AcuRite 06096 Instruction Manual

Display for 5-in-1 Weather Sensor

Package Contents

1. Display with Tabletop Stand

2. Power Adapter

3. Instruction Manual

Instruction Manual

model 06096

This product requires an AcuRite 5-in-1 Weather Sensor

(sold separately) to be operational.

PRODUCT MUST BE REGISTERED

IMPORTANT

PRODUCT REGISTRATION

Register online to receive 1 year warranty protection

TO RECEIVE WARRANTY SERVICE

www.AcuRite.com

Questions? Contact Customer Support at

www.AcuRite.com/support or email [e-mail]

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Features & Benefits

Display

28

27
26

25

24

23

22

21

20

19

18

17

16

~2~1

11 11 11 11 11 II I lnHg

trend.._

3 3

%' l.l ,.

1

2

3

4

5

6

7

8

9

10

11

12
13

14

15

5-in-1 Sensor Signal Strength

1.

2. Current Outdoor Humidity

Arrow icon indicates direction
humidity is trending.

3. High/Low Humidity Records

Highest and lowest outdoor humidity
recorded since midnight.

4. Average Wind Speed

Average wind speed over the past
2 minutes.

5. Peak Wind Speed

Highest speed from the last 60 minutes.

6. Icon

Indicates an alarm has been activated.

7.

Rainfall History

Displays historical rainfall totals
(see page 9).

8. Current Indoor Temperature

Arrow icon indicates direction
temperature is trending.

9. Humidity Level Indicator

Indicates a high, low, or ideal humidity
comfort level.

10. Current Indoor Humidity

Arrow icon indicates direction humidity
is trending.

11. Date

12. Clock

13.

14.

15.

16.

Button

set

For setup preferences.

Button

v

For momentary backlight and dimmer
settings.

A

Button

rain

For setup preferences and to cycle
through rainfall history.

Button

For setup preferences and to view
all-time records.

17.

18.

Button

For alarm setup preferences.

Icon

v

Indicates display is in auto-dimming
brightness mode (see page 6).

19. Moon Phase

20. Barometric Pressure

Arrow icon indicates direction pressure
is trending.

21. 12 to 24 Hour Weather Forecast

Self-Calibrating Forecasting pulls data
from your 5-in-1 sensor to generate
your personal forecast.

22. Month/Week/Today Rainfall

23. Current Wind Speed

24. Current Wind Direction

25. Seasonal Display

Heat Index calculation displays when
temperature is 80°F (27°C) or higher.
Dew Point calculation displays when
temperature is 79°F (26°C) or below.
Wind chill calculation displays when
temperature is 40°F (4°C) or lower.

26. High/Low Temperature Records

Highest and lowest outdoor temperature
recorded since midnight.

27. Previous 2 Wind Directions

28. Current Outdoor Temperature

Arrow icon indicates direction
temperature is trending.

2

3

SETUP

Back of Display

1

2

6

Display Setup

1

Set the A-B-C Switch

Locate the A-B-C switch inside

•

the battery compartment. Set
the A-B-C switch to A, B or C.
You must select the same letter
choices for both the display and
the sensor in order for the units to
synchronize.

2

Install or Replace Backup
Batteries (optional)

•

1. Remove the battery
compartment cover.

A-B-C Switch

1

Set to match

•

sensor

A B C

2. Insert 3 x AAA alkaline
batteries into the battery
compartment, as shown. Follow
the polarity (+/–) diagram in
the battery compartment.

3. Replace the battery cover.

3

Plug in Power Adapter

For the best performance, plug

•

in the power adapter as the main
power source for this product.

Install Backup

2

Batteries

•

3 AAA Batteries
(optional)

5 4 3

BACK OF DISPLAY

1. Integrated Hang Hole

For easy wall mounting.

2. Backup Battery Compartment

3. Plug-in for Power Adapter

4. A-B-C Switch

ID code that must match 5-in-1
sensorʼs A-B-C switch to ensure
units synchronize.

Plug in

5. RESET BUTTON

Press and release to clear data.
Press and HOLD for full reset to
factory defaults.

6. Power Adapter

7. Battery Compartment Cover

(not shown)

4 5

3

•

~

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries

in flre, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT

recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Power
Adapter

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that will not

0

r r

ii

r r

ii

e

IMPORTANT: Batteries are
a backup power source to
preserve records in the event of
a power outage. Power adapter

is recommended as the primary
power source to enjoy the full
functionality of this product.

Set the Time, Date & Units

The display will automatically enter SET MODE after the unit has powered on.
Once in set mode, the preference you are currently setting will blink on the
display.

“ or

To adjust the currently selected (flashing} item, press and release the "~

¥

“ “ buttons (press and HOLD to fast adjust).

records

To save your adjustments, press and release the “set ” button again to adjust
the next preference. The preference set order is as follows:

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and the sensor are critical to the accuracy and
performance of this unit.

Display Placement

Place the display in a dry area free of dirt and dust. Display
stands upright for tabletop use and is wall-mountable.

AUTO DST CHANGE (YES, NO)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (°F or °C)
WIND SPEED UNITS (mph, km/h, knots)
RAINFALL UNITS (inches or mm)
PRESSURE UNITS (inHg or hPa)

*If you live in an area that observes Daylight Saving Time, DST should be set
to YES, even if it is not currently Daylight Saving Time.

You will automatically exit SET MODE if no buttons are pressed for 20 seconds.
Enter setup mode at any time by pressing the “ ” button.

set

Display Backlight Settings

This weather stationʼs color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (15%) brightness.

Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the “ ” button.

When display is powered with the power adapter, backlight remains on at
100% brightness. Press the “ ” button once to dim to 60% brightness. Press
again to dim to 15%. Press a 3rd time to enter “AUTO DIM” mode. The “ ”
icon appears to the left of the time to indicate that auto-dim mode is ON.

NOTE: Pressing and holding the “ ” button for 5 seconds will disable the

backlight. Once any button is pressed, the backlight will return to your selected
setting.

AUTO DIM MODE: Automatically adjusts display brightness based on time of day.

v

v

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct sunlight
and away from any heat sources or vents.

• Display and sensor(s) must be within 330 feet (100 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place units at least 3 feet (.9 m) away from
electronic devices (TV, computer, microwave, radio, etc.).

6:00 a.m. - 9:00 p.m. = 100% brightness

9:01 p.m. - 5:59 a.m.= 15% brightness

6 7

OPERATION

Using the Professional Weather Center
Learning Mode

Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over
a time period (called Learning Mode) to determine your altitude. After 14 days, the
“LEARNING” icon disappears from the display screen. At this point, the self-calibrated

pressure is tuned in to your location and the unit is ready for superior weather prediction.

Weather Forecast

AcuRiteʼs patented Self-Calibrating Forecasting provides your personal forecast of weather
conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard.

It generates a forecast with pinpoint accuracy - personalized for your exact location.

STORMY

& WINDY

(flashing=stormy)

View the complete list of icons at www.AcuRite.com/acurite-icons

SNOW

LIKELY

~

. . . . . .

. . . . . . .

SNOW / RAIN

MIX LIKELY

RAIN

LIKELY

c?;c?;

!l!l!l!l! ,, ,, ,, ,, I

CLOUDY

cC",

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This weather
center displays the current pressure with an arrow icon to indicate the direction the
pressure is trending (FALLING, STEADY, or RISING).

Moon Phase

Track the phases of the moon, conveyed through simple lunar phase icons:

Rainfall Tracking

This weather station features enhanced tracking of historical rainfall data.
Rain accumulation data is displayed for the current day, week, or month (most
recent rainfall total). Press the “ ” button to review historical rainfall records.

Records are shown in the following order:

TODAY RAIN TOTAL
THIS WEEK RAIN TOTAL
THIS MONTH RAIN TOTAL
PREVIOUS MONTHLY TOTALS WITH RAIN (up to 12 months prior)
CURRENT YEAR TOTAL
PREVIOUS YEAR TOTAL
ALL-TIME TOTAL

Rainfall Data

---

month week !today]

rain

TODAY WEEK

Displays rainfall

recorded TODAY

since 12:00am,

if applicable.

---

month [week] today [month] week today

weekʼs rainfall (Sunday to

rain

If there hasnʼt been any

rainfall today, the current

Saturday) is displayed, if

applicable.

---

rain

MONTH

If there hasnʼt been any

rainfall this week, the

current monthʼs rainfall is

displayed.

NEW WAXING 1ST FULL

•

CRESCENT QUARTER

8

3RD

QUARTER

WANING

CRESCENT

Rainfall Records

rain records

8.35

2019

CURRENT YEAR

TOTAL RAINFALL

(default)

rain records rain records

8.35 8.35

NOV

TOTAL RAINFALL ALL-TIME TOTAL RAINFALL

FOR MONTH SHOWN

9

ALL

Programmable Alarms Troubleshooting

This display features programmable alarms that sound an alert to notify you when a
value (for outdoor temperature, humidity, wind speed or rainfall) has been reached
or exceeded. When an alarm is triggered, the display emits an audible beep and
flashes data in the affected category. You can customize the alarms by turning ON
or OFF the alarms youʼd like activated or deactivated, and by inputting your own
values to trigger the alarm.

Problem Possible Solution

Setup an Alarm

1. Press and release the “ ” button until the reading for which you wish to set
an alarm is shown on the display. “ ” will not be shown.

2. Press and release the “ “ or “ “ buttons until “ ” appears.

3. Press and release the “
display.

4. Press and release the “ “ or “ “ buttons to adjust the alarmʼs value.

5. Press and release the “ ” button to save the alarm value.

6. Press and release the “ ” button to cycle to the next reading.

((<-t)))

(«-t)))

Q

“ button. The current alarm value will flash on the

set

A

ram

~s

~s

(«-t)))

set

(«-t)))

No outdoor sensor

reception

no bars

Tull

Disable an Alarm

1. Press and release the “ ” button until the reading for which you wish to
disable an alarm is shown on the display. “ ” will be shown.

2. Press and release the “ “ or “ “ buttons until “ ” appears.

3. Press and release the “ ” button to cycle to the next reading.

4. Repeat steps 1-3, as needed.

NOTE: To disable ALL alarms at once, press and HOLD the “ ” button for 10 seconds.

You will automatically exit alarm SET MODE if no buttons are pressed for 10
seconds. Enter alarm SET MODE at any time by pressing the “ ” button.

((<-t)))

(«-t)))

A

ram

(«-t)))

~

~

(«-t)))

(«-t)))

Outdoor

temperature

is flashing or

showing dashes

Inaccurate forecast

• Relocate the display and/or the 5-in-1 sensor.
The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet
(.9 m) away from electronics that may interfere with
the wireless communication (such as TVs, microwaves,
computers, etc).

• Use standard alkaline batteries (or lithium batteries
in sensor when temperature is below --4ºF/-20ºC). Do
not use heavy duty or rechargeable batteries.
It may take a few minutes for display and sensor to
synchronize after batteries are replaced.

• Synchronize the units:

1. Bring both the sensor and display indoors and
remove power adapter/batteries from each.

2. Reinstall batteries in outdoor sensor.

3. Reinstall power adapter/batteries in display.

4. Let the units sit within a couple feet of each other
for a few minutes to gain a strong connection.

Flashing of the outdoor temperature may be an
indication of wireless interference.

• Make sure the A-B-C switch in the battery
compartments of both the display and sensor are
switched to the same letter. You may choose A, B or
C; but both units must match to sync up. Sometimes
changing to a different channel can help.

• Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.

• Has Learning Mode icon disappeared from the
display? Learning Mode must complete before
forecast and pressure will be accurate.

• Allow unit to run continuously for 33 days. Battery
removal or resetting the display will restart Learning
Mode. After 14 days, forecast should be fairly
accurate, however Learning Mode calibrates for a
total of 33 days.

NOTE:

10 11

Troubleshooting

Care & Maintenance

Problem Possible Solution

• Make sure both the display and 5-in-1 sensor are
placed away from any heat sources or vents
(see page 7).

Inaccurate

temperature or

humidity

Display screen

not working

• Make sure both units are positioned away from
moisture sources (see page 7).

• Make sure 5-in-1 sensor is mounted at least 1.5 m
(5 ft) off of the ground.

• Calibrate indoor and outdoor temperature and
humidity (see page 7).

• Check that the power adapter is plugged into the
display and an electrical outlet.

• Check that the batteries are installed correctly.
Batteries may need to be replaced.

• Reset the display by pressing and holding the
RESET button for 10 seconds, located in the battery
compartment of the display. Date and time will need
to be entered after a reset.

If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or email
[e-mail] for assistance.

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away
from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Calibration

The indoor and outdoor temperature and humidity readings, and barometric pressure
can be calibrated on the display to improve accuracy. Calibration can improve
accuracy when sensor placement or environmental factors impact the data accuracy.

1. To access calibration mode, press AND HOLD the "Q-", "set", and"~

5 seconds.

"set" button to adjust the next

” button for

set

simultaneously for at least

2. To adjust the currently selected (Aashing) item, press and release the
buttons to calibrate the data value higher or lower from the actual reading.

3. To save your adjustments, press and release the
preference. The

The preference set order is as follows:
OUTDOOR TEMPERATURE
OUTDOOR HUMIDITY
INDOOR TEMPERATURE
INDOOR HUMIDITY
BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*

*To change from AUTO to MANUAL pressure mode and vice versa, press AND
HOLD the

mode selected, “AUTO” or “MANUAL”. Press and HOLD the “
5-7 seconds to return to AUTO mode.

After 5-10 seconds of inactivity, the display will save the adjustments and exit
calibration mode. Calibrations will be erased if the display is reset or if batteries
are removed and the power adapter is unplugged.

",..C" icon will remain illuminated next to calibrated values.

"set" button for 5-7 seconds. The display indicates the current pressure

NOTE:

” buttons

"Q-" or"~"

Watch the video at www.acurite.com/5in1

12 13

Specifications

TEMPERATURE RANGE

HUMIDITY RANGE

WIND SPEED
WIND DIRECTION

INDICATORS
RAINFALL

WIRELESS RANGE

OPERATING FREQUENCY
POWER

Indoor: 32 F; 0

ºF to 122º ºC to 50ºC

Indoor: 1 % to 99%
0 to 99 mph; 0 to 159 km/h

16 points

0.01 inches (0.25 mm) and up
330ft / 100m

depending on home construction materials

433 MHz

5V AC, 250mA adapter
3 x AAA alkaline batteries (optional)

Customer Support

AcuRite customer support is committed to providing you with best-in­class service. For assistance , please have the model number of this

product available and contact us in any of the following ways:

[e-mail]

Visit us at www.

► Installation Videos ► Register your Product
► Instruction Manuals ► Support User Forum
► Replacement Parts ► Submit Feedback & Ideas

AcuRite.com

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1-This device may NOT cause harmful interference, and
2-This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for helf).
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(sl.
Ojeration is subject to the following two conditions:

1 This device may not cause interference, and

!

2 This device must accept any interference received, including interference that may cause undesired operation of the device.

-

IMPORTANT

PRODUCT REGISTRATION

Register online to receive 1 year warranty protection

www.AcuRite.com

Limited 1-Year Warranty

AcuRite is a wholly owned subsidiary of Chaney
Instrument Company. For purchases of AcuRite
products, AcuRite provides the benefits and services set
forth herein. For purchases of Chaney products, Chaney
provides the benefits and services set forth herein.

We warrant that all products we manufacture under this
warranty are of good material and workmanship and, when
properly installed and operated, will be free of defects for a
period of one year from the date of purchase.

Any product which, under normal use and service, is proven
to breach the warranty contained herein within ONE YEAR
from date of sale will, upon examination by us, and at our sole
option, be repaired or replaced by us. Transportation costs and
charges for returned goods shall be paid for by the purchaser.
We hereby disclaim all responsibility for such transportation
costs and charges. This warranty will not be breached, and we
will give no credit for products which have received normal
wear and tear not affecting the functionality of the product,
been damaged (including by acts of nature), tampered,
abused, improperly installed, or repaired or altered by others
than our authorized representatives.

Remedy for breach of this warranty is limited to repair or
replacement of the defective item(s). If we determine that repair
or replacement is not feasible, we may, at our option, refund
the amount of the original purchase price.

THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY
FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES
OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN
ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY
AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE.

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

We expressly disclaim all liability for special, consequential,
or incidental damages, whether arising in tort or by contract
from any breach of this warranty. Some states do not allow the
exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.

We further disclaim liability from personal injury relating to
our products to the extent permitted by law. By acceptance of
any of our products, the purchaser assumes all liability for the
consequences arising from their use or misuse. No person, firm
or corporation is authorized to bind us to any other obligation
or liability in connection with the sale of our products.
Furthermore, no person, firm or corporation is authorized
to modify or waive the terms of this warranty unless done in
writing and signed by a duly authorized agent of ours.

In no case shall our liability for any claim relating to our
products, your purchase or your use thereof, exceed the
original purchase price paid for the product.

Applicability of Policy

This Return, Refund, and Warranty Policy applies only to
purchases made in the United States and Canada. For
purchases made in a country other than the United States or
Canada, please consult the policies applicable to the country in
which you made your purchase.

Additionally, this Policy applies only to the original purchaser
of our products. We cannot and do not offer any return,
refund, or warranty services if you buy products used or from
resale sites such as eBay or Craigslist.

Governing Law

This Return, Refund, and Warranty Policy is governed by the
laws of the United States and the State of Wisconsin. Any
dispute relating to this Policy shall be brought exclusively in the
federal or State courts having jurisdiction in Walworth County,
Wisconsin; and purchaser consents to jurisdiction within the
State of Wisconsin.

14 15

ACU

►

RITE®

Weather Temperature Weather Kitchen

Stations & Humidity Alert Radio Thermometers

It’s more than accurate, it’s

& Timers

ACU

►

RITE.

Clocks

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

Plan your day with confidence

.

™

www.AcuRite.com

© Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the
Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights

Printed in China

06096 INST 111919 Visit www.AcuRite.com/patents for details.

are the property of their respective owners. AcuRite uses patented technology.

14

-