AcuRite 13041RM User manual

Intelli-Time Alarm Clock

ACU►RTE

Instruction Manual

model 13041RM

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor..... 2

Features & Benets: Clock ...... 3

Setup .................................... 4

Sensor Setup ......................... 4

Clock Setup ........................... 5

Intelli-Time® Clock .................. 6

Set the Time, Date & Units ...... 6

Placement Guidelines ............. 7

Using the Alarm Clock............ 8

Backlight Settings ................... 8

USB Charging........................ 9

Troubleshooting ....................10

Care & Maintenance............. 11

Replace Intelli-Time

Specications........................12

FCC Information ...................12

Customer Support .................13

Warranty..............................13

®

Battery ..11

Questions? Contact Customer Support at

[phone] or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.

Package Contents

1. Alarm Clock

2. Outdoor Sensor

3. Power Adapter

4. Instruction Manual

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

Features & Benets

1

2

L II

3

4

•

5

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

Archived Products

Register a Product

►

OUTDOOR SENSOR

1. Integrated Hanger

for easy placement.

2. Wireless Signal Indicator

Flashes when data is being
sent to the clock.

3. Battery Compartment

4. A-B-C Switch

ID code that must match clock’s

A-B-C switch to ensure units
synchronize.

5. Battery Compartment Cover

2

Features & Benets

3 2 1

4 5

6 7

8

FRONT OF CLOCK

1. SNOOZE Button

2. Time

3. Moon Phase

4. Outdoor Sensor Signal Strength

5. Current Outdoor Temperature

6. Day of the Week

7. Date

8. Current Indoor Temperature

9. Humidity Level Icon

Indicates a high, low or ideal
humidity comfort level.

10

9

11

12

10. Current Indoor Humidity

11. Alarm ON/OFF Indicator

(11°S'11)

lf:

12. Icon

auto

Indicates display backlight
“AUTO DIM” mode activated.

4 -

18 19

13
14

15

16

2120 22

17

3

SIDE OF CLOCK

13. “ ” Button

For setup and backlight
brightness preferences.

14. SET Button

For setup preferences

15. “ ” Button

For setup and backlight
brightness preferences.

16. Alarm ON/OFF Switch

17. Battery Compartment Cover

BACK OF CLOCK

18. USB Charger

For compatible Smartphones

19. Plug in for Power Adapter

20. A-B-C Switch

ID code that must match the

sensor's A-B-C switch to ensure
units synchronize.

21. Battery Compartment

22. Intelli-Time® Battery
Compartment

SETUP

Sensor Setup

Set the A-B-C Switch

1

The A-B-C switch is located inside

•

the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the clock in order for the units to

synchronize.

Install or Replace Batteries

2

AcuRite recommends high quality

•

alkaline or lithium batteries for
the best product performance.
Heavy duty or rechargeable
batteries are not recommended.

The sensor requires lithium
batteries in low temperature

Install Batteries

2

2 AA batteries

conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.

1. Slide off the battery
compartment cover. Take

note of the A-B-C switch

setting inside the battery
compartment for clock setup.

2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

A-B-C Switch

1

set to match

clock

•

A B C

s~~f~~~s

ALKALINE

sAnER1Es B; !ii rew,

¢(•Q#•Q9• <70°c> 158°F I

■

9'1~•

■■■

4

c:-----:--::------,

1

(70°c> 1se°F I

Clock Setup

Set the A-B-C Switch

1

Locate the A-B-C switch inside

•

the battery compartment. Set
the A-B-C switch to A, B or C.
You must select the same letter
choices for both the clock and

the sensor in order for the units
to synchronize.

2

Plug in Power Adapter

For the best performance, plug

•

in the power adapter as the main
power source for this product.

A-B-C Switch

1

set to match
sensor

A B C

Plug in Power

2

Adapter

(on back of unit)

•

Install or Replace Backup

3

Batteries

•

1. Remove the battery

compartment cover.

2. Insert 2 x AAA alkaline
batteries into the battery
compartment, as shown.
Follow the polarity
(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

3

•

Install or
Replace Backup
Batteries

2 AAA alkaline
batteries

IMPORTANT: Batteries are a backup power source to preserve records in the event of a

power outage. Power adapter recommended as the primary power source to enjoy the full
functionality of the product.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

5

Intelli-Time® Clock

Intelli-Time clock and calendar are pre-programmed to the correct time and
date, and update automatically for Daylight Saving Time. All you need to do is
select your time zone during clock setup.

Set the Time, Date & Units

Press and HOLD the “SET” button, located on the side of the clock until
"SELECT TIME ZONE" appears on the display to enter SET MODE. Once in
SET MODE the preference you are currently setting will blink on the clock.

To adjust the currently selected (ashing) item, press and release the “ ” or
“ ” buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:

TIME ZONE (PST MST CST EST AST HAT AKT NDT)
AUTO DST ON/OFF*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE SCALE (ºF or ºC)

You will automatically exit SET MODE if no buttons are pressed for 5 seconds.
Enter SET MODE at any time by pressing and holding the “SET” button until
"SELECT TIME ZONE" appears on the display.

*If you live in an area that observes daylight saving time, DST should be set to
ON.

6

Placement for Maximum Accuracy

TV

3

(100 meters)

(330 feet maximum)

(.91 m)

AT

LEAST

APART

AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the clock and outdoor sensor are critical to the accuracy

and performance of this product.

Alarm Clock Placement

Place alarm clock in a dry area free of dirt and dust. To help ensure
an accurate indoor temperature measurement, be sure to place the
clock away from heat sources or vents.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor use,

.

however, to extend its life place the sensor in an area protected from

1111

direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or by
using string (not included) to hang it from a suitable location, like a
well covered tree branch. The best location is 4 to 8 feet above the
ground with permanent shade and plenty of fresh air to circulate

around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct

sunlight and away from any heat sources or vents.

• Clock and outdoor sensor must be within 330 ft (100 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.).

' I /

--o ...

- -

/ I \'

-

~

Ill ))})

Setup is Complete

The sensor will now synchronize with the alarm clock. It may take a few
minutes for synchronization to complete.

7

OPERATION

Using the Alarm Clock

Set the Alarm Time

To set alarm time, press and RELEASE the “SET” button to enter ALARM SET
MODE.

To adjust the currently selected (ashing) item, press and release the “ ” or
“ ” buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:

ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE

You will automatically exit ALARM SET MODE if no buttons are pressed for
5 seconds. Enter ALARM SET MODE at any time by pressing and RELEASING
the “SET” button.

Alarm Clock ON or OFF

To turn alarm on: Slide the ON/OFF switch on the side of the clock to ON. The

indicator appears on the screen.

ON

To turn alarm off: Slide the ON/OFF switch on the side of the clock to OFF.

'(:i

The

indicator appears on the screen.

OFF

Alarm Clock SNOOZE

The alarm clock will sound, increasing in volume over a 2 minute period. When
the alarm is sounding, press the "SNOOZE" button to activate the SNOOZE
function for 10 minutes. The SNOOZE function can be activated up to 10 times.

Backlight Settings

This clock’s color display features 6 different lighting settings: 100% (High),
70%, 50% (Medium), 30%, 10% and 5% (Low) brightness.

When clock is powered with the power adapter, backlight remains on at 100%
brightness by default. Press the "SNOOZE" button at any time to momentarily
light the display at 100% brightness. After 5 seconds, the clock will return to
the user-selected brightness setting.

Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the “SNOOZE” button.

Manually adjust the backlight brightness by pressing and releasing the “ ”

or " " buttons when not in SET MODE or ALARM SET MODE. Press the
“ ” button a sixth time to enter “AUTO DIM” mode. will appear to the
right of the time.

a'(/:

auto

8

AUTO DIM MODE: Automatically adjusts display brightness based on time of day.

LOW

7:00 a.m. - 9:00 p.m. = 100% brightness

9:01 p.m. - 6:59 a.m.= 5% brightness

Humidity Level Icon

The Humidity Level Icon easily conveys a low, high or ideal indoor humidity
level for your home and health:

LOW Humidity Level

Humidity is

Q G D

low relative to

temperature.
Makes for a
DRY environment.

OK Humidity Level

Humidity is
OK relative to

temperature.
Makes for an
IDEAL environment.

HIGH Humidity Level

HIGH

Humidity is
high relative to

temperature.
Makes for a HUMID
environment.

Learn more at http://www.acurite.com/humidity-health

Moon Phase

Track the phases of the moon, conveyed through simple lunar phase icons:

NEW WAXING 1ST FULL

CRESCENT QUARTER

3RD

QUARTER

USB Charging

Charge your mobile device by plugging your device’s USB power cord
(not included) into the USB charging port on the back of the clock.

USB charging is only available during power adapter

use; USB charging is not active when operating

on battery power only.

Note: Follow the manufacturer’s instructions for your
mobile device(s) to determine compatibility with the

USB charging feature on this product. Some devices may not
support USB charging or may require a higher power rating

than this product provides. Observe the charging status on
your device. Ensure your device is working properly before

attempting to charge.

9

WANING

CRESCENT

Troubleshooting

No outdoor sensor

reception

no bars

T111I

Clock is too dark, hard

to read or doesn’t

work

Inaccurate

temperature

If the wireless signal indicator shows no bars:

• Relocate the clock and/or the outdoor sensor. The units

must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet

(.9 m) away from electronics that may interfere with
the wireless communication (such as TVs, microwaves,
computers, etc).

• Use standard alkaline batteries (or lithium batteries
in sensor when temperature is below -4ºF/-20ºC). Do
not use heavy duty or rechargeable batteries. NOTE:
It may take up to 20 minutes for clock and sensor to
synchronize after batteries are replaced.

• Verify power adapter is plugged in.

• Check that the batteries are installed correctly. Batteries
may need to be replaced.

...

• Increase brightness using “ ”/ “ ” buttons, located
on the back of the clock.

• The optimum viewing angle for this product is from
slightly above it.

• Make sure both the clock and sensor are placed out of
direct sunlight and away from any heat sources or vents

(see page 7).

...

Flashing of the outdoor temperature is generally an
indication of wireless interference.

Outdoor

temperature

is ashing or

showing dashes

1. Bring both the sensor and clock indoors, side by side

and remove batteries from each.

2. Make sure the A-B-C switch on both units match.

3. Reinstall batteries in outdoor sensor.

4. Reinstall batteries in clock.

5. Let the units sit within a couple feet of each other for

about 20 minutes to gain a strong connection.

If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
[phone] for assistance.

10

Care & Maintenance

Clock Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Replace Intelli-Time Clock Battery

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores
the time and date settings. The battery has a shelf life of several years. Time
and date will need to be entered
after replacing Intelli-Time battery.
To replace the Intelli-Time battery:

1. Locate the coin cell battery

compartment door in the

battery compartment of the
alarm clock. Unscrew and

remove the compartment cover.

2. Insert 1 x CR2032 coin

cell battery into the battery
compartment, as shown. Install
battery with “+” positive
terminal facing OUT.

2

Insert
CR2032
Battery

CR2032

3V

3. Screw in the battery cover.

WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED, ITffi

COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS.

SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED.

Remove

1

Battery Cover

11

~

POISON

Specications

TEMPERATURE RANGE

Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
Indoor: 32ºF to 122ºF; 0ºC to 50ºC

HUMIDITY RANGE
WIRELESS RANGE
OPERATING FREQUENCY

POWER

Indoor: 1% to 99% RH

330 ft / 100 m depending on home construction materials
433 MHz

Clock: 5v power adapter

2 x AAA alkaline batteries (for backup only)

Sensor: 2 x AA alkaline or lithium batteries
USB: 1.5A output

DATA REPORTING

Outdoor data: 16 second updates
Indoor data: 60 second updates

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.

-

12

Customer Support

AcuRite customer support is committed to providing you with best-in­class service. For assistance, please have the model number of this
product available and contact us in any of the following ways:

(()

[phone] [e-mail]

24/7 support at www.AcuRite.com

► Installation Videos ► Register your Product
► Instruction Manuals ► Support User Forum
► Replacement Parts ► Submit Feedback & Ideas

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

Archived Products

Register a Product

►

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to
be of good material and workmanship, and to
be free of defects when properly installed and

operated for a period of one year from the date
of purchase.

We recommend that you visit us at
www.AcuRite.com for the fastest way to register

your product. However, product registration
does not eliminate the need to retain your
original proof of purchase in order to obtain
warranty benets.

Chaney Instrument Co. warrants that all products it manufactures
to be of good material and workmanship, and to be free of
defects when properly installed and operated for a period of
one year from the date of purchase. Remedy for breach of this
warranty is limited to repair or replacement of the defective
item(s). Any product which, under normal use and service, is
proven to breach the warranty contained herein within ONE
YEAR from date of sale will, upon examination by Chaney,
and at its sole option, be repaired or replaced by Chaney.
Transportation costs and charges for returned goods shall
be paid for by the purchaser. Chaney hereby disclaims all
responsibility for such transportation costs and charges. This

warranty will not be breached, and Chaney will give no credit
for products it manufactures which have received normal wear
and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty
of tness for a particular purpose. Chaney expressly disclaims
all liability for special, consequential or incidental damages,
whether arising in tort or by contract from any breach of this
warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. Chaney further disclaims all
liability from personal injury relating to its products to the extent
permitted by law. By acceptance of any of Chaney’s products,
the purchaser assumes all liability for the consequences arising
from their use or misuse. No person, rm or corporation is
authorized to assume for Chaney any other liability in connection
with the sale of its products. Furthermore, no person, rm or

corporation is authorized to modify or waive the terms of this

paragraph, and the preceding paragraph, unless done in writing
and signed by a duly authorized agent of Chaney. This warranty
gives you specic legal rights, and you may also have other

rights which vary from state to state.

For in-warranty claims: Chaney Instrument Co.

965 Wells St., Lake Geneva, WI 53147

13

14

15

ACU

►

RITE®

Weather Temperature Weather Kitchen

Stations & Humidity Alert Radio Thermometers

It’s more than accurate, it’s

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

& Timers

ACU

Plan your day with condence

►

.

™

RITE.

Clocks

www.AcuRite.com

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark

of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and

Printed in China

13041 INST 062215 technology. Visit www.AcuRite.com/patents for details.

copyrights are the property of their respective owners. AcuRite uses patented