Acu-Rite 13026, 13020 User Manual

180º

Instruction Manual

Projection Alarm Clock

model 13020 / 13026

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor ..... 2

Features & Benets: Alarm ...... 3

Setup .................................... 5

Sensor Setup ......................... 5

Alarm Setup .......................... 6

Setup Preferences .................. 7

Intelli-Time Clock .................... 7

Placement Guidelines ............. 8

Using the Alarm Clock ............ 9

USB Charging ........................ 9

Using the Projector ................10

Backlight Settings .................. 10

Troubleshooting ....................11

Care & Maintenance .............12

Specications ........................13

FCC Information ...................13

Customer Support ................. 14

Warranty..............................14

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.

Package Contents

1. Alarm clock

2. Outdoor sensor

3. Power adapter

4. Instruction Manual

PRODUCT MUST BE REGISTERED

IMPORTANT

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

TO RECEIVE WARRANTY SERVICE

►

Features & Benets

OUTDOOR SENSOR

1. Integrated Hanger for easy placement.

2. Wireless Signal Indicator Flashes when data is being

sent to the display unit.

3. Battery Compartment

4. A-B-C Switch

ID code that must match display’s A-B-C switch to ensure units

synchronize.

5. Battery Compartment Cover

180º

Features & Benets

6 7

8 9

11 12

FRONT OF ALARM

6. Projector Power On/Off

7. Flip Projection 180˚

for versatile viewing angles.

8. Projection Information Toggle between time, indoor

temperature or outdoor temperature

9. Projection Color

Toggle between red or amber.

10. UP, SET & DOWN Buttons

for setup preferences.

11. Alarm Setup

12. Alarm On/Off Button

13. Snooze Button

BACK OF ALARM

14. A-B-C Switch ID code that must match sensor’s

A-B-C switch to ensure units synchronize.

1514 17

DC 5 v

1613

CHARGE

USB DEVICE

22 23

15. ˚C/˚F Switch

Select degrees Celsius or degrees Fahrenheit temperature units.

16. Zone Button

Set time zone preference.

17. RESET Button Full reset to factory defaults.

18. Projector Focus Adjust the size and focus of the

projected image.

19. DC 5v Power Input

20. USB Charging for compatible smartphones.

21. + Brightness Button Increase display brightness.

22. — Brightness Button Decrease display brightness.

23. Battery Compartment

24. Battery Compartment Cover

(not shown)

1819 20

Features & Benets

1. Current Indoor Temperature

Arrow icon indicates direction

temperature is trending.

2. Current Outdoor Temperature

Arrow icon indicates direction

temperature is trending.

3. Intelli-Time® Clock

Pre-programmed to the correct

time and automatically updates for Daylight Saving Time.

4. Intelli-Time® Date

Pre-programmed to the correct date.

5. Moon Phase

6. Alarm On/Off

7. Alarm Set Time

8. Alarm Days Active

Indicates daily alarm or weekday-only alarm setup.

SETUP

Sensor Setup

Set the A-B-C Switch

The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to

synchronize.

Install or Replace Batteries

AcuRite recommends high quality alkaline or lithium batteries for the best product performance. Heavy duty or rechargeable batteries are

not recommended.

The sensor requires lithium batteries in low temperature

Install Batteries

2 AA batteries

conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the sensor for temperatures below

-4ºF / -20ºC.

1. Slide off the battery compartment cover. Take note of the A-B-C switch setting inside the battery compartment for display unit setup.

2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery

compartment.

3. Replace the battery cover.

A-B-C Switch

set to match

display unit

A B C

+ 11 hidden pages