AcuRite 06095 Instruction Manual
Instruction Manual
Display for 5-in-1 Weather Sensor
model 06095
OUTOOOR
"'
38%-
~
umrn [HILL
rw
'-I
Package Contents
1. Display with Tabletop Stand
2. Power Adapter
3. Instruction Manual
This product requires an AcuRite 5-in-1 Weather Sensor
(sold separately) to be operational.
IMPORTANT
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection
INDOOR
28%-
RAIN
1.22in,
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
www.AcuRite.com
Questions? Contact Customer Support at
www.AcuRite.com/support or email support@chaney-inst.com
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Features & Benefits
Display
6 3 2 4 1 5
wnrn [HILL
+---YJOF &
10 911 12 13 14 17 15 19 16 18
8 7
28
27 26 25 24
22 20
23
INDOOR
21
2 8 •-----+-¼, ..
RAIN
l.22i_n.---+-
1. Current Outdoor Temperature 15. Button
Arrow icon indicates direction Press to change the RAINFALL data
temperature is trending. being displayed (Week, Year, All-Time).
2. Outdoor Sensor Signal Strength
3. Sensor Low Battery Indicator
4. Current Outdoor Humidity
Arrow icon indicates direction
humidity is trending.
5. Date 19. AUTO DIM icon
6. Moon Phase
7. WEATHER SELECT
Displays heat index, dew point, wind
chill, feels like, and rainfall rate.
8. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
9. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls
data from your 5-in-1 sensor to
generate your personal forecast.
10. Rainfall Alert Indicator
Indicates rainfall of more than 1”
(25 mm) of rain in 2 hours or less.
11. Auto or Manual Pressure Mode
Indicates pressure mode preference. 28. Average Wind Speed
AUTO Pressure Mode
Pressure will self-calibrate over a
14 day Learning Mode.
MANUAL Pressure Mode
Indicates raw pressure value,
no adjustment for sea level (can be
calibrated).
12. Current Barometric Pressure
Arrow icon indicates direction
pressure is trending.
16. Rainfall History
17. Storm Alert Indicator
Activates when barometric
pressure drops.
18. Current Rainfall Total
Rainfall recorded since 12:00am.
Indicates display is in auto-dimming
brightness mode (see page 6).
20. Clock
21. Current Indoor Humidity
Arrow icon indicates direction
humidity is trending.
22. Display Low Battery Indicator
23. Current Indoor Temperature
Arrow icon indicates direction
temperature is trending.
24. Peak Wind Speed
Highest speed from past 60 minutes.
25. Current Wind Speed
26. Current Wind Direction
27. Previous 2 Wind Directions
Average of all speeds over the
past 2 minutes.
13. SELECT Button
Press to change the Weather Select
category data being display.
14. V, ,T Buttons
For setup preferences and access to
historical records.
2 3
Features & Benefits
2
3
4
1
8
SETUP
Display Setup
Set the A-B-C Switch
1
Locate the A-B-C switch inside the
•
battery compartment. Set the A-B-C
switch to A, B or C. You must select
the same letter choices for both the
sensor and the display in order for
the units to synchronize.
2
Install or Replace Backup
Batteries
•
1. Remove the battery
compartment cover.
(optional)
Display Setup
2. Insert 3 x AAA batteries into the
battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
3
Plug in Power Adapter
For the best performance, plug
•
in the power adapter as the main
power source for this product.
6
DISPLAY BACK
-8-
·,r
1. Backlight Button
For momentary backlight and dimmer
settings.
2
. In
tegrated Hang Holes
For easy wall mounting.
3. Backup Battery Compartment
4. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
5
5. Plug-in for Power Adapter
6. Battery Compartment Cover
7. Power Adapter
8. RESET Button
Press and release to clear historical record.
Press and hold for 10 seconds for full reset
to factory defaults.
7
A B C
IMPORTANT: Batteries are a backup power source to preserve records in the event of a
power outage. Power adapter is required as the primary power source to enjoy the full
functionality of this product.
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in flre, as batteries may explode or leok. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechorgeoble batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
A-B-C Switch
Set to match sensor's
ABC switch
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
Install Backup
Batteries
3 AAA Batteries
(optional)
Plug in
Power Adapter
4 5
Loading...