Counting Scales
HC
-
i
Series
HC
-
i
Simple Operation Mode
By setting only the keys necessary for your operation, you can avoid making any unwanted operational mistakes. This mode
is available for zero setting, tare weight cancel setting, and sample counting setting.
High Internal Resolution & Wide Counting Range
High internal resolution of 1/600,000 (HC-3Ki / 6Ki / 30Ki) or 1/750,000 (HC-15Ki) is enhanced for greater counting accuracy.
Easy Data Retrieval
It is easy for the user to instantly retrieve article data such as the ID number, unit weight, tare weight and comparator
upper/lower limits without any difficulties. It helps to improve the effectiveness and reliability of the operation. Especially
effective for multi product lines.
Large Stainless Steel Weighing Pan
Large articles can easily be placed on the weighing pan. The weighing pan is removable and easy to clean.
Interface Function
Optional Interface (RS-232C (HC-03i) and RS-232C + Relay Output (HC-04i)) allows the user to perform diverse applications with
Barcode Printer.
Barcode Label Printer AD-8125
Prints out a label detailing ID number, unit weight, weight and
quantity. You can design your own labels with the UFC function.
Simple and Easy Operation with
High Performance Counting Function!
With the HC-i series and its accessories, you can easily build an inexpensive inventory control system.
The HC-i series is cost effective and will improve reliability by eliminating errors and unnecessary
repetition during large volume counting jobs.
Unit Weight Entry Navigator
Simply follow the blinking lights to obtain the unit weight. The HC-i series is very user-friendly!
Select your preferred method for unit weight entry; sample size weighing , 10-key pad input or ID number data retrieval.
STEP 1
Press the SAMPLE key.
Place 10 sample pieces
on the weighing pan.
blink!
blink!
SAMPLE
STEP 2
Press the ENTER key.
blink!
blink!
ENTER
➟
AWA (Audible Weighing Assist) Beeping Function
The beeping function tells you that you have almost reached your target quantity. The unit begins to make
a beeping sound at shorter intervals, making your counting job faster and easier.
ACAI (Automatic Counting Accuracy Improvement)
ACAI automatically corrects errors caused by variation in unit weights. This function provides greater counting
accuracy.
Detachable Display Unit
It is possible to put the display unit on a table or wall for diverse counting
applications.
Comparator Function
Can compare either the count or weight of pieces when the comparator function is activated, “HI“, “OK” or “LO” is displayed.
(Standard cable : 60cm, Optional extension cable HC-08i: 2m)
SLA (Sealed Lead Acid) Rechargeable Battery
Optional SLA battery (6V, 4Ah) has an approximate 80-hour battery life when fully charged.
Accumulation Function
To t al piece calculation stored in memory. Works in automatic mode or manual mode.
ID Memory Function
Can memorize up to 99 unit weights with tare weight and comparator limits by ID numbers (ID 01 to ID 99).
UFC (Universal Flex Coms)
Can design your own printing format and easily print out the measurement data.
Auto Power–Off function
Battery save function for SLA (Sealed Lead Acid). Switches OFF automatically if zero is displayed continuously for 5 minutes.
Calibration Function
Simple and easy to calibrate with external standard mass by full digital calibration for accurate weighing.
Large LCD Display showing Detailed Information
Displays piece counting, weight, unit weight, ID number, comparison result by “HI”, “OK” or “LO” and AC or battery power supply.
COUNT (pcs) Display
The TOTAL annunciator comes ON when
the COUNT display is showing the TOTAL value.
The M+ annunciator comes ON when
counting data is being accumulated.
The SAMPLE TOO LIGHT annunciator comes
ON when the unit weight is too light.
WEIGHT Display
The STABLE annunciator comes ON when
the weighing data is stable.
The TARE ENTERED annunciator comes ON when
the TARE weight is subtracted.
The ZERO annunciator comes ON when
the scale is at ZERO.
UNIT WEIGHT Display
ID Number (2 digits) is displayed when storing or recalling unit weight data.
Comparator results, HI/OK/LO.
The annunciator comes ON when the battery is working.
The annunciator comes ON when the number of additions
to M+ is displayed.
The ACAI annunciator comes ON when the weight is within
the ACAI range. When meeting the ACAI addition range, it will blink.
HC
-
i
ON
OFF
ZERO
KEY-
BOARD
TARE
TARE
ID.
KEY-
BOARD
SAMPLE
The ON/OFF key turns
the power ON and OFF.
The ZERO key returns
the scale to ZERO.
The KEYBOARD TARE key
allows the user to enter a known
TARE weight from the 10-key pad.
The TARE key subtracts
the TARE weight.
The ID key is used when recalling
unit weight data from ID memory.
The KEYBOARD key is used
when a unit weight is to be entered
via the 10-key pad.
The SAMPLE key is used when
entering a sample size.
ENTER
PRINT
TOTAL
+
M
*
RESET
The ENTER key enters Unit Weight,
Sample Size, ID or other data into
the scale from the 10-key pad.
The PRINT key sends Count,
Weight or Unit Weight data.
The TOTAL key displays the accumulated
data on the count display and can also return
to the object currently on the scale.
The M+ key accumulates the count data.
The * key displays comparator limits,
works as M- key or toggles the
weighing units lb/kg.
The key sets or recalls a target
weight using the AWA function.
The RESET key clears the Unit Weight
data in use.
STORE
UNIT
WEIGHT
The STORE UNIT WEIGHT key
stores the unit weight on
display to ID memory.
.
c
The 0~9 & . keys send numbers to the display.
The C key clears any numbers on the display,
which were input using the 10-key pad.
Specifications
HC-3Ki
Capacity kg
Resolution kg
Capacity lb
Resolution lb
Sample Size
Min. Unit Weight*
Internal Resolution
Non-linearity
Repeatability
Span Drift
Operating Temp.
Display
Display Update
Max. Count Display
Interface
Power
Platform Size
Dimensions
Weight (approx.)
Calibration Weight
Standard Accessories
Min. unit weight varies according to the function setting (F-02-03)
*
3kg
0.0005kg
6lb
0.001lb
10 pieces normal –5, 25, 50, 100 or random number, user selectable
0.1g / 0.005g
1 / 600,000
±0.5g
0.5g
–10°C to 40°C / 14°F to 104°F, 85%RH or lower ( No condensation)
7 segment LCD, Character height: pcs 18.6mm, weight/unit weight 11.4mm
600,000
Battery Operating Time : Approx. 80-hour (without interface)
315(W) x 331(D)x 126(H)mm / 12.4(W) x 13.0(D)x 5.0(H) inches
3kg ±0.1g
HC-6Ki
6kg
0.001kg
15lb
0.002lb
0.2g / 0.01g
±1g
1g
0.002% / °C (5°C~35°C) typ.
Approximately 10 times per second
RS-232C (option)
AC adapter or SLA Battery (option)
300 x 210 mm / 11.8 x 8.3 inches
4.8kg / 10.6lb
6kg ±0.2g
Instruction manual, AC adapter
Specifications are subject to change for improvement without notice.
HC-15Ki
0.4g / 0.02g
1 / 750,000
15kg ±0.5g
15kg
0.002kg
30lb
0.005lb
±2g
2g
750,000
HC-30Ki
30kg
0.005kg
60lb
0.01lb
1g / 0.05g
1 / 600,000
±5g
5g
600,000
30kg ±1g
Options
HC-02i
HC-03i
HC-04i
HC-08i
Sealed Lead Acid Battery (6V, 4Ah)
RS-232C
RS-232C + Relay Output
Extension Cable (2m)
External Dimensions (mm/inch)
331/13. 0
315/12.4
280/11.0
Accessories
AD-8121 B
AD-8118 B
AD-8951
AD-812 5
221/8.7
Compact Printer
Journal Printer
Comparator Light
Barcode Label Printer
AD-8121B
Dot Matrix Compact Printer
210/8.3
126/5.0
AD-8951
Comparator Light
300/11.8
LIT:HC-i 05/06
Loading...