How It Works
AcuRite® Atlas™ is an
environmental monitoring station
that delivers key information
on current outdoor conditions
at its installation location. The
outdoor device contains sensors
that read temperature, humidity,
wind speed and direction, rainfall,
UV, light intensity, and optionally
lightning (requires optional
Lightning Detection Sensor; may
be purchased separately). These
readings are transmitted over a
433 MHz wireless radio frequency
to be received by the AcuRite
Atlas indoor HD display and/
or AcuRite® Access™. Readings
received by AcuRite Access can
be monitored and viewed online
from My AcuRite. Receivers may
not be included, and may be
purchased separately.
Set Up Your AcuRite® Atlas™
Verify Package Contents
1
•
AcuRite Atlas outdoor device 3. Mounting anchors & screws
1.
2. Mounting bracket
(for optional use) 4. Lightning Detection Sensor
1.
2.
(for optional use)
(optional; may be purchased
separately)
3.
4.
2
Device Components
Wind speed anemometer
1.
2. Mounting knob
3. Battery compartment
4. Solar cell
1
5. Bubble level
6. UV and light sensor
7. Rainfall collector
8. Wind direction vane
8
7
6
5
Install Batteries
2
•
Open the battery compartment, and insert four (4)
AA alkaline or lithium batteries. Lithium batteries are
recommended in low temperature conditions, especially
below -4°F (-20°C).
Note: Heavy duty or rechargeable batteries are not
recommended.
2
3
4
3