Adam Equipment
CBW SERIES
(P.N. 4276, Rev. B9, May 2007)
Software rev.: 1.2- 2.04
(For CBW 6H / 12aH, rev.:1.4-3.00)
© Adam Equipment Company 2007
© Adam Equipment Company 2007
CONTENTS
1.0 |
INTRODUCTION............................................................................................................ |
2 |
2.0 |
SPECIFICATIONS ......................................................................................................... |
3 |
3.0 |
INSTALLATION.............................................................................................................. |
5 |
3.1 |
LOCATING THE SCALE ............................................................................................ |
5 |
3.2 |
INSTALLATION OF CBW SERIES............................................................................. |
5 |
4.0 |
KEY DESCRIPTIONS .................................................................................................... |
6 |
5.0 |
DISPLAYS ..................................................................................................................... |
8 |
6.0 |
OPERATION.................................................................................................................. |
8 |
6.1 |
ZEROING THE DISPLAY........................................................................................... |
8 |
6.2 |
TARING...................................................................................................................... |
9 |
6.3 |
WEIGHING A SAMPLE .............................................................................................. |
9 |
6.4 |
PERCENT WEIGHING............................................................................................... |
9 |
6.5 |
PARTS COUNTING ................................................................................................. |
10 |
6.6 |
CHECK-WEIGHING ................................................................................................. |
10 |
6.6.1 Setting up Check-weighing while weighing........................................................ |
11 |
|
6.6.2 Setting up Checkweighing while Parts Counting ............................................... |
12 |
|
6.7 |
ACCUMULATED TOTAL.......................................................................................... |
12 |
6.8 |
MANUAL ACCUMULATION ..................................................................................... |
13 |
6.9 |
AUTOMATIC ACCUMULATION............................................................................... |
14 |
7.0 |
PARAMETERS ............................................................................................................ |
14 |
7.1 |
INCREMENT VALUE ............................................................................................... |
15 |
7.2 |
CONTROL THE BACKLIGHT................................................................................... |
15 |
7.3 |
AUTOMATIC ACCUMULATION............................................................................... |
15 |
7.4 |
ACCUMULATION OF DATA IN MEMORY WHEN [PRINT] IS PRESSED............... |
16 |
7.5 |
AUTO ZERO RANGE............................................................................................... |
16 |
7.6 |
SELECTABLE UNIT OF WEIGHT DISPLAYED....................................................... |
16 |
7.7 |
SETTING OF THE CHECK WEIGHING ALARM...................................................... |
17 |
7.8 |
SPEED AT WHICH THE MACHINE WILL RUN THE ADC ...................................... |
17 |
8.0 |
BATTERY OPERATION .............................................................................................. |
18 |
9.0 |
RS-232 INTERFACE.................................................................................................... |
19 |
9.1 |
INPUT COMMANDS FORMAT ................................................................................ |
20 |
10.0 |
CALIBRATION ............................................................................................................. |
21 |
11.0 |
ERROR CODES .......................................................................................................... |
22 |
12.0 REPLACEMENT PARTS AND ACCESSORIES .......................................................... |
23 |
|
13.0 |
SERVICE INFORMATION ........................................................................................... |
23 |
© Adam Equipment Company 2007 |
1 |
•The CBW series of scales provide an accurate, fast and versatile series of general purpose weighing scales with counting, % weighing and check-weighing functions.
•There are 2 series of scales - CBW scales which use kilograms as the default unit and the CBWa range of scales have changeable units from pounds to kilograms. The scales in these series share the same functions except the CBWa series have the ability to change the weighing units.
•There are 6 models in each series with capacities up to 45 kg / 100 lb.
•These all have stainless steel weighing platforms on an ABS base assembly.
•All scales have sealed keypads with colour coded membrane switches and the displays are large easy to read liquid crystal type displays (LCD). The LCD’s are supplied with a backlight.
•The scales include automatic zero tracking, audible alarm for preset weights, automatic tare, an accumulation facility that allows the count to be stored and recalled as an accumulated total and bi-directional RS-232 interface for communicating with a PC or printer.
© Adam Equipment Company 2007 |
2 |
CBW SERIES
Model # |
CBW 3 |
CBW 6H |
CBW 6 |
|
CBW 15 |
CBW 30 |
CBW 45 |
Maximum Capacity |
3 kg |
6 kg |
6 kg |
|
15 kg |
30 kg |
45 kg |
Readability |
0.1 g |
0.1 g |
0.2 g |
|
0.5 g |
1 g |
2 g |
Tare Range |
-3 kg |
-6 kg |
-6 kg |
|
-10 kg |
-30 kg |
-45 kg |
Repeatability (Std. |
0.1 g |
0.1 g |
0.2 g |
|
0.5 g |
1 g |
2 g |
Dev.) |
|
|
|
|
|
|
|
Linearity ± |
0.2 g |
0.2 g |
0.4 g |
|
1 g |
2 g |
4 g |
Units of measure |
|
|
Kg, |
g |
|
|
|
CBWa SERIES
Model: CBW-6a
UNITS OF |
MAXIMUM |
TARE |
READABILITY |
REPEATABILITY |
LINEARITY |
MEASURE |
CAPACITY |
RANGE |
|
|
|
Grams |
3000.0 g |
-3000.0 g |
0.1 g |
0.1 g |
0.2 g |
Kilograms |
3.0000 kg |
-3 kg |
0.0001 kg |
0.0001 kg |
0.0002 kg |
Pounds |
6.0000 lb |
-6 lb |
0.0002 lb |
0.0002 lb |
0.0004 lb |
Pounds/Ounces |
6 lb 0.0 oz |
-6 lb 0.0 oz |
0.1 oz |
0.1 oz |
0.1 oz |
Model: CBW-12aH
UNITS OF |
MAXIMUM |
TARE |
READABILITY |
REPEATABILITY |
LINEARITY |
MEASURE |
CAPACITY |
RANGE |
|
|
|
Grams |
6000.0 g |
-6000.0 g |
0.1 g |
0.1 g |
0.2 g |
Kilograms |
6.0000 kg |
-6 kg |
0.0001 kg |
0.0001 kg |
0.0002 kg |
Pounds |
12 lb |
-9.9998 lb |
0.0002 lb |
0.0002 lb |
0.0004 lb |
Pounds/Ounces |
12 lb |
-9 lb 15.9oz |
0 to 10 lb:0.01oz |
0.01 oz |
0.02 oz |
|
|
|
10 to12 lb:0.1oz |
|
|
Model: CBW-12a
UNITS OF |
MAXIMUM |
TARE |
READABILITY |
REPEATABILIT |
LINEARITY |
MEASURE |
CAPACITY |
RANGE |
|
Y |
|
Grams |
6000.0 g |
-6000.0 g |
0.2 g |
0.2 g |
0.4 g |
Kilograms |
6.0000 kg |
-6 kg |
0.0002 kg |
0.0002 kg |
0.0004 kg |
Pounds |
12 lb |
-9.9995 lb |
0.0005 lb |
0.0005 lb |
0.001 lb |
Pounds/Ounces |
12 oz |
-9 lb 15.9 oz |
0.1 oz |
0.1 oz |
0.1 oz |
© Adam Equipment Company 2007 |
3 |
Model: CBW-35a
UNITS OF |
MAXIMUM |
TARE |
READABILITY |
REPEATABILIT |
LINEARITY |
MEASURE |
CAPACITY |
RANGE |
|
Y |
|
Grams |
15000.0 g |
-10000.0 g |
0.5 g |
0.5 g |
1 g |
Kilograms |
15.0000 kg |
-10 kg |
0.0005 kg |
0.0005 kg |
0.001 kg |
Pounds |
35.000 lb |
-35 lb |
0.001 lb |
0.001 lb |
0.002 lb |
Pounds/Ounces |
35 lb 0.0 oz |
-35 lb 0.0 oz |
0.1 oz |
0.1 oz |
0.1 oz |
Model: CBW-65a
UNITS OF |
MAXIMUM |
TARE |
READABILITY |
REPEATABILIT |
LINEARITY |
MEASURE |
CAPACITY |
RANGE |
|
Y |
|
Grams |
30000 g |
-30000 g |
1 g |
1 g |
2 g |
Kilograms |
30.000 kg |
-30 kg |
0.001 kg |
0.001 kg |
0.002 kg |
Pounds |
65.000 lb |
-65 lb |
0.002 lb |
0.002 lb |
0.004 lb |
Pounds/Ounces |
65 lb 0.0oz |
-65 lb 0.0 oz |
0.1 oz |
0.1 oz |
0.1 oz |
Model: CBW-100a
UNITS OF |
MAXIMUM |
TARE |
READABILITY |
REPEATABILIT |
LINEARITY |
MEASURE |
CAPACITY |
RANGE |
|
Y |
|
Grams |
45000 g |
-45000 g |
2 g |
2 g |
4 g |
Kilograms |
45.000 kg |
-45 kg |
0.002 kg |
0.002 kg |
0.004 kg |
Pounds |
100 lb |
-99 lb |
0.005 lb |
0.005 lb |
0.01 lb |
Pounds/Ounces |
99lb15.0 oz |
-99 lb 15.0 oz |
0.1 oz |
0.1 oz |
0.2 oz |
|
Common Specifications for CBW and CBWa |
Interface |
RS-232 bi-directional Interface |
Stabilisation Time |
2 Seconds typical |
Operating |
0°C - 40°C |
Temperature |
32°F - 104°F |
Power supply |
9 VDC, 800 mA |
|
Through an external adapter |
Battery |
Internal rechargeable battery (~70 hours operation) |
|
|
Calibration |
Automatic External |
Display |
6 digits LCD digital display |
Scale Housing |
ABS Plastic, Stainless Steel platform |
|
|
Pan Size |
225 x 275 mm / 8.9” x 10.8” |
|
|
Overall |
315 x 355 x 110 mm |
Dimensions |
12.4” x 14” x 4.3” |
(wxdxh) |
|
Net Weight |
4.1 kg / 9 lb |
Applications |
Weighing Scales |
Functions |
Weighing, parts counting, % weighing, Checkweighing |
© Adam Equipment Company 2007 |
4 |
•The scales should not be placed in a location that will reduce the accuracy.
•Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.
•Avoid unsuitable tables. The table or floor must be rigid and not vibrate.
•Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.
•Do not place near vibrating machinery.
•Avoid high humidity that might cause condensation. Avoid direct contact with water. Do not spray or immerse the scales in water.
•Avoid air movement such as from fans or opening doors. Do not place near open windows or air-conditioning vents.
•Keep the scales clean. Do not stack material on the scales when they are not in use.
•The CBW Series comes with a stainless steel platform packed separately.
•Place the platform in the locating holes on the top cover.
•Do not press with excessive force as this could damage the load cell inside.
•Level the scale by adjusting the four feet. The scale should be adjusted such that the bubble in the spirit level is in the centre of
© Adam Equipment Company 2007 |
5 |
the level and the scale is supported by all four feet.
•Attach the power supply cable to the connector on the bottom of the scale. Plug in the power supply module. The power switch is located on the base on the right side of the scale.
•The scale will first display the model number (CBW 30where 30 denotes the capacity of the scale in kg), followed by the revision numbers (1.2-2.03 where 1.2 is the current hardware revision number of the main circuit board and 2.03 is the current software revision number). A self-test is followed next. At the end of the self-test it will display “ZERO”, if the zero condition has been achieved. A stable symbol and “GROSS” indicators are also displayed.
KEYS PRIMARY FUNCTION
[Zero] Sets the zero point for all subsequent weighing. The display shows zero.
[Tare] It tares the scale and stores the current weight in memory as a tare value, subtracts the tare value from the weight and shows the results. This is the net weight.
SECONDARY FUNCTION
or |
[Enter] |
key |
when |
setting parameters |
or |
other |
|
functions. |
|
|
|
A secondary |
function |
|
is |
available to increment the active digit when setting a value for parameters or other functions.
© Adam Equipment Company 2007 |
6 |
[Limit] |
It sets the limits for check |
||
|
weighing and allows setting of |
||
|
either the low limit or the high |
||
|
limit or both. |
|
|
[%] |
It enters the percent weighing |
||
|
function. |
Allows the weight, |
|
|
unit weight, and count to be |
||
|
seen when parts counting. |
||
[Func] |
This is used to select the |
||
|
function of the scale. When |
||
|
the scale is weighing, it will |
||
|
select parts counting. When it |
||
|
is not in the weighing mode it |
||
|
will return the user to weighing. |
||
[Print] |
It is used to print the results to |
||
|
a PC or printer using the RS- |
||
|
232 interface. It also adds the |
||
|
value to |
the |
accumulation |
|
memory if |
the |
accumulation |
function is not automatic.
[Units] It is used to change the weighing units of the display from kilograms to grams and back to kilograms for CBW series.
For CBWa scales this key will select kilograms, grams,
Pounds and Pounds/ounces for the weighing unit, if enabled. This should only be done in gross weighing or at zero.
A secondary function
is available to move the active digit to the right when setting values for parameters or other functions.
A secondary function is available to move the active digit to the left when setting values for parameters or other functions.
A secondary function [C] is available to act as a clear key when setting values for parameters or other functions.
A secondary function [ESC] is used to return to normal operation when the scale is in a parameter setting mode.
None.
© Adam Equipment Company 2007 |
7 |