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883582

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. prior to June 25, 2002)

 

883581

1

Phase 5 Coin Control Panel Assembly

 

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

 

(for models mfd. prior to June 25, 2002)

 

883539

1

Coin Control Panel ONLY

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883540

1

Coin Control Panel ONLY with Battery Bracket

 

 

 

 

(for models mfd. as of June 25, 2002)

 

883580

1

Coin Control Panel ONLY

 

 

 

 

(for models mfd. prior to June 25, 2002)

 

883579

1

Coin Control Panel ONLY with Battery Bracket

 

 

 

 

(for models mfd. prior to June 25, 2002)

3

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

4

137213

1

Phase 5 Coin Controller ONLY

 

824998

1

Phase 5 Battery Clip

5

153010

2

#6 Star Washer

6

150005

2

#6-32 x 1/4” Phillips Round Head Machine Screw

7

--------

1

Microprocessor Coin Acceptor

 

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 60)

8

--------

1

Optic Switch ONLY

 

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 60)

9

137023

1

Optic Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

 

880772

1

Single Coin Optical Switch Harness

 

122800

1

Microprocessor (female) Pin Extraction Tool

11

136048

1

1/8-Amp (Slo-Blo) Fuse ONLY

IMPORTANT:

Check label on computer chip to verify correct part number for controller.

Telephone: (508) 678-9000

Fax: (508) 678-9447

8

Phase 5 OPL Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

1

112535

1

OPL English Keyboard Label Assembly

 

112276

1

OPL Stick-On Labels (English Only)...Not Illustrated

 

112275

1

3-Language OPL Stick-On Labels...Not Illustrated

 

 

 

(Spanish, Italian, and Hebrew)

 

112277

1

3-Language OPL Stick-On Labels...Not Illustrated

 

 

 

(English, Spanish, and Hebrew)

 

112278

1

5-Language OPL Stick-On Labels...Not Illustrated

 

 

 

(Italian, Dutch, French, German, and Chinese)

2

801255

1

Phase 5 Microprocessor Control Panel ONLY

 

801256

1

Phase 5 Microprocessor Control Panel ONLY with Battery Bracket

 

801206

1

Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 6)

 

801207

1

Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

3

137222

1

Phase 5 OPL Non-Reversing Controller ONLY

 

137231

1

Phase 5 OPL Reversing Controller ONLY

 

824998

1

Phase 5 Battery Clip

4

153010

2

#6 Star Washer

5

150005

2

#6-32 x 1/4” Phillips Round Head Machine Screw

6

150300

1

#10-16 x 1/2” Hex Washer TEK Screw

 

 

 

(for models mfd. as of March 1, 1994)

 

882541

1

Spring Turn Latch (2-piece)...Not Illustrated

 

 

 

(for models mfd. prior to March 1, 1994)

7

136048

1

1/8-Amp (Slo-Blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number for controller.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 5 Coin and OPL Microprocessor Control Box Assembly

9

Illus. No.

Part No.

Qty.

Description

1

--------

1

24 VAC Control Voltage Transformer

 

 

 

(refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam

 

 

 

Dryers on page 62)

 

 

 

(refer to AD-15/AD-25 Transformer Usage Listing for Electric

 

 

 

Dryers on page 63)

2

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

3

120715

1

30-Position Terminal Block

4

150002

2

#6-32 x 1” Phillips Round Head Screw

5

151000

2

#6-32 Pal Nut

6

136057

*

1/2-Amp (Slo-Blo) Fuse

7

150301

*

#8-18 x 7/16” Self Drilling Screw

8

136008

*

Fuse Block/Strip ONLY

9

122641

1

15-Pin Microprocessor Connector

10

122706

*

Sockets ONLY

11

131931

1

Steam Valve Relay - 24 VAC

 

 

 

(for mechanical steam damper models Only)

12

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

13

137035

1

Motor Capacitor

 

 

 

(for mechanical steam damper models Only)

14

323583

1

Capacitor Bracket

 

 

 

(for mechanical steam damper models Only)

15

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

16

132002

1

Transformer

 

 

 

(for mechanical steam damper models 208 volts and higher)

17

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

*As required.

Telephone: (508) 678-9000

Fax: (508) 678-9447

10

AD-15/AD-25 Control Vault Assembly

Illus. No.

Part No.

Qty.

Description

1

802112

1

Microprocessor Coin Vault Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

 

802117

1

Microprocessor Coin Vault ONLY

 

802110

1

Non-Microprocessor Coin Vault Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

 

802115

1

Non-Microprocessor Coin Vault ONLY

2

160028

1

Cam for 1/4 Turn Lock ONLY

3

875061

1

1/4 Turn Lock with Key and Cam

 

160105*

1

1/4 Turn Mer-Pel Key ONLY

4

802020

1

1/4 Turn Coin Box Assembly

 

 

 

(includes illus. nos. 2 through 5)

 

802019

1

1/4 Turn Coin Box ONLY without Faceplate

 

125915

1

High Security (Greenwald) Coin Box ONLY with Key

5

802018

1

1/4 Turn Coin Box Faceplate ONLY

6

152014

4

1/4-20 Free Spin Wash Nut

7

102502

1

Control Door Support Rod

8

102601

1

Control Door Rod Retainer Clip

9

102603

1

Control Door Rod Catch

*Specify key number when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Dual Timer “Tap Touch” Controls

11

For Models Mfd. as of November 3, 2000

 

Illus. No.

Part No.

Qty.

Description

1

124030

1

15 Minute Timer - 24 VAC

2

124025

1

60 Minute Timer - 24 VAC

3

824175

1

Red Pilot Light - 24 VAC

4

122301

1

“Tap Touch” Switch

5

131932

3

Relay SPST 24v

6

120730

1

30-Position Terminal Block

7

151000

6

#6-32 Pal Nut

8

882903

1

Dual Timer Panel Complete

 

 

 

(includes illus. nos. 1 through 15)

 

850392

-

Dual Timer Panel ONLY

9

153010

2

#6 Star Washer

10

152000

3

#6-32 Hex Nut

11

150207

2

#10-24 x 1/2” Phillips Pan Head Machine Screw

12

150110

4

#8-32 x 1/4” Phillips Round Head Machine Screw

13

112563

1

Dual Timer Panel Overlay

14

124104

1

Pure Touch Knob with Red Pointer

15

124105

1

Pure Touch Knob with Blue Pointer

Telephone: (508) 678-9000

Fax: (508) 678-9447

12

Dual Timer Control Panel Assembly

 

For Models Mfd. prior to November 3, 2000

Illus. No.

Part No.

Qty.

Description

1

123005

1

Red Indicator Light - 24 VAC

2

122400

1

Rocker Heat Selector Switch

3

824015

1

Dual Timer Control Panel Assembly Complete - 24 VAC

 

 

 

(includes illus. nos. 1 through 21)

 

800051

1

Dual Timer Control Panel ONLY

4

131917

1

Push-To-Start Relay - 24 VAC

5

150207

2

#10-24 x 1/2” Round Head Machine Screw

6

154001

2

#10-24 Speed Nut

7

152000

2

#6-32 Hex Nut

8

153010

2

#6 Star Washer

9

120713

1

18-Position Terminal Block

10

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

11

150110

4

#8-32 x 1/4” Phillips Machine Screw

12

150001

2

#6-32 x 1/2” Phillips Round Head Machine Screw

13

131931

1

Dual Timer Relay - 24 VAC

14

151000

2

#6-32 Pal Nut

15

112050

1

Dual Timer Label ONLY

16

150415

1

#10-16 x 1/2” Phillips Round Head Crimptite Screw

 

 

 

(for models mfd. as of March 1, 1994)

 

882541

1

Spring Turn Latch (2-piece)...Not Illustrated

 

 

 

(for models mfd. prior to March 1, 1994)

17

124103

2

Arrow Timer Knob

18

124025

1

60 Minute Timer - 24 VAC

19

124030

1

15 Minute Timer - 24 VAC

20

122602

1

9-Pin Connector ONLY

21

122700

8

Pin Terminal ONLY

--

122801

1

Pin/Socket Extraction Tool

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Non-Microprocessor Coin Meter Control Panel Assembly

13

For Models Mfd. as of January 25, 2002

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

123005

1

Red Indicator Light - 24 VAC

2

122400

1

Rocker Heat Selector Switch

3

824172

1

Coin Meter Control Panel Assembly Less Coin Meter

 

 

 

(includes illus. nos. 2 through 5, 7, and 8)

 

824109

1

Coin Meter Control Panel ONLY

4

131932

1

24 VAC Relay

 

154001

2

#10-24 Speed Nut (used on P/N 131932, 24 VAC Relay)

5

123225

1

Green Push-To-Start Button

6

125601

1

25¢ Coin Meter - 24 VAC (specify timing)

7

153010

2

#6 Star Washer

8

152016

2

Hex Nut

9

120712

1

12-Position Terminal Block

10

150300

1

#10-16 x 1/2” Hex Washer TEK Screw

11

122602

1

9-Pin Connector

12

122700

7

Pin Terminal ONLY

---

122801

1

Pin Extraction Tool

NOTE: For Coin Meter Replacement Parts refer to page 61.

Telephone: (508) 678-9000

Fax: (508) 678-9447

14

Non-Microprocessor Coin Meter Control Panel Assembly

 

For Models Mfd. prior to January 25, 2002

Illus. No.

Part No.

Qty.

Description

1

123005

1

Red Indicator Light - 24 VAC

2

122400

1

Rocker Heat Selector Switch

3

824020

1

Coin Meter Control Panel Assembly Complete - 24 VAC

 

 

 

(includes illus. nos. 1 through 6 and 8 through 12)

 

800054

1

Coin Meter Control Panel ONLY

4

131917

1

Push-To-Start Relay - 24 VAC

5

150207

2

#10-24 x 1/2” Round Head Machine Screw

6

154001

2

#10-24 Speed Nut

7*

125601

1

25¢ Coin Meter - 24 VAC (specify timing)

8

150303

2

#4 x 3/4” Pan Head “A” Screw

9

120712

1

12-Position Terminal Block

10

150309

1

#10-16 x 1/2” Hex Head TEK Crimptite Screw

 

 

 

(for models mfd. as of March 3, 1994)

 

882541

1

Spring Turn Latch (2-piece)...Not Illustrated

 

 

 

(for models mfd. as of March 3, 1994)

11

122602

1

9-Pin Connector ONLY

12

122700

9

Pin Terminal ONLY

---

122801

1

Pin/Socket Extraction Tool

*Consult factory for coin meters not listed.

NOTE: For Coin Meter Replacement Parts refer to page 61.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Non-Microprocessor Control Box Assembly

15

Illus. No.

Part No.

Qty.

Description

1

122603

1

9-Pin Socket Connector

2

122701

9

Socket Terminal ONLY

 

122801

1

Pin/Socket Extraction Tool

3

315010

1

9-Pin Connector Bracket

4

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

5

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

6

---------

1

24 VAC Control Voltage Transformer

 

 

 

(refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam

 

 

 

Dryers on page 62)

 

 

 

(refer to ADE-15/ADE-25 Transformer Usage Listing for Electric

 

 

 

Dryers on page 63)

7

150309

2

#10-16 x 1/2” Hex Head TEK Crimptite Screw

8

131931

1

Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC

9

136008

*

Fuse Block/Strip ONLY

10**

136057

*

1/2-Amp (Slo-Blo) Fuse ONLY

11

150301

*

#8-18 x 7/16” Phillips Pan Head TEK Screw

12

150002

2

#6-32 x 1” Phillips Round Head Machine Screw

13

120715

1

30-Position Terminal Block

14

151000

2

#6-32 Pal Nut

15

132002

1

Transformer (for mechanical steam damper 208 VAC and higher)

16

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

17

137035

1

Motor Capacitor (for mechanical steam damper models Only)

18

323583

1

Capacitor Bracket (for mechanical steam damper models Only)

19

150300

2

#10-16 x 1/2” Hex Washer TEK Screw

*As required.

**Check fuse on dryer for verification.

Telephone: (508) 678-9000

Fax: (508) 678-9447

16

Slide Meter Case Assembly

 

For Models Mfd. as of March 13, 2001

Illus. No.

Part No.

Qty.

Description

1*

160199

1

Key ONLY for Slide Meter Lock

2

160099

1

Lock/Key/Cam and Hardware

3

125908

1

Slide Meter Accumulator - 24 VAC

4

122643

9

Mate-N-Lock Pin ONLY

5

122642

1

9-Position Mini-Universal Socket

6

152014

4

1/4-20 Free Spin Wash Nut

7

122631

2

6-Position Connector (mate-n-lock)

8

131917

1

Push-To Start Relay - 24 VAC

9

883034

1

White Slide Meter Case

 

883035

1

Coral Blue Slide Meter Case

 

883036

1

Ivory Slide Meter Case

10

122603

1

9-Position Connector (mate-n-lock)

11

122701

21

Socket Terminal ONLY

12

883165

1

Slide Meter Case ONLY with Door Less Lock

13

154203

6

1/4” Drive Rivet

14

801700

1

Slide Meter Extension ONLY with Mirror

 

 

 

(includes illus. nos. 14 and 15)

15

315404

1

Stainless Steel Mirror ONLY

16

--------

1

Typical Slide Meter Coin Chute (not available from ADC)

17

123005

1

Red Indicator Light - 24 VAC

18

122400

1

Rocker Heat Selector Switch

19

--------

1

Typical Slide Meter Coin Box (not available from ADC)

20

801701

1

Slide Meter Case Mounting Plate

21

102502

1

Control Door Support Rod

22

102601

1

Control Door Rod Retainer Clip

23

102603

1

Control Door Support Rod Catch

24

883044

1

Slide Meter Extension

25

883038

1

White Slide Meter Timer Door

 

883039

1

Coral Blue Slide Meter Timer Door

 

883040

1

Ivory Slide Meter Timer Door

*Specify key number when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Slide Meter Case Assembly

17

For Models Mfd. Between January 13, 1995 and March 13, 2001

 

Illus. No.

Part No.

Qty.

Description

1*

160199

1

Key ONLY for Slide Meter Lock

2

160099

1

Lock/Key/Cam and Hardware

3

125908

1

Slide Meter Accumulator - 24 VAC

4

122643

9

Mate-N-Lock Pin ONLY

5

122642

1

9-Position Mini-Universal Socket

6

152014

4

1/4-20 Free Spin Wash Nut

7

122631

2

6-Position Connector (mate-n-lock)

8

131917

1

Push-To Start Relay - 24 VAC

9

881100

1

Slide Meter Modular J-Box Assembly

10

122603

1

9-Position Connector (mate-n-lock)

11

122701

21

Socket Terminal ONLY

12

883165

1

Slide Meter Case ONLY with Door Less Lock

13

154203

6

1/4” Drive Rivet

14

801700

1

Slide Meter Extension ONLY with Mirror

 

 

 

(includes illus. nos. 14 and 15)

15

315404

1

Stainless Steel Mirror ONLY

16

--------

1

Typical Slide Meter Coin Chute (not available from ADC)

17

123005

1

Red Indicator Light - 24 VAC

18

122400

1

Rocker Heat Selector Switch

19

--------

1

Typical Slide Meter Coin Box (not available from ADC)

20

801701

1

Slide Meter Case Mounting Plate

21

102502

1

Control Door Support Rod

22

102601

1

Control Door Rod Retainer Clip

23

102603

1

Control Door Support Rod Catch

24

883044

1

Slide Meter Extension

*Specify key number when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

ADC AD-25, AD-15 User Manual

18

Slide Meter Case Assembly

 

For Models Mfd. prior to January 13, 1995

Illus. No.

Part No.

Qty.

Description

1*

160199

1

Key ONLY for Slide Meter Lock

2

160099

1

Lock/Key/Cam and Hardware

3

125908

1

Slide Meter Accumulator - 24 VAC

4

152014

4

1/4-20 Free Spin Wash Nut

5

883165

1

Slide Meter Case ONLY with Door Less Lock

6

154203

6

1/4” Drive Rivet

7

801700

1

Slide Meter Extension ONLY with Mirror

 

 

 

(includes illus. nos. 14 and 15)

8

315404

1

Stainless Steel Mirror ONLY

9

--------

1

Typical Slide Meter Coin Chute (not available from ADC)

10

--------

1

Typical Slide Meter Coin Box (not available from ADC)

11

801701

1

Slide Meter Case Mounting Plate

12

102502

1

Control Door Support Rod

13

102601

1

Control Door Rod Retainer Clip

14

102600

1

Control Door Support Rod Catch

15

122400

1

Rocker Heat Selector Switch

16

123005

1

Red Indicator Light - 24 VAC

17

131917

1

Push-To-Start Relay - 24 VAC

*Specify key number when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Main Door “Steel” Assembly

19

Illus. No.

Part No.

Qty.

Description

1

881150

1

Black Main Door Assembly Complete

 

 

 

(includes illus. nos. 1, 2, and 8 through 15)

2

102354

1

Door Gasket

 

170731

1

Black Glass Adhesive (10.3 oz. cartridge)

3

881152

1

Black Top Hinge Block Assembly

 

 

 

(includes illus. nos. 3 and 4)

4

150445

2

1/4-20 x 3/4” Black Cap Head Setscrew

5

153031

1

1/4” Nylon Washer

6

881151

1

Black Bottom Hinge Block Assembly

 

 

 

(includes illus. nos. 5 through 7)

7

150445

2

1/4-20 x 3/4” Black Cap Head Setscrew

 

150443

2

1/4-20 x 3/4” Stainless Steel Cap Head Setscrew

8

150683

3

1/4-20 x 5/8” Black Carriage Bolt

9

152014

3

1/4-20 Free Spin Wash Nut

10

151010

1

#10-32 Black Hex Acorn Nut

11

150120

1

Door Latch Screw

12

150683

3

1/4-20 x 5/8” Black Carriage Bolt

13

152014

3

1/4-20 Free Spin Wash Nut

14

881210

1

Black Main Door Handle ONLY

15

102211

1

Door Glass without Holes

 

102218

1

20-7/16” Door Glass with 4 Holes for Mechanical Fasteners

 

170731

1

Black Glass Adhesive (10.3 oz. cartridge)

16

151013

4

#10-32 Black Nylon Acorn Nut

Telephone: (508) 678-9000

Fax: (508) 678-9447

Loading...
+ 48 hidden pages