Please DO NOT return product to the retail store.
For technical assistance and product return information, please call
Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 P.M. (CST)
www.chaneyinstrument.com
LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and
workmanship and to be free of defects if properly installed and operated for a period of one year from date of
purchase. REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT
OF DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to breach the warranty
contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option,
be repaired or replaced by Chaney. In all cases, transporation costs and charges for returned goods shall
be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and
charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures
which shall have received normal wear and tear, been damaged, tampered, abused, improperly installed,
damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL
DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY BREACH OF HTIS WARRANT. SOME
STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS ALL
LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY
ACCEPTANCE OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY
FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION
IS AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS
PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE
THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND
SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
Mon-Fri 8:00 a.m. to 4:30 p.m. CST
Chaney Customer Care
877-221-1252
www.chaneyinstrument.com
INST - 13001A1/13002A1 120610
Alarm Clock
with Intelli-Time
#13001A1 13002A1
Instruction Manual
Package Contents:
(1) Alarm Clock
(1) Instruction Manual
Thank You for purchasing this ACURITE
technology, which instantly sets the clock once the clock is plugged in. Please read this
manual in its entirety to fully enjoy the benefits and features of this product. Please keep
this manual for future reference.
NOTE: A clear film is applied to the display at the factory that must be removed prior to
using this product. Locate the clear tab and simply peel to remove.
1 • OVERVIEW OF FEATURES
®
product. This alarm clock features Intelli-Time
®
®
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmfuly interference ina residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the equipment.
Patent Pending
-4-
PM indicator
Alarm ON/OFF
Adjust DOWN
Set ALARM
Snooze Bar
TOP OF ALARM CLOCK
TOP OF ALARM CLOCK
-1-
Alarm ON Indicator
TIME ZONE
Selection Switch
Adjust UP
TIME Set
About Intelli-Time
Your new alarm clock is equipped with Intelli-Time® technology which is pre-programmed
with the correct time and date. Intelli-Time
installed. The Intelli-Time
This battery is located in the Intelli-Time
the clock and is pre-installed at the factory. We suggest replacement of the backup battery
every 5 years. We recommend the replacement of backup battery in 1-2 years if the unit is not
powered on for a long period of time. Do not replace the memory battery unless the clock is
plugged in and the display is operating with the correct time.
®
®
®
feature requires an internal memory battery to operate correctly.
instructs the clock to set itself once batteries are
®
memory battery compartment on the bottom of
2 • SETUP
Plug the AC power cord into a 110v AC power outlet.
CAUTION: To prevent electric shock, do not use this plug with an extension cord, receptacle, or
any other outlet unless the blades can be fully inserted to prevent blade exposure.
WARNING: To prevent fire or shock hazard, do not expose the alarm clock to rain or moisture.
Basic Clock Setup
After plugging in the clock, the clock will be set to the proper time for the default time zone
(EST). Next, you will need to select your time zone for the clock to display your correct time.
The time zone selection switch is located on the bottom of the alarm clock.
Another preference which may need to be set depending on your location is Daylight Saving
Time (DST). Certain areas do not observe DST, and you may need to disable the DST setting
(OFF). The DST selection switch is located on the bottom of the alarm clock.
Optional Custom Time Setting
If you wish to set the clock slightly ahead or slightly behind, or if the Intelli-Time® internal
memory battery is allowed to go dead, you may set the time and date by simply following the
custom setup procedure below:
3 • OPERATION
Alarm Clock Setting
1. To set the alarm time, press AND HOLD the “ALARM” button for 3 seconds,
then release. The HOUR will blink.
2. Press the “-” or “+” buttons to adjust the HOUR, note the PM indicator.
3. Press and release the “ALARM” button to confirm hour selection and move on to
setting the MINUTES.
4. Press the “-” or “+” buttons to adjust the MINUTES.
5. Press and release the “ALARM” button to confirm and exit alarm time set mode.
Note: Auto return to normal time after 6 seconds of last button press.
Alarm Clock ON or OFF
To turn the alarm function on, slide the ALARM switch to the “ON” position. A small
alarm clock indicator will appear on the display when the alarm function is switched
to the “ON” position. To turn OFF the alarm function completely, slide the ALARM
switch to the “OFF” position. This will prevent the alarm from sounding at all until
the switch is slid back into the “ON” position.
Alarm Clock SNOOZE function
Press the “SNOOZE” button to activate the 8 minutes snooze alarm.
1. Press AND HOLD the “TIME SET” button for 3 seconds, then release. The HOUR will blink.
2. Press the “-” or “+” buttons to adjust the HOUR. Note the PM indicator.
3. Press and release the “TIME SET” button again to confirm your selection and move
on to setting the MINUTES.
4. Press the “-” or “+” buttons to adjust the MINUTES.
5. Press and release the “TIME SET” button again to confirm your time setting and
move on to setting the calendar.
6. Set the Month, Date, and Year in the same manner the time was set.
7. Press and release the “TIME SET” button to exit custom time setting mode.
Note: Auto return to normal time after 6 seconds of last button press.
Changing the Backup Battery
Do not change the backup batteries unless the unit is plugged in and powered. This will
prevent the clock from being without power, and the internal calendar memory will function
properly. When changing the backup batteries, remove the battery compartment cover on
the bottom of the unit by loosening the screw on cover. Replace the 1 “CR2032” 3V Lithium
battery with a fresh one and replace the cover. NOTE: the backup battery does not power
the display in the event of a power outage. The backup battery system provides power
to the internal clock and calendar for the IntelliTime
plugged in.
-2-
®
clock function when the unit is not
-3-