Wind Extension for AcuRite® Atlas
COMPONENTS
1. Wind Assembly
2. AcuRite Atlas outdoor device
REMOVE THE
1. 2.
WIND ASSEMBLY
TM
Model 06072
UNPLUG THE
CONNECTORS
3. Extension Base
4. Extension Cord
5. Cord Connector-A
1
2
B
A
On the AcuRite Atlas outdoor device, hold the
Wind Assembly firmly by the base, turn it
counter-clockwise to unlock, and lift to remove.
Caution: Do not lift or hold by the wind cups or
wind vane.
OPEN CONNECTION
3.
COMPARTMENT DOOR
Unplug the connector between the Wind Assembly
and AcuRite Atlas.
RUN CORD
4.
CONNECTOR-A
THROUGH
CONNECTION
COMPARTMENT
6. Cord Connector-B
7. Connection Compartment
8. Connection Compartment Door
7
9. Rubber Guard
Open the Connection Compartment Door on
the Extension Base.
PLUG CORD
CONNECTOR-B
5.
INTO CORD
CONNECTOR-A
Run Cord Connector-A on the Extension Cord
through the Connection Compartment in the
Extension Base.
6.
B
A
8
Slot for Cord
Connector stability.
Plug Cord Connector-B into the Wind Assembly’s
connector.
Combine the Wind Assembly with the Extension
Base by turning the Wind Assembly clockwise,
then firmly press the Connector into the strain
relief slot in the Connection Compartment
stability. Then, close the Connection Compartment.
for
MOUNT THE EXTENSION
7.
BASE TO POLE
Face the Connection
Compartment Door
RUN EXTENSION CORD
8.
TO OUTDOOR DEVICE
9.
Cord
Connector-B
SOUTH
Mount the combined Wind Assembly Extension
Base on a pole away from the AcuRite Atlas outdoor
device, within range of the Extension Cord. The
Connection Compartment Door should be facing
south to maintain proper wind direction orientation.
To maximize the accuracy of wind
measurements, the National Weather Service
recommends mounting anemometers 33 feet
(10 meters) above ground.
Avoid nearby wind obstructions such as trees
and buildings.
Be sure to mount the outdoor device
securely, as swaying or shaking may cause
inaccurate wind readings.
Run the Extension Cord from the Extension
Mount to the AcuRite Atlas outdoor device,
being sure to secure any extra slack. Be sure
to distribute the slack, as wrapping the cord
around itself several times in one location
could cause interference.
Plug Cord Connector-B into the AcuRite
Atlas outdoor device connector.
HAVING PROBLEMS?
We’re Here to Help.
Visit us online
www.AcuRite.com
Get more information or download the full
AcuRite Atlas™ product manual.
Contact Support
(877) 221-1252
Our friendly U.S. based support team is ready
to assist you.
Limited 1 Year Warranty
AcuRite is a wholly owned subsidiary of Chaney Instrument
Company. For purchases of AcuRite products, AcuRite provides
the benets and services set forth herein. For purchases of
Chaney products, Chaney provides the benets and services set
forth herein. We warrant that all products we manufacture under
this warranty are of good material and workmanship and, when
properly installed and operated, will be free of defects for a
period of one year from the date of purchase.
Any product which, under normal use and service, is proven to
breach the warranty contained herein within ONE YEAR from date
of sale will, upon examination by us, and at our sole option, be
repaired or replaced by us. Transportation costs and charges for
returned goods shall be paid for by the purchaser. We hereby
disclaim all responsibility for such transportation costs and
charges. This warranty will not be breached, and we will give no
credit for products which have received normal wear and tear not
aecting the functionality of the product, been damaged
(including by acts of nature), tampered, abused, improperly
installed, or repaired or altered by others than our authorized
representatives.
Remedy for breach of this warranty is limited to repair or
replacement of the defective item(s). If we determine that repair
or replacement is not feasible, we may, at our option, refund the
amount of the original purchase price.
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY
FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER
WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET
FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY
OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE.
We expressly disclaim all liability for special, consequential, or
incidental damages, whether arising in tort or by contract from
any breach of this warranty. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
We further disclaim liability from personal injury relating to its
products to the extent permitted by law. By acceptance of any of
our products, the purchaser assumes all liability for the
consequences arising from their use or misuse. No person, rm or
corporation is authorized to bind us to any other obligation or
liability in connection with the sale of our products. Furthermore,
no person, rm or corporation is authorized to modify or waive
the terms of this warranty unless done in writing and signed by a
duly authorized agent of ours.
In no case shall our liability for any claim relating to our products,
your purchase or your use thereof, exceed the original purchase
price paid for the product.
10.
The Rubber Guard helps prevent water and
debris from entering AcuRite Atlas. On the
AcuRite Atlas outdoor device, tuck in the
connected cord and place the Rubber Guard
over the hole.
Optional:
If AcuRite Atlas is
mounted on the
same pole as the
Wind Extension,
the Rubber Guard
can be cut to
accommodate the
pole’s diameter. If needed, carefully cut a
hole in the Rubber Guard just large enough
to fit around the pole.
©Chaney Instrument Co. All rights reserved. AcuRite is
a registered trademark of the Chaney Instrument Co.,
Lake Geneva, WI 53147. All other trademarks and copy-rights are
the property of their respective owners. AcuRite uses patented
technology. Visit www.AcuRite.com/patents for details.
QSG17_06072 101317