Adam Equipment OCS-2 User Manual

E-mail:

Adam Equipment S.A. (Pty) Ltd

7 Megawatt Road, Spartan EXT 22, Kempton Park,

Johannesburg, Republic of South Africa

Phone: [phone] Fax: [phone]

[e-mail] Website: www.adamequipment.com

.

OCS-2 User Manual

Description

Compact, portable digital hanging weighing scales offering
reliable performance and weighing.accuracy.

Specifications

Model Max. Capacity Readability

OCS-2 10kg 10g
OCS-2 30kg 10g

Common specifications

Operating

0°C – 40°C
Temperature
Power 2 x CR2032 battery
Net weight 230g

Features

• Aluminium Housing

• 5 digits LCD display

• Power-saving auto shut-off

• Displays in kg / lb

• Integral 1m tape measure

• Low battery indication

• Tare function

• Hold function

• Supplied with weighing hook and hanging bracket

@Adam Equipment Company 2005 P.N. 8021, December 2005

OCS-2_user_revA1

User Operations

• Put the scale at a vertical position without any weight on the weighing hook.

• Press the [On/Off] key, the display with show a test message and after 5

seconds will return to zero. Now the scale is ready for weighing.

• When pressing the [On/Off] switch, the scale will power off. The scale will
turn off after 60 seconds automatically after the last weighing to prolong
battery life.

• [Hold] key: Press the [Hold] key to record the measured weight, pressing
the [Hold] key again returns to normal weighing.

• [Set] key: Press the [Set] key to change between lbs and kg.

• [Tare] key: This function has been specially designed for weighing

substances that require to be put into a container. First place empty
container on the hook and press the [Tare] key, the display will return to
zero. Now you can put the substances into the empty container and the
display will show the net weight.

Batteries

When the display shows “

LO BAt

” replace the batteries.

Calibration

1. Press and hold down the [Tare] and [On/Off] key, when “

8888

” is displayed
release [On/Off] key and then release the [Tare] key. The A/D count will be
shown (about 1000-8000 value)

2. Press the [Tare] key, this will show “

CAL

” and then the first calibration weight

value.

3. Hang the calibration weight on the weighing hook and press the [Tare] key.

4. The second calibration weight value will be shown, hang this weight on the
weighing hook and press the [Tare] key.

5. The third calibration weight value will be shown, hang this weight on the
weighing hook.

6. The display will then show “

PASS

” and the current weight.

7. At any time to exit from Calibration press [On/Off] key.

* * *

@Adam Equipment Company 2005 P.N. 8021, December 2005

OCS-2_user_revA1