Adam Equipment CKT 16UH, CKT 8UH, CKT 32UH, CKT 48UH Instruction Manual

AdamEquipment

Cruiser

(CKT & CKT-M) SERIES

Adam Equipment strives to be more environmentally focused and uses recycled materials and environmentally friendly packaging where possible. As part of this initiative we have developed a short form manual that uses less paper and ink to describe the main functions of your new Adam scale. A complete version is available at www.adamequipment.com. Thank you for your support of Adam Equipment and we hope that you enjoy your new scale.

1.0 CONTENTS

PN 3.02.6.6.14038 Rev 2, July 2018

1.0 INTRODUCTION ................................................................................................................. 2

2.0 SPECIFICATIONS ............................................................................................................... 2

OTHER SPECIFICATIONS ......................................................................................................... 5

Key descriptions .............................................................................................................................. 6

3.0 OPERATION ....................................................................................................................... 7

3.1 SETTING UP AND TURN ON THE SCALE ..................................................................... 7

3.2 ZEROING THE DISPLAY ................................................................................................ 7

3.3 TARING ........................................................................................................................... 8

3.4 WEIGHING ...................................................................................................................... 8

3.5  PARTS COUNTING ......................................................................................................... 9

3.6 CHECK COUNTING ...................................................................................................... 10

3.7  PERCENT WEIGHING .................................................................................................. 11

3.8 ACCUMULATED TOTALS ............................................................................................. 12

4.0  RS-232 INTERFACE ......................................................................................................... 14

4.1 INPUT COMMANDS FORMAT ...................................................................................... 14

4.2  RS-232 SETUP .............................................................................................................. 15

4.3  USB SETUP ................................................................................................................... 15

5.0  CALIBRATION ............................................................................................................... 16

5.1  CKT CALIBRATION ....................................................................................................... 16

6.0 BATTERY .......................................................................................................................... 17

7.0 MODULE OPTION COVERS/ BOARDS ........................................................................... 17

8.0 REAL TIME CLOCK SETUP ............................................................................................. 18

9.0 ERROR CODES ................................................................................................................ 19

10.0  SERVICE INFORMATION ................................................................................................. 20

WARRANTY INFORMATION ....................................................................................................... 21



1.0 INTRODUCTION

 The Cruiser Checkweighing (CKT) series provides accurate and reliable weighing for

stock control and general warehouse applications

 There are 4 models in the CKT series:

1. CKT

2. CKT-UH

3. CKT-M

4. CKTa

 Cruiser checkweighing scales can weigh in pound, gram or kilogram weighing units.  The scales have stainless steel weighing platforms on an ABS base assembly.  All scales are supplied with an RS-232 bi-directional interface and real time clock.  The scales have a sealed keypad with colour coded membrane switches and a large,

easy to read liquid crystal type display (LCD). with backlight.

 The scales include automatic zero tracking, LED checkweighing lights with selectable

Hi/Low limits, automatic tare, pre-set tare, an accumulation facility that allows the count to be stored and recalled as an accumulated total.

2.0 SPECIFICATIONS

Kilograms

Maximum

CKT 4 CKT 8H CKT 8 CKT 16 CKT 32 CKT 48

4 kg 8 kg 8 kg 16 kg 32 kg 48 kg

Capacity

Tare Range -4 kg -8 kg -8 kg -16 kg -32 kg -48 kg

Readability 0.0001 kg 0.0001 kg 0.0002 kg 0.0005 kg 0.001 kg 0.002 kg

Repeatability

0.0001 kg 0.0001 kg 0.0002 kg 0.0005 kg 0.001 kg 0.002 kg

(S.D.)

Linearity (±) 0.0002 kg 0.0002 kg 0.0004 kg 0.001 kg 0.002 kg 0.004 kg

Grams

Maximum

4000 g 8000 g 8000 g 16000 g 32000 g 48000 g

Capacity

Tare Range -4000 g -8000 g -8000 g -16000 g -32000 g -48000 g

Readability 0.1 g 0.1 g 0.2 g 0.5 g 1 g 2 g

Repeatability

0.1 g 0.1 g 0.2 g 0.5 g 1 g 2 g

(S.D.)

Linearity (±) 0.2 g 0.2 g 0.4 g 1 g 2 g 4 g

CKTa Series (USA models)

Pounds

Maximum

CKT 8H CKT 16UH CKT 32UH CKT 48UH

8 lb 16 lb 35 lb 70 lb

Capacity

Tare Range -8 lb -9.9995 lb -35 lb -70 lb

Readability 0.0002 lb 0.0002 lb 0.001 lb 0.002 lb

Repeatability

0.0002 lb 0.0002 lb 0.001 lb 0.002 lb

(S.D.)

Linearity (±) 0.0004 lb 0.0004 lb 0.002 lb 0.004 lb

Ounces

Maximum

128 oz 256 oz 560 oz 1120 oz

Capacity

Readability 0.005 oz 0.005 oz 0.02 oz 0.05 oz

Repeatability

0.005 oz 0.005 oz 0.02 oz 0.05 oz

(S.D.)

Linearity (±) 0.01 oz 0.01 oz 0.04 oz 0.1 oz

Pounds: Ounces

Maximum Capacity

8 lb: 0.0 oz 16 lb:

0.0 oz

35 lb:

0.0 oz

70 lb:

0.0 oz

Display shows 8:_16.00 16:_16.0 35:_16.0 70:_16.0

Readability 0.01 oz 0.1 oz 0.1 oz 0.1 oz

Repeatability

0.01 oz 0.1 oz 0.1 oz 0.1 oz

(S.D.)

Linearity (±) 0.02 oz 0.2 oz 0.2 oz 0.2 oz

Kilograms

Maximum

4 kg 8 kg 16 kg 32 kg

Capacity

Readability 0.0001 kg 0.0001 kg 0.0005 kg 0.001 kg

Repeatability

0.0001 kg 0.0001 kg 0.0005 kg 0.001 kg

(S.D.)

Linearity (±) 0.0002 kg 0.0002 kg 0.001 kg 0.002 kg

Grams

Maximum

4000 g 8000 g 16000 g 32000 g

Capacity

Readability 0.1 g 0.1 g 0.5 g 1 g

Repeatability

0.1 g 0.1 g 0.5 g 1 g

(S.D.)

Linearity (±) 0.2 g 0.2 g 1 g 2 g

Units of measure

Interface

Stabilisation Time

Operating Temperature

Power supply

Battery

Calibration

Display

CKT Series- kg, g

CKTa Series- kg, g, lb, oz, lb:oz

RS-232 bi-directional Interface

2 Seconds typical

-10°C to 40°C 14°F to 104°F

230 VAC 50/60 Hz 115 VAC available

Internal rechargeable battery (~90 hours operation)

Automatic External

6 digits LCD digital display

with capacity tracker and symbols for units

Scale Housing

ABS Plastic, Stainless Steel platform

Pan Size

Overall Dimensions (wxdxh)

315 x 355 x 110 mm

12.4” x 14” x 4.3”

Net Weight

Applications

Functions

Weighing, Parts counting, % weighing, Check weighing,

Weighing Scales

Check counting, Accumulation of weights.

Date/Time

Real Time Clock (RTC),

To print date and time information- battery backed

210 x 300 mm

8.3” x 11.8”

4.4 kg

9.7 lb

CKT 4M CKT 8M CKT 20M CKT 40M

Grams

Max 4000 g 8000 g 20000 g 40000 g

e = 1 g 2 g 5 g 10 g

n = 3000 3000 3000 3000

Kilograms

Max 4 kg 8 kg 20 kg 40 kg

e = 0.001 kg 0.002 kg 0.005 kg 0.01 kg

OTHER SPECIFICATIONS

Units of measure kg, g

Tare

Full

Interface

RS-232 bi-directional Interface

Stabilisation Time

Operating Temperature

Power supply

-10°C to 40°C / 14°F to 104°F

2 Seconds typical

230 VAC 50/60 Hz 115 VAC available

Battery Internal rechargeable battery (~90 hours operation)

*Calibration *Not permitted

6 digits LCD digital display

Display

with capacity tracker and symbols for units

Scale Housing ABS Plastic, Stainless Steel platform

Pan Size 210 x 300mm

8.3” x 11.8”

Overall Dimensions (wxdxh)

Net Weight

Applications

315 x 355 x 110 mm

12.4” x 14” x 4.3”

4.1 kg / 9 lb

Weighing Scales

Functions

Check counting, Accumulation of weights.

Real Time Clock (RTC),

Weighing, Parts counting, % weighing, Check weighing,

Date/Time

To print date and time information- battery backed

NOTE: For use in approved applications the scales do not

come with the RS-232 interface.

Key descriptions

[0-9]

Numeric entry keys to set the unit price.

[CE]

Clears an erroneous entry or return to normal operation.

[Tare] or key Sets the scale to display zero weight when an empty container is placed on the platform or removed again. Also works as an [Enter] key

[MR]

The memory key shows the accumulation number and total weight

[SETUP]

Brings up the setup menu for changing date, time, power etc.

[Zero] or key It sets the zero when the platform is empty and no tare value is entered. Also works as an

[Esc] key

[Print M+]

It sends the results of the current displays to the RS-232 interface.

[SMPL]

This is used to enter the number of items of a sample

[Units]

This key is used to enter the weight of a sample manually. It will also change the weighing units when other units are enabled.

[High Limit]

Used to set the ‘high’ limit when checkweighing

[Low Limit]

Used to set the ‘low’ limit when checkweighing

[Lim] It stores and recalls any of 10 preset limits

[Func]This is used to switch between weighing functions e.g parts counting, weighing or percentage weighing. Also used to select RS-232 parameters.

3.0 OPERATION

3.1 SETTING UP AND TURN ON THE SCALE

Follow this set up when using the scale for first time:

1) Place the platform in the locating holes on the top cover.

2) Level the scale by adjusting the four feet. Ensure the bubble in the spirit level is in the centre of the level and the scale is supported by all four feet.

3) Attach the power cable to the connector located on the base to the left of the scale.

4) Plug the power cable into the mains.

5) Press the power button located on scale keypad.

6) The scale will then display the software revision and run a self-test.

7) Once the self-test has been completed and a stable condition achieved, the scale will display zero weight alongside stable and zero symbol indicators.

Battery compartment

USB

Mains connection

connectivity port

3.2 ZEROING THE DISPLAY

You can press the [Zero]/0

Esc

key at any time to set the zero point. When the zero point

is obtained, the display will show the indicator for zero.

The scale has a re-zeroing function to account for minor drifting or accumulation of material on the platform. Press [Zero]/0

Esc

to re-zero the scale if small amounts of weight are still

shown when the platform is empty.

+ 16 hidden pages