Adamatic 718LCG, 724CG, 734CG User Manual
718LCG, 724CG, 734CG
Floor Model Gas Fryers
Belshaw Adamatic floor model gas fryers are
designed to efficiently produce all varieties of cake
donut and yeast raised donut. Almost any size and
shape of donut (or similar product) can be fried in
these adaptable and dependable fryers.
▪ Compact. The space needed to operate a Belshaw
Adamatic 718LCG gas or electric fryer is just 6
feet x 3½ feet (1.8m x 1.1m), including cake donut
depositor and open drain tray. Larger models need
only slightly increased space allowance.
▪ Productive. You can make from 65 to 150 dozen
donuts per hour on one of three standard sizes.
That leaves more time to finish and customize your
donuts exactly the way you want.
▪ Efficient. Belshaw Adamatic’s ‘Controlled
Combustion’ burner tube technology maximizes
gas efficiency and generates energy savings
throughout the life of the fryer.
▪ Convenient. With a Belshaw Adamatic Open Kettle
donut system, the fryer, cake donut depositor,
and filtration system are each designed to work
together. Easy-to-use submerger screens can be
added to further improve production efficiency.
Products made commercially using floor
model gas fryers:
▪ Donuts
▪ Hushpuppies
▪ Loukoumades
▪ Funnel cakes
▪ Elephant ears
▪ Fried pies
▪ Falafel
▪ Paczkis, porogis
Belshaw provides a full line of
complementary equipment designed for
donut production:
▪ EP18-24 Proofing Cabinet
▪ Type ‘B’ or Type F cake donut depositors
▪ EZ Melt Shortening Melter-Filter
▪ SF Shortening Filter
▪ HI18/HI24 Production Icers
▪ H&I-2 / H&I-4 Icing Tables
▪ HG, HGEZ Hand Glazers
▪ Fritters, fried dough
▪ Crab cakes, clam
strips
▪ Fried corn
▪ Fried vegetables
▪ Tortilla Chips
+ More fried goods of
all kinds
Product Line
718LCG
Holds up to
24 Donuts
Capacity approx
65-80
dozen/hour
724CG
Holds up to
36 Donuts
Capacity approx
80-120
dozen/hour
734CG
Holds up to
48 Donuts
Capacity approx
130-150
dozen/hr
Floor Model Donut Fryers (Gas)
718LCG, 724CG, 734CG
Belshaw 724CG Gas Fryer
(shown with optional Type 'F’
donut depositor, EZ Melt filter
and submerger screen)
18" (46cm)
24" (61cm)
34" (86cm)
718-24-34/
03-2013Models
26"
(66cm)
24"
(61cm)
24"
(61cm)
SPEC
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP SPA
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
SPEC
718-24-34/
03-2013
Page 1 of 2
Product Line
Models
Floor Model Gas Fryers
718LCG, 724CG, 734CG
SPEC
718-24-34/
03-2013
B
A
C
64"
(163 cm )
POWER CONNECTION
½" GAS PIPE CONNECTION
10"
(25 cm )
2"
(5 cm)
Power cord
96" (2.43m)
P P
G
STANDARD FEATURES
▪ Stainless steel cabinet, kettle, and drain tray, with
sloping surface around fryer kettle
▪ Electronic ignition (standing pilot optional, see below)
▪ Digital electronic thermostat control (non-electric
thermostat control optional, see below)
▪ High-temperature limit switch set to approximately 450°
F (230° C)
▪ Exhaust flue
▪ Adjustable, bolt down legs
▪ Drain tray on right side of fryer. Can easily be relocated
to left side.
▪ Heavy duty drain and valve with exterior handle
▪ Reinforced left side panel to accept Belshaw cake donut
depositor mount. (Can be switched to right side)
▪ 2 nickel plated cake donut frying screens with bolt-on
heat dissipating handles
▪ Backsplash
▪ Frame reinforcement for mounting a Belshaw Cake
Donut Depositor, installed at left. Can be moved to right.
▪ 120 Volts or 240 Volts, 50/60Hz, 1-phase (specify)
▪ Natural Gas and Propane models are available. A
conversion kit is available if changeover is needed
▪ ETL certified to NSF-4, ANSI Z83.11a and
CSA1.8a.2004
OPTIONS AND ACCESSORIES
▪ Standing pilot ignition and thermocouple temperature
control – no electricity required. (Standing pilot models
are designated: 718LFG, 724FG, 734FG)
▪ Submerger screen
▪ Draft inducer kit (recommended for Propane models,
and for Natural Gas above 3,000 ft)
▪ Type B (manual) or Type F (electric) cake donut
depositor
▪ 'SF' or 'EZMelt' filtration systems
▪ Proofing screens for raised donuts
▪ Screen Cradle
D
CLEARANCE: Allow 2 inches (5 cm)
on all four sides between fryer and
any construction
Exhaust flue
ETL certified to NSF-4, ANSI
Z83.11a and CSA1.8a.2004
6"
(15 cm )
DRAIN VALVE
HANDLE
G
Power cord
96" (2.43m)
POWER
CONNECTION
SPECIFICATIONS 718LCG 724CG 734CG
inches
cm
inches
lbs
kg
gallons
liters
inches
pascal
connector
volts
amps
inches
cm
inches
cm
inches
cm
inches
cm
inches
cm
lbs
kg
18” x 26” 24” x 24” 34” x 24”
46 x 66 cm 61 x 61 cm 86 x 61 cm
17" x 25" 23" x 23" 33" x 23"
96 lbs 119 lbs 215 lbs
44 kg 54 kg 98 kg
13 gal 16 gal 29 gal
49 L 61 L 110 L
Natural Gas 5"-14" W.C – Propane 11"-14" W.C.
Natural Gas:1.24–3.4 kpa – Propane: 2.4-3.4 kpa
1/2" NPT
120V-50/60-1 or 240V-50/60-1 (specify)
0.5 A @120V or 0.25 A @240V
27" 32" 42"
69 cm 81 cm 107 cm
48" 56" 77"
122 cm 142 cm 196 cm
64" 64" 64"
163 cm 163 cm 163 cm
40" 38" 38"
102 cm 97 cm 97 cm
40 x 48 x 54 40 x 48 x 54" 50 x 45 x 52
102x122x137 102x122x137 127x114x132
282 lbs 296 lbs 417 lbs
128 kg 135 kg 190 kg
FRYING AREA
SCREEN SIZE
SHORTENING CAPACITY
(approx)
BTU/hour 44,000 60,000 89,000
GAS CONNECTION
VOLTS
AMPS
PLUG NEMA 5-15P (120V) or NEMA 6-15P (240V)
CORD LENGTH 8 feet (2.5 m)
WIDTH (A)
(drain tray CLOSED)
WIDTH (B)
(drain tray OPEN)
HEIGHT (C)
DEPTH (D)
SHIPPING DIMENSIONS
(crate)
SHIPPING WEIGHT
FREIGHT CLASS 85 85 85
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP SPA
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
SPEC
718-24-34/
03-2013
Page 2 of 2
Loading...