AcuRite 13131A3, 75065 Instruction manual
Instruction Manual
Atomic Alarm Clock
models 13131A3 / 13131W2 / 75065
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets................. 3
Clock Setup ........................... 4
Atomic Clock ......................... 5
Set the Time & Date ............... 5
Placement Guidelines ............. 6
Using the Alarm Clock............ 7
Troubleshooting ..................... 8
Care & Maintenance.............. 9
Specications......................... 9
FCC Information .................... 9
Customer Support .................10
Warranty..............................10
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Alarm clock
2. Instruction Manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
Archived Products
Register a Product
►
2
Features & Benets
FRONT
1. SNOOZE/LIGHT Button
2. Atomic Clock
Sets itself to the correct
time and automatically
updates for Daylight
Saving Time.
3. AM/PM Indicator
4. Time Zone Indicator
5. " ALARM ON"
Indicator Icon
6. Date
7. Day of the Week
8. Current Indoor Temperature
9. Menu Selection
10. Atomic Signal Strength
3
4
5
11
12
13
14
2
1
10
6 7 8
SIDE/BOTTOM
11. SET CLOCK Button
12. “▲” Button
For setup preferences.
13. “▼” Button
For setup preferences.
14. ALARM ON/OFF Button
15. °C/°F Button
Press to select ºC or ºF
temperature units.
16. RESET Button
Full reset to factory defaults.
17. Battery Compartment Cover
15
16
9
17
3
SETUP
Clock Setup
Install or Replace Batteries
1. Remove the battery compartment cover.
2. Insert 3 x AA alkaline batteries into the battery compartment, as shown.
Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.
Install or
Replace
Batteries
3 AA alkaline
batteries
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
4
Loading...