Adam Equipment NBL 6201e, NBL 8201e, NBL 16001e, NBL 12001e, NBL 22001e Operating Manual

...

Adam Equipment

Nimbus NBL Series

Operating Manual

For internal (‘i’) and external (‘e’) calibration models

(P.N. 3016612481, Revision 2.00, Effective Jul 2015)

Software rev.: V3.1145 & above (Force Motor Analytical Models)

V4.1826 & above (Precision Load Cell Models)

TABLE OF CONTENTS

1 KNOW YOUR BALANCE ........................................................................................................ 2

2 PRODUCT OVERVIEW .......................................................................................................... 3

3 PRODUCT SPECIFICATIONS ................................................................................................ 4

4 UNPACKING THE BALANCE ............................................................................................... 10

5 LOCATING THE BALANCE .................................................................................................. 10

6 SETTING UP THE BALANCE ............................................................................................... 11

6.1 ASSEMBLING THE BALANCE ...................................................................................... 11

6.1.1 Levelling the balance ............................................................................................... 11

6.1.2 Warm-Up Time ........................................................................................................ 11

6.1.3 Weighing.................................................................................................................. 11

6.2 CALIBRATION .............................................................................................................. 12

6.2.1 Manual Calibration ................................................................................................... 12

6.2.2 Calibration using Internal Calibration mass (if fitted) ................................................ 12

6.2.3 Calibration using External Calibration mass ............................................................. 12

6.2.4 Automatic Calibration ............................................................................................... 12

6.2.5 Calibration Errors ..................................................................................................... 13

7 DISPLAY ............................................................................................................................... 14

7.1 SYMBOLS AND TEXT................................................................................................... 14

8 KEYPAD ............................................................................................................................... 15

8.1 NUMERIC ENTRY METHOD ........................................................................................ 16

9 INPUT/OUTPUT .................................................................................................................... 17

10 OPERATIONS .................................................................................................................... 18

10.1 INITIALISATION ............................................................................................................ 18

10.2 PASSCODES ................................................................................................................ 18

10.3 WEIGHING .................................................................................................................... 19

10.4 FUNCTIONS ................................................................................................................. 20

10.4.1 Parts Counting ..................................................................................................... 21

10.4.2 Percentage Weighing ........................................................................................... 22

10.4.3 Dynamic (Animal) Weighing ................................................................................. 23

10.4.4 Density Determination .......................................................................................... 25

11 RS-232 INTERFACE .......................................................................................................... 27

11.1 HARDWARE ................................................................................................................. 27

11.2 OUTPUT FORMATS ..................................................................................................... 27

11.2.1 SINGLE-LINE OUTPUT FORMAT ....................................................................... 27

11.2.2 STANDARD OUTPUT FORMAT .......................................................................... 28

11.2.3 CUSTOM OUTPUT FORMAT .............................................................................. 28

11.3 INPUT COMMANDS USING REMOTE KEYS ............................................................... 29

11.3.1 Invalid Input Command: ....................................................................................... 29

12 ERROR CHECKING .......................................................................................................... 31

13 SUPERVISOR MENUS ...................................................................................................... 32

13.1 ENABLE WEIGHING UNITS ......................................................................................... 32

13.2 ENABLE WEIGHING MODES ....................................................................................... 32

13.3 ENABLE SERIAL INTERFACE PARAMETERS ............................................................ 32

13.4 FORMAT OF CUSTOM FORMS #1 and #2 ................................................................... 33

13.5 SETUP PARAMETERS ................................................................................................. 34

13.6 CALIBRATION SETUP .................................................................................................. 35

13.7 PASSCODES ................................................................................................................ 35

14 ACCESSORIES & SPARE PARTS .................................................................................... 37

15 SAFETY AND MAINTENANCE .......................................................................................... 39

16 TROUBLE-SHOOTING ...................................................................................................... 40

16.1 TROUBLE-SHOOTING GUIDE. .................................................................................... 41

17 SERVICE INFORMATION .................................................................................................. 43

18 BALANCE MENU STRUCTURE ........................................................................................ 44

19 LANGUAGE TABLE ........................................................................................................... 47

20 WARRANTY INFORMATION ............................................................................................. 48

1 KNOW YOUR BALANCE

hank you for selecting the Nimbus Balance from Adam Equipment.

This Instruction Manual will familiarise you with the installation, use, general maintenance etc. of the balance, and will guide you through the various applications. It also covers accessories, trouble-shooting, after sales service information, and other important information.

These balances are highly accurate precision instruments and contain sensitive mechanisms and components. They should be transported and handled with care. When in operation, be careful to place loads gently on the weighing surface and do not overload or exceed recommended maximum capacity of the instrument or damage may occur.

Please read this Manual thoroughly before starting operation. If you need any clarifications, feel free to contact your supplier or Adam Equipment.

2 PRODUCT OVERVIEW

he Nimbus balances are ideal for laboratory and general purpose weighing. They can

also be used for some advanced weighing functions.

FEATURES:

• External menu-driven calibration allowing user-selectable range of calibration weights.

• Internal calibration (option) for outstanding accuracy without the need for manual calibration.

• Mains powered, with some models offering rechargeable battery pack option for cordless use.

• Solid die-cast aluminium alloy construction with 304 grade stainless steel pan for durability and

easy cleaning.

• Large easy to read LCD display with backlight.

• Standard applications include weighing, percentage weighing, parts counting, dynamic (animal)

weighing (not ‘j’ models), and solid and liquid density determination.

• Bi-directional RS-232 interface and USB interface as standard.

• External display option

• Can be configured to print a GLP Compliant report after each calibration to include the time, date,

balance number and a verification of the calibration.

• Force-restoration mechanism for supreme accuracy, or alloy load cell technology for stable yet accurate weighing.

• Automatic temperature compensation.

• Multiple weighing units.

• Easy to use, wipe-clean sealed membrane keypad.

• Below balance weighing facility (accessory hook required).

• Display in a choice of 4 languages – English, German, French & Spanish.

• Password protection.

• Security locking point.

3 PRODUCT SPECIFICATIONS

Nimbus NBL Models

(

Suffix e for external calibration models, Suffix i for internal calibration models)

Model # NBL 84 e/i NBL 124 e/i NBL 164 e/i NBL 214 e/i NBL 254 e/i NBL 214j e/i

Maximum Capacity

80 g 120 g 160 g 210 g 250 g 210 g

Readability (d) 0.0001 g 0.0002 g Number of

intervals n=

800000 1200000 1600000 2100000 2500000 2100000

Min. weight 0.01 g 0.02 g Repeatability

(Std. Dev)

0.00015 g 0.0002 g 0.0004 g

Linearity + 0.0002 g 0.0004 g

Units of Measure

grams, milligrams, carats, grains, Newtons, ounces, troy ounces,

pennyweight, custom

grams,

milligrams,

carats, Stabilization Time

Typically 3 seconds Operating Temp 15ºC to 35ºC recommended, 40 – 60 % RH (non-condensing) Power Supply

External mains power adapter - supplied as standard

(Input Voltage 100–240 VAC, 50/60 Hz) Input Voltage 18 VDC - 830 mA Weighing

mechanism

Force Restoration Balance Motor Calibration Suffix i = internal calibration mechanism, e = external calibration only External

Calibration Mass

Recommended OIML class: E2, ASTM / ANSI class: 1

50 g 100 g 100 g

Display LCD with blue backlight, 7 characters, 20 mm high, and symbols Draft Shield

(w x d x h)

Sliding door Draft Shield (165 x 145 x 240 mm)

Pan Size Round, 90mm diameter Overall

Dimensions (w x d x h)

220 x 310 x 323 mm

8.7 x 12.2 x 12.7 in

Net Weight

5.2 kg / 11 lb 9 oz (external calibration model)

5.9 kg / 13 lb 0 oz (internal calibration model)

Model # N

BL 223 e / i NBL 423 e / i

Maximum Capacity 220 g 420 g Readability (d) 0.001 g

Number of intervals n=

220000 420000

Min. 0.02 g 0.02 g Repeatability

(Std. Dev)

0.002 g

Linearity + 0.002 g Units of Measure

grams, milligrams, carats, grains, Newtons, ounces, troy ounces, pennyweight, custom

Stabilization Time Typically 3 seconds Operating Temp 15ºC to 35ºC recommended, 40 – 60 % RH (non-condensing)

Power Supply

External mains power adapter - supplied as standard

(Input Voltage 100–240 VAC, 50/60 Hz)

Factory-fit NiMH battery pack option.

Input Voltage 18 VDC - 830 mA Weighing

mechanism

Precision Load Cell Calibration Suffix i = internal calibration mechanism, e = external calibration only, External Calibration

Mass

Recommended OIML class: E2, ASTM / ANSI class: 2

100 g 200 g

Display LCD with blue backlight, 7 characters, 20 mm high, and symbols Draft Shield

(w x d x h)

Glass Ring Draft Shield With Alloy Lid (180 mm diam. x 90 mm)

Pan Size Round, 120 mm diameter Overall Dimensions

(w x d x h)

220 x 310 x 90 mm without breeze ring

8.7 x 12.2 x 3.5 in

Net Weight

3.1 kg / 6 lb 12 oz (external calibration model)

3.7 kg / 8 lb 8 oz (internal calibration model)

Model # N

BL 623 e / i NBL 823 e / i

Maximum Capacity 620 g 820 g Readability (d) 0.001 g

Number of intervals n=

620000 820000

Min. weight 0.02 g 0.02 g Repeatability

(Std. Dev)

0.002 g

Linearity + 0.002 g Units of Measure

grams, milligrams, carats, grains, Newtons, ounces, troy ounces, pennyweight, custom

Stabilization Time Typically 3 seconds Operating Temp 15ºC to 35ºC recommended, 40 – 60 % RH (non-condensing)

Power Supply

External mains power adapter - supplied as standard

(Input Voltage 100–240 VAC, 50/60 Hz) Input Voltage 18 VDC - 830 mA Weighing

mechanism

Force Restoration Balance Motor Calibration Suffix i = internal calibration mechanism, e = external calibration only External Calibration

Mass

Recommended OIML class: E2, ASTM / ANSI class: 2

500 g

Display LCD with blue backlight, 7 characters, 20 mm high, and symbols Draft Shield

(w x d x h)

Glass Ring Draft Shield With Alloy Lid (180 mm diam. x 90 mm)

Pan Size Round, 160 mm diameter Overall Dimensions

(w x d x h)

220 x 310 x 90 mm without breeze ring

8.7 x 12.2 x 3.5 in

Net Weight

4.0 kg / 8 lb 13 oz (external calibration model)

4.8 kg / 10 lb 9 oz (internal calibration model)

Model # N

BL 1602 e / i NBL 2602 e / i NBL 3602 e / i NBL 4602 e / i

Maximum Capacity

1600 g 2600 g 3600 g 4600 g

Readability (d) 0.01 g 0.01 g 0.01 g 0.01 g Number of

intervals n=

160000 260000 360000 460000

Min. weight 0.2 g 0.2 g 0.2 g 0.2 g Repeatability

(Std. Dev)

0.02 g Linearity + 0.02 g Units of Measure

grams, carats, grains, Newtons, ounces, troy ounces,

pennyweight, pounds, kilograms, custom

Stabilization Time Typically 3 seconds Operating Temp 15ºC to 35ºC recommended, 40 – 60 % RH (non-condensing)

Power Supply

External mains power adapter - supplied as standard

(Input Voltage 100–240 VAC, 50/60 Hz)

Factory-fit NiMH battery pack option. Input Voltage 18 VDC - 830 mA Weighing

mechanism

Precision Load Cell Calibration Suffix i = internal calibration mechanism, e = external calibration only External

Calibration Mass

Recommended OIML class: F1, ASTM / ANSI class: 3

1 kg 2 kg 2 kg 2 kg

Display LCD with blue backlight, 7 characters, 20 mm high, and symbols Draft Shield

(w x d x h)

None

Pan Size Round, 160 mm diameter Overall

Dimensions (w x d x h)

220 x 310 x 90 mm

8.7 x 12.2 x 3.5 in

Net Weight

3.1 kg / 6 lb 14 oz (external calibration model)

3.9 kg / 8 lb 10 oz (internal calibration model)

Model # N

BL 4201e NBL 6201e NBL 8201e

Maximum Capacity

4200g 6200g 8200g

Readability (d) 0.1g 0.1g 0.1g Number of

intervals n=

42000 62000 82000

Min. weight 2 g 2 g 2 g Repeatability

(Std. Dev)

0.1g Linearity + 0.1g Units of Measure

grams, carats, grains, Newtons, ounces, troy ounces,

pennyweight, pounds, kilograms, custom

Stabilization Time Typically 3 seconds Operating Temp 15ºC to 35ºC recommended, 40 – 60 % RH (non-condensing)

Power Supply

External mains power adapter - supplied as standard

(Input Voltage 100–240 VAC, 50/60 Hz)

Factory-fit NiMH battery pack option. Input Voltage 18 VDC - 830 mA Weighing

mechanism

Precision Load Cell Calibration External calibration only External

Calibration Mass

Recommended OIML class: F2, ASTM / ANSI class: 4

2 kg 2 kg

Display LCD with blue backlight, 7 characters, 20 mm high, and symbols Draft Shield

(w x d x h)

None

Pan Size Round, 160 mm diameter Overall

Dimensions (w x d x h)

220 x 310 x 90 mm

8.7 x 12.2 x 3.5 in

Net Weight 3.1 kg / 6 lb 14 oz

Model # NBL 12001e NBL 16001e NBL 22001e

Maximum Capacity

12000g 16000g 22000g

Readability (d) 0.1g 0.1g 0.1g Number of

intervals n=

120000 160000 220000

Min. weight 2 g 2 g 2 g Repeatability

(Std. Dev)

0.1g Linearity + 0.1g Units of Measure

grams, carats, grains, Newtons, ounces, troy ounces,

pennyweight, pounds, kilograms, custom

Stabilization Time Typically 3 seconds Operating Temp 15ºC to 35ºC recommended, 40 – 60 % RH (non-condensing)

Power Supply

External mains power adapter - supplied as standard

(Input Voltage 100–240 VAC, 50/60 Hz)

Factory-fit NiMH battery pack option. Input Voltage 18 VDC - 830 mA Weighing

mechanism

Precision Load Cell Calibration External calibration only External

Calibration Mass

Recommended OIML class: F2, ASTM / ANSI class: 4

5 kg 10 kg 10 kg

Display LCD with blue backlight, 7 characters, 20 mm high, and symbols Draft Shield

(w x d x h)

None

Pan Size 390 X 290 mm Overall

Dimensions (w x d x h)

390 x 480 x 100 mm (590 mm tall with pole accessory)

8.7 x 12.2 x 3.5 in

Net Weight 7.6 kg / 16 lb 12 oz

4 UNP

ACKING THE BALANCE

Remove the balance from the packing by carefully lifting it out of the box. Inside the box you will find everything needed to start using the balance-

• AC mains power adapter & cord

• Stainless Steel Top Pan

• Alloy sub-pan

• Draught shield (for mg models only)

• User documentation

Carefully follow the quick setup guide included to assemble the balance.

5 L

OCATING THE BALANCE

The balance should not be placed in a location that will reduce the accuracy.

Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.

Avoid unsuitable tables. The table or floor must be rigid and not vibrate.

Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.

Do not place near vibrating machinery. Avoid high humidity that might cause condensation.

Avoid direct contact with water. Do not spray or immerse the balances in water.

Avoid air movement such as from fans or opening doors. Do not place near open windows or air-conditioning vents.

Keep the balance clean. Do not stack material on the balances when they are not in use.

Avoid sources of static electricity. This can affect measurement accuracy and may damage sensitive electronics.

6 S

ETTING UP THE BALANCE

6.1 ASSEMBLING THE BALANCE

Carefully follow the included quick setup guide to assemble the balance. Ensure that you locate the balance on a solid level surface, free from vibration.

6.1.1 Levelling the balance

After placing the balance in a suitable location, level it by using the spirit level on the front of the balance. To level the balance turn the two adjustable feet at the rear of the balance until the bubble in the spirit level is centred.

6.1.2 Warm-Up Time

Before you start weighing, you should allow the balance to achieve a stable internal t

emperature. For accurate weighing to the manufacturer’s specification it is important to power on the balance and allow to warm up for at least 6 hours for load cell mechanisms, and 12 hours for force motor mechanisms.

6.1.3 Weighing

nsert the power supply cable DC connector to the connector on the rear of the balance. Plug the power supply module into the mains and press the power switch on the keypad to turn on the balance. The display will indicate the balance serial number followed by the software revision number, followed by the maximum capacity of the balance. Next the balance will run a selftest by displaying all segments followed by a busy symbol and a line of 7 dashes indicating the balance is in busy mode. Once ready, the display will show a zero weight reading, accompanied by the 0 symbol.

ce a suitable warm-up period is complete and you are ready to start weighing, place an item to be weighed on the balance. A stable symbol is shown when the balance is in stable condition. It will turn off if the balance is not stable. Exact zero is shown when the “0“ symbol is visible on the top left of the display area.

6.2 CALIBRATION

Units with an ‘i’ suffix can be calibrated using either internal calibration mechanism or by u

sing an external mass. Units with an ‘e’ suffix can only be calibrated with an external mass. Internal calibration option must be enabled in the setup menu options or else external calibration mode will be used when the [Cal] key is pressed.

6.2.1 Manual Calibration

Pressing the [Cal] key will start calibration. Calibration can also be initiated by a change in internal temperature or a set time period as determined by the user.

Pressing [0

/T] will abort the calibration at any time.

Calibration should be performed carefully and in conditions of no vibration, air movement or other disturbance. Make sure the pan is empty, clean, and correctly fitted.

6.2.2 Calibration using Internal Calibration mass (if fitted)

Note: Internal calibration (if fitted) will only initiate if it is enabled as the default calibration method in the Supervisor level calibration setup menu.

On pressing the [Cal] key the display will show the busy symbol and a line of 7 dashes and then after a few seconds will display ‘CALIBRA

CALIBRACALIBRA

CALIBRA’. Then the busy symbol and a line of 7

dashes will reappear, followed by ‘CAL On

CAL OnCAL On

CAL On’. Then ‘CALIbrA

CALIbrACALIbrA

CALIbrA’ will appear again, followed by

the busy symbol and a line of dashes. Finally ‘CAL OFF

CAL OFFCAL OFF

CAL OFF’ will be displayed, followed by a

beep and the busy symbol and a line of dashes. A final beep will sound the end of calibration and the display should return to ‘0

0.000

000000

000 g’ or similar. Internal calibration is now

complete and normal operations may proceed.

6.2.3 Calibration using External Calibration mass

Note: Calibration mass used should be a known accurate item, ideally with an OIML o

r ASTM/ANSI classification appropriate to the accuracy of the balance.

On pressing the [Cal] key the display will show the balance setting a new Zero condition by showing “LOAD 0

LOAD 0LOAD 0

LOAD 0”. Make sure the pan is empty then press the [Setup] key to continue

The display will show the busy symbol and a line of dashes and then after a few seconds will display the required calibration mass. For example, for a 213e model the display will

be “LOAd 100

LOAd 100LOAd 100

LOAd 100 g” where 100 g is the required calibration mass.

Place the selected mass on the balance. The balance will automatically continue. The display will show the busy symbol and a line of dashes and after calibration is complete it

will sound a beep and display “vNLOAD

vNLOADvNLOAD

vNLOAD”. Remove the weight. Another beep will be heard

confirming the unloading action. The balance will display the busy symbol and a line of dashes for a few seconds and then sound a beep and return to normal weighing.

6.2.4 Automatic Calibration

The balance will indicate the need for calibration when the balance has automatic ca

libration enabled and the set pre-conditions for automatic calibration have been met.

Conditions that will trigger an automatic calibration are:

• Internal temperature change greater than a pre-set amount (typically 2ºC for P

recision balances).

• Time since last calibration exceeds a pre-set time (typically 4 hours, or 15 minutes after power is applied).

The balance will indicate the need for calibration to be carried out by flashing the “

CAL

”

symbol on the display. As soon as the balance is calibrated the symbol will be turned off. The Auto calibration feature can be enabled, disabled or changed within the user options

to meet the requirements of the users.

6.2.5 Calibration Errors

Occasionally during calibration an error will be detected. These errors can be caused by:

•

Unstable readings

• Improper calibration weights being used

• Large shifts of zero from the factory settings

When an error is found a displayed message will be shown and the calibration must be done again. If the balance has error messages more than once it is possible the mechanics have been damaged.

7 DI

SPLAY

The LCD has several areasA large 7 digit area to display the weight with symbols for common weighing units on its

right and symbols for zero, tare (Net) and stability on the left. Text symbols above the display show the current operation or function being used.

7.1 SYMBOLS AND TEXT

The LCD has unique symbols to indicate the following:

0

Busy Stable

mg, kg,

ct,

dwt, GN, ozt,

oz,

N, Custom, g/cc, Pcs, %,

Symbols shown for units and modes Battery charge symbol

Indicators:

“CAL”

When calibration is occurring or about to occur

“T”

For a time driven calibration

“ºC”

When a temperature is shown or a temperature driven calibration is to occur

“Net”

When a net weight is shown

“

Dynamic

”

When the balance is in the animal weighing mode

“

Hold

”

When the balance is in hold mode

“Parts

”

When the balance is in the Parts counting mode

“Percent

”

When the balance is in the Percent weighing mode

“Density S

olid

”

When the balance is in the Solid Density mode

“Density L

iquid

”

When the balance is in the Liquid Density mode

8 KE

YPAD

The keypad has the following keys to operate the balance.

Keys

Primary function

[POWER] To turn the balance to ON or Standby

[0/T]

[0/T] A combined zero and tare function. To escape from setup functions and modes.

[Cal]

[Cal] Starts the calibration function

[Print] [Print] Instructs the balance to print data

[Mode] [Mode] Enters the Mode Selection Menu

[Unit]

[Unit] Selects weighing units by cycling through a set of

enabled units.

[Setup]

[Setup

]

Enters the setup parameters (Supervisor Menus). Enters a function or saves a value while manually entering unit weight or check weighing limits.

+ 36 hidden pages

Adam Equipment NBL 6201e, NBL 8201e, NBL 16001e, NBL 12001e, NBL 22001e Operating Manual

Specifications and Main Features

Frequently Asked Questions

User Manual