AcuRite 06043 Instruction Manual
Instruction Manual
Home Environment Display
model 06043
'loll SENSORB
,□
Of
' .,
Y3~
'loll SENSORC DISPLAY
y9:
Gr
WED 12:35pm
ACU>RITE
This product requires at least one AcuRite Sensor
(sold separately) to be operational.
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets................. 3
Setup .................................... 4
Set the Time, Date & Units ...... 5
Placement Guidelines ............. 6
Using the Display................... 6
'loll
6 ,Of
, ..
.%.
TOOJ.YS
lJWIS
s 1%
'-
,2°f
.%.
T00AY'S
LOWS
' .,
OI(
53~
10/25
Programmable Alarms............ 7
Troubleshooting ..................... 8
Care & Maintenance.............. 9
Calibration ............................ 9
Specications......................... 9
FCC Information .................... 9
Customer Support .................10
Warranty..............................10
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible
product performance, please read this manual in its entirety and retain it for
future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display with Tabletop Stand
2. Instruction Manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
Archived Products
Register a Product
►
2
Features & Benets
12 11 10 9 14 13
EN. 'f.lA
1
2
3
w
~n1
,u~
Ll3:
w N' RC DISPLAY
y9:
63~
IJED
ACU•RITE
6tj
....
"'°'"
T
5 ,~
,20f
L
~5
,. 53:
'-
'
10/i.'5
~
T
4 5 6 7 8 19
DISPLAY FRONT
1. Sensor Signal Strength
Signal strength detected for the indicated
external sensor (sold separately).
2. Current Temperature
Reported by indicated sensor. Arrow icon
indicates the direction the temperature
is trending.
3. Record Indicators
Indicates today’s high or low records are
being viewed.
4. Day of the Week
5. Clock
6. Humidity Level Indicator
Indicates a high, low or ideal humidity
level in the location of the display.
7. Date
8. Current Humidity
Reported by indicated sensor. Arrow
icon indicates the direction the humidity
is trending.
9. Low Battery Indicator
For the sensor that is reporting data for
the corresponding location.
10. Sensor Indicator
Identifies sensors by A-B-C channel
settings (see page 4).
15
16
17
18
-
-
-
-
-
cb
.J
~"'
-
...
-
...
..
•
-
-
-
-
-
-
-
-
•
11. RECORDS Button
Press to view today’s high and low records.
12. Alarm ON Indicator
Indicates alarm is activated to emit an
audible alert when conditions exceed
your presets (see page 7).
DISPLAY BACK
13. Integrated Hang Hole
For easy wall mounting.
14. SET Button
For setup preferences.
15.
and Buttons
For setup preferences.
16. Button
For alarm setup.
17. RESET Button
Full reset to factory defaults.
18. Battery Compartment
19. Foldout Tabletop Stand
20. Battery Compartment Cover
(not shown)
3
SETUP
Display Setup
1
Install Sensor Batteries & Set A-B-C Channel
BEFORE powering on the display, install batteries for all wireless sensors
•
(sold separately) that you would like to synchronize with the display.
NOTE: If pairing more than one wireless sensor with the display, the A-B-C
1,----
channel must differ between each sensor. Verify that each sensor has a different
channel selected by following the instructions in the corresponding sensor manual.
~~.:-------------=~-I
1
A-B-C
Channel
Install Sensor Batteries
& Set A-B-C Channel
= IDS CT S~~'h •
- A•B<: re= =
-~
- INDOOR °C/"F
= USEONLY =
~=
Install or Replace Display Batteries
2
1. Remove the battery compartment cover.
•
2. Insert 3 x AA alkaline batteries into the battery compartment, as shown.
Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.
2
Install Batteries
3 AA Batteries
•
A-B-C
Channel
. -.
.;
•
-
-
-
-
-
-
-
-
■
•
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
4
Loading...