AcuRite 13020CCDI User Manual

180º

Instruction Manual

Projection Alarm Clock

model 13020CCDI

item 397130

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor ..... 2

Features & Benets: Alarm ...... 3

Setup .................................... 5

Sensor Setup ......................... 5

Alarm Setup .......................... 6

Setup Preferences .................. 7

Intelli-Time Clock .................... 7

Placement Guidelines ............. 8

Using the Alarm Clock ............ 9

USB Charging ........................ 9

Using the Projector ................10

Backlight Settings .................. 10

Troubleshooting ....................11

Care & Maintenance .............12

Specications ........................13

FCC Information ...................13

Customer Support ................. 14

Warranty..............................14

Questions? Contact Customer Support at

[phone] or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.

Package Contents

1. Alarm clock

2. Outdoor sensor

3. Power adapter

4. Instruction Manual

PRODUCT MUST BE REGISTERED

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

TO RECEIVE WARRANTY SERVICE

Register a Product

►

Features & Benets

1

2

3

4

OUTDOOR SENSOR

1. Integrated Hanger
for easy placement.

5

2. Wireless Signal Indicator
Flashes when data is being

sent to the display unit.

3. Battery Compartment

4. A-B-C Switch

ID code that must match display’s
A-B-C switch to ensure units

synchronize.

5. Battery Compartment Cover

2

180º

Features & Benets

6 7

8 9

11 12

FRONT OF ALARM

6. Projector Power On/Off

7. Flip Projection 180˚

for versatile viewing angles.

8. Projection Information
Toggle between time, indoor

temperature or outdoor temperature

9. Projection Color

Toggle between red or amber.

10. UP, SET & DOWN Buttons

for setup preferences.

11. Alarm Setup

12. Alarm On/Off Button

13. Snooze Button

BACK OF ALARM

14. A-B-C Switch
ID code that must match sensor’s

A-B-C switch to ensure units
synchronize.

10

21

1514 17

DC 5 v

1613

CHARGE

USB DEVICE

22 23

15. ˚C/˚F Switch

Select degrees Celsius or degrees
Fahrenheit temperature units.

16. Zone Button

Set time zone preference.

17. RESET Button
Full reset to factory defaults.

18. Projector Focus
Adjust the size and focus of the

projected image.

19. DC 5v Power Input

20. USB Charging
for compatible smartphones.

21. + Brightness Button
Increase display brightness.

22. — Brightness Button
Decrease display brightness.

23. Battery Compartment

24. Battery Compartment Cover

(not shown)

1819 20

3

Features & Benets

1

2

3

4

6

7

5

8

1. Current Indoor Temperature
Arrow icon indicates direction

temperature is trending.

2. Current Outdoor Temperature

Arrow icon indicates direction

temperature is trending.

3. Intelli-Time® Clock

Sets itself to the correct time and
automatically updates for Daylight
Saving Time.

4. Intelli-Time® Date
Sets itself to the correct date.

5. Moon Phase

6. Alarm On/Off

7. Alarm Set Time

8. Alarm Days Active

Indicates daily alarm or weekday-only
alarm setup.

4

SETUP

Sensor Setup

Set the A-B-C Switch

1

The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display unit in order for the

units to synchronize.

Install or Replace Batteries

2

AcuRite recommends high quality
alkaline or lithium batteries for
the best product performance.
Heavy duty or rechargeable
batteries are not recommended.

The sensor requires lithium
batteries in low temperature

Install Batteries

2

2 AA batteries

conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.

1. Slide off the battery
compartment cover. Take
note of the A-B-C switch
setting inside the battery

compartment for part 2.

2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

A-B-C Switch

1

set to match

display unit

A B C

5