Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit
2. Outdoor sensor
3. Instruction Manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
Features & Benets
1
2
3
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
Register a Product
►
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
4
2. Wireless Signal Indicator
Flashes when data is being sent to the
display unit.
3. Battery Compartment
4. Battery Compartment Cover
2
Features & Benets
DISPLAY UNIT
132
12
1. 12 to 24 Hour
Weather Forecast
Self-Calibrating Forecasting
pulls data from the outdoor
sensor to generate your
personal forecast.
2. Learning Mode Icon
Disappears after weather
forecast self-calibration is
complete.
3. Sensor Low Battery Indicator
4. Current Outdoor Temperature
5. Outdoor Sensor Signal Strength
6. Moon Phase
7. Pressure History Graph
Tracks and displays the barometric
pressure history.
8. Current Barometric Pressure
4
5
6
BACK OF DISPLAY UNIT
1. "▲" Button
For setup preferences and
viewing records.
2. "▼" Button
For setup preferences and
viewing records.
3. SET Button
For setup preferences.
4. Fold-out Tabletop Stand
5. Battery Compartment
6. Intelli-Time Battery
Compartment
7. Integrated Hang Hole
For easy placement.
8. Battery Compartment Cover
7
9. Date
10. Intelli-Time Clock
Automatically updates for Daylight
Saving Time.
11. Current Indoor Temperature
12. Display Low Battery Indicator
12 34567
8
8
11
10
9
3
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
3. Replace the battery cover.
Display Unit
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
3. Replace the battery cover.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
4
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.