Instruction Manual
Weather Center
model 00615
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: 3-in-1 ....... 3
Features: Display Unit ............ 4
Setup .................................... 6
3-in-1 Sensor Setup ................ 6
Display Unit Setup ................. 7
Atomic Clock ......................... 8
Set Time, Date & Units ............ 8
Sensor & Display Placement ... 9
3-in-1 Sensor Installation ........10
Using the Weather Center .....11
Weather Ticker .....................12
Troubleshooting ....................14
Care & Maintenance ............. 16
Specications ........................16
FCC Information ...................16
Customer Support ................. 17
Warranty..............................17
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit
2. Tabletop stand
2. 3-in-1 sensor
3. Sensor mounting bracket
4. Mounting hardware
5. Instruction Manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
Register a Product
►
2
Features & Benets
1
4
2
5
3-in-1 SENSOR
1. Temperature & Humidity Sensors
(internal)
2. Release Lever for Battery Access
3. Mounting Point
4. Wind Speed Anemometer
6
3
5. Mounting Hardware
Includes anchors and screws.
6. Mounting Bracket
7. A-B-C Switch (not shown)
ID code that must match display’s
A-B-C switch to ensure units
synchronize.
3
DISPLAY UNIT
1. History Chart Icon
Indicates data is currently displayed on
the History Chart (6).
2. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data
from the outdoor sensor to generate your
personal forecast.
3. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
4. Current Indoor Temperature
5. Current Indoor Humidity
6. Multi-Variable History Chart
Displays the past 12 hours of data for
pressure, temperature or wind speed.
7. Weather Ticker™
8. Deactivate Weather Ticker
Message
9. Weather Ticker Manual Cycle
Press to advance through messages.
10. Activate Weather Ticker Message
11. Seasonal
Displays heat index, dew point or
wind chill, depending on the current
outdoor temperature.
12. Outdoor Sensor Signal Strength
13. Current Outdoor Humidity
Arrow icon indicates direction
humidity is trending.
14. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
15. Current Wind Speed
16. History Chart Icon
Indicates data is currently displayed on
the History Chart (6).
17. Selected Time Zone
18. Average Wind Speed
Based on all wind speed readings
from the past 2 minutes.
19. Peak Wind Speed
Highest speed from past 60 minutes
20. Atomic Clock Signal Strength
21. Atomic Clock
Maintains time with split-second
accuracy and automatically updates
for daylight saving time.
22. Barometric Pressure
Arrow icon indicates the direction
the pressure is trending.
23. Display Unit Low Battery Indicator
24. Date
BACK OF DISPLAY UNIT
25. UP, SET & DOWN Buttons
For setup preferences.
26. Reset Button
Full reset to factory defaults.
27. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
28. Integrated Hang Hole
For easy wall mounting
29. MAX/MIN Button
Press to view high or low records for
temperature and humidity.
30. SCALE Button
Changes data units to either
U.S. units or imperial units.
31. HISTORY Button
Press to toggle between pressure,
temperature and wind speed data
on the History Chart (6).
32. Battery Compartment Cover
(not shown)
5
SETUP
3-IN-1 Sensor Setup
Set the A-B-C Switch
1
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display unit in order for the
units to synchronize.
Install or Replace Batteries
2
AcuRite recommends high quality
alkaline or lithium batteries for
the best product performance.
Heavy duty or rechargeable
batteries are not recommended.
The 3-in-1 sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries to
function improperly. Use lithium
batteries in the 3-in-1 sensor for
temperatures below -4ºF / -20ºC.
1. Press the release lever and
pull off the lower housing of
the sensor.
2. Remove the battery
compartment cover.
3. Insert 4 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
4. Replace the battery cover and
lower housing of the sensor.
A B C
A-B-C Switch
1
set to match
display unit
Install Batteries
2
4 AA batteries
6