Display for 5-in-1 Weather Sensor
Package Contents
1. Display with Tabletop Stand
2. Power Adapter
3. Instruction Manual
Instruction Manual
model 06022
This product requires an AcuRite 5-in-1 Weather Sensor
(sold separately) to be operational.
PRODUCT MUST BE REGISTERED
IMPORTANT
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection
TO RECEIVE WARRANTY SERVICE
www.AcuRite.com
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
1. Previous 2 Wind Directions
2. Current Wind Speed
3. Current Wind Direction
4. Current Indoor Temperature
Arrow icon indicates direction
temperature is trending.
5. Display Low Battery Indicator
6. Peak Wind Speed
Highest speed from the last
60 minutes.
7. Current Indoor Humidity
Arrow icon indicates direction
humidity is trending.
8. Wind Speed Alert Indicator
Activates when wind speed is over
50 mph.
9. Clock
10. Rainfall Alert Indicator
Indicates rainfall of more than 1”
(25 mm) of rain in 2 hours or less.
11. AUTO DIM Indicator
Indicates display is in auto-dimming
brightness mode (see page 6).
12. Current Rainfall Total
Accumulates data during rainfall.
13. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data
from your 5-in-1 sensor to generate
your personal forecast.
14. Storm Alert Indicator
Activates when barometric
pressure drops.
15. Month/Year/All-Time Rainfall
16. Current Barometric Pressure
Arrow icon indicates direction
pressure is trending.
17. RAINFALL Button
Press to change the RAINFALL
data being displayed (Month,
Year, All-Time).
18. T and VButtons
For setup preferences.
19. SET Button
For setup preferences.
20. SELECT Button
Press to change the WEATHER SELECT
category data being displayed.
21. Weather Ticker
TM
22. Heat Index/ Wind Chill
Alert Indicator
Activates when heat index rises over
90ºF (32ºC) or when wind chill drops
below -17ºF (-27ºC).
23. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
24. WEATHER SELECT
Displays heat index, dew point, wind
chill, feels like, days with rain this
month, and days since last recorded
rainfall.
25. Date
26. Current Outdoor Humidity
Arrow icon indicates direction
humidity is trending.
27. Average Wind Speed
Average wind speed over the past
2 minutes.
28. 5-in-1 Sensor Signal Strength
29. Sensor Low Battery Indicator
30. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
3
1
2
3
6
5
4
7
BACK OF DISPLAY
1. Integrated Hang Hole
For easy wall mounting.
2. Button
For dimmer control while using power
adapter. Activates momentary
backlight while on battery power.
3. Plug-in for Power Adapter
4. Removable Tabletop Stand
5. CLEAR ALL/RESET Button
Press and HOLD for 10 seconds
for full reset to factory defaults.
6. A-B-C Switch
ID code that must match 5-in-1
sensor’sA-B-Cswitchtoensure
units synchronize.
7. Power Adapter
8. Battery Compartment Cover
(not shown)
4
SETUP
Display Setup
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
Set the A-B-C Switch
1
The A-B-C switch is located inside
the battery compartment. It can be
set to A, B or C. However, you must
select the same letter choices for
both the sensor and the display in
order for the units to synchronize.
1
A B C
Plug Power Adapter into
2
Electrical Outlet
Install or Replace Batteries
3
(optional)
Insert 6 x AA alkaline batteries
into the battery compartment,
as shown. Follow the polarity
(+/-) diagram in the battery
compartment.
Install Backup
3
Batteries
(optional)
6 AA Batteries
Plug in Power
2
Adapter
IMPORTANT: Batteries are a backup power source to preserve records in the event of
a power outage. Power adapter is the recommended primary power source to enjoy
the full functionality of this product.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
5