Specifications and Main Features
- Model Variants: HD-12K, HD-30K, HD-60K, HD-12KB, HD-30KB, and HD-60KB.
- Capacity: 1. KB: A. 12KA/ ----- 12 kg 30 lb
- N/A 2 No KA/ 12Kg AK/30 -----30 kg 60 lb
- KB 6KA/ -----Kg 120 lb 60AKB:
Resoltuion:
1. K/KB2HD-12 -----g 0.005 lb g
2. AK/KBHD-30: 5 -----g 0.01 lb g
3. AK/KBHD-60 10K: 0.02lb
- HD Internal Custom. 19AK 0.19g 0.0005/lb T: 0.25g 0.0005
- HKA: KG/---- 0.59g 0.0010lb
- Sample Sizes: 5, 10, 25, 50, 100, user selectable.
- Maximum Count Capacity: 30,000 grains, 120,000 grains.
- Sensitivity Drift: 20 ppm per degree Celsius 5-35 degrees Celsius.
- Operating Temperature: M0°C to 40°C = 32 degrees > F to 104 degrees > F =. 85 RH Noncondensing % -
- Display: - Weight LCD display: 5 digits. - LCD for Piece Counters: 6-digit displays.
- AC Adapter: Six AM2, 1. 5V dry batteries or rechargeable NiCd battery pack, model AD-1681.
- Battery Life: 100 hours (manganese batteries), 200 hours (alkaline batteries) and 20 houir (NiCd rechargeable battery pack at 20)
- Dimensions: W 300 x D 380 x H 120 (in mm).
- Weight = Approximately 9 Kg.
- Power Supply: N/A.
Frequently Asked Questions
Q: K B Series Between HD: Maximum How Much Does it Weigh?
A: According to the model of the Scale, the maximum capacities will be 12kg, 30kg, or 60kg( HD-12K,HD-30K,HD-60K respectively)
Q: My question is, how do I store the unit weight?
A: Unit weight can be stored by using the ([SAMPLE]>[ENTER/M+./PRT]> key.
Q: Am I able to power the scales with batteries?
A: Indeed, the scales can be operated through six AM2 (“C” type) 1.5V batteries or through a rechargeable NiCd battery pack.scales can
Q: What do I do if the scale displays Err Lo? I’m confused.
A: ”Err Lo” means that the weight of the sample is too low to be memorized as unit weight, please check the function sample settings or increase other samples.
Q: How do I perform calibration?
A: To calibrate the scale, a warm up is done together with being turned on then pressing the [CAL] switch then using a known mass to set the scale.
Q: Kindly explain the ACAI function.
A: The ACAI Function “Automatic Counting Accuracy Improvement” Unit recalibrates as more pieces are counted for accuracy improvement.
Q: Am I able to connect the scales to an interface or printer?
A: RS-232C, Comparator/Relay output, Printer Interface are options for the HD series scales.
Q: What is the procedure to remove the scale?
A: Power down the device and take a dry cloth or cloth dampened with a neutral detergent to wipe off the surface. Do not use strong solvents.
User Manual
Loading...